Abstract:X-ray detection is widely utilized in our daily life, such as in medical diagnosis, security checking, and environmental monitoring. However, most of the commercial X-ray detectors are based on inorganic semiconductors, e.g., Si, CdTe, and Ge, which require complex and costly fabrication processes. Metal halide perovskites have recently emerged as a set of promising candidates for ionizing radiation detection, owing to the high attenuation coefficient, long carrier lifetime, and excellent charge transport properties. Perovskite single crystals have been successfully implemented in X-ray detection, but the fragile single crystals limit the device fabrication and the integration with a read-out circuit. In addition, it is hard to reach inch-size single crystals for real application. Flexible devices based on perovskite films or composite films have also been reported, but either the thickness or charge transport properties are limited by the solution processes. In this work, we introduced thermal co-evaporation to deposit highly efficient formamidinium lead iodide perovskite films. Considering the trade-off between X-ray absorption and charge transport, we optimized the active layer thickness and achieved large-area and flexible X-ray detectors with state-of-the-art device performance, including extremely low dark current and noise, fast response, and high sensitivity of 142.1 μC Gyair–1 cm–2.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20973?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20973</a>.Photographs of the front and back of a large-area, evaporated perovskite films deposited on the flexible PET substrate; the device performance statistics of perovskite photodiodes; the J–V characteristics of multiple photodiodes and typical EQE spectra of the optimized photodiode; SEM images; the comparison of the sensitivity of the evaporated perovskite X-ray detectors with various thicknesses; the temporal response of the optimized EPXDs with active layer thickness; and the long-term device stability of the optimized EPXDs encapsulated with a cover glass (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20973/suppl_file/am0c20973_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Spontaneous Cooling Enables High‐Quality Perovskite Wafers for High‐Sensitivity X‐Ray Detectors with a Low‐Detection Limit

Large Scale Lead‐Free Perovskite Polycrystalline Wafer Achieved by Hot‐Pressed Strategy for High‐Performance X‐Ray Detection

Ultrasound‐Assisted Crystallization Enables Large‐Area Perovskite Quasi‐Monocrystalline Film for High‐Sensitive X‐ray Detection and Imaging

Printable thick junction-based lead-free perovskite single crystal powders for X-ray detection

Large and Dense Organic-Inorganic Hybrid Perovskite CH3NH3PbI3 Wafer Fabricated by One-Step Reactive Direct Wafer Production with High X-ray Sensitivity.

Smooth and Compact All‐Inorganic Perovskite Based Heterojunction Films Enabled by Nanocomposite‐Buffered Thermal Imprint for Highly Sensitive X‐Ray Detection

Space‐Confined Growth for Thickness‐Controlled Cs3Bi2I9 Perovskite Single Crystal Wafers for X‐Ray Detectors

Epitaxial Growth of Lead‐Free 2D Cs3Cu2I5 Perovskites for High‐Performance UV Photodetectors

Vapor-deposited lead-free all-inorganic perovskite films with ultralow dark current for sensitive and stable X-ray detection

Steady‐State Inverse‐Temperature Crystallization Enabling Low Defect Perovskite Single Crystal and Efficient X‐Ray Detectors

Wafer-Scale Photolithography-Pixeled Pb-Free Perovskite X-ray Detectors.

Polycrystalline hybrid perovskite with enhanced ordered crystal domains for sensitive X-ray detection

CsPbIBr2 Thick Film With (100)‐Preferred Orientation Enables Highly Sensitive X‐Ray Detector by a Spray‐Coating Method via Dual‐Additive‐Assisted Solution Strategy under Atmospheric Environment

Silicone‐Assisted Autonomous Growth of Strainless Perovskite Single Crystals for Integrated Low‐Dose X‐Ray Imaging Arrays

Evaporated Perovskite Thick Junctions for X-Ray Detection

An aerosol-liquid-solid process for the general synthesis of halide perovskite thick films for direct-conversion X-ray detectors

Direct drop-casting synthesis of all-inorganic lead and lead-free halide perovskite microcrystals for high-performance photodetectors

High‐Performance and Self‐Powered X‐Ray Detectors Made of Smooth Perovskite Microcrystalline Films with 100 Μm Grains

Oriented 2D Perovskite Wafers for Anisotropic X‐ray Detection through a Fast Tableting Strategy

Crystalline Orientation Control Enhanced Adhesion of Perovskite to Large‐Area Readout Board for High‐Performance X‐Ray Imaging

Enabling robust broad-spectrum photodetection with ultra-high responsivity through vapor growth of 2D all-inorganic lead-free Cs 2 SnI 6 perovskites