Abstract:Scramjet engines are one of the most economical and reliable high-speed airbreathing propulsion technologies that can be used for low-cost satellite launchers and hypersonic atmospheric transportation. For access to space, the flight envelope practically comprises varying freestream conditions and altitude during ascent flight, constituting a complex optimization problem subject to various constraints from design and operation perspectives. This paper presents the results and insights obtained from a multi-objective optimization study of three classes of axisymmetric scramjet intakes, i.e., three-ramp, Busemann-based, and generic intakes represented by smooth Bézier curves, with the same intake mass flow rate for all classes. Optimization is conducted by means of surrogate-assisted evolutionary algorithms coupled with computational fluid dynamics simulations using a Reynolds-averaged Navier–Stokes flow solver for steady-state flowfields. It aims to minimize the intake drag and maximize the compression efficiency at Mach 7.7 at an altitude of 30 km simultaneously. It has been found that generic intakes, which offer greater local shape control, can achieve the highest compression efficiency of 94.8%, the highest total pressure recovery, and the highest flow uniformity at the intake exit. The Busemann-based intakes, on the other hand, can produce the highest static pressure ratio while incurring the lowest drag force. The utility of principal component analysis has effectively reduced the dimensions of the solutions, and has identified clusters of non-dominated solutions according to their characteristics such as geometric attributes, exit flow profiles, and wall property distributions, thereby conducing to obtain further physical insights into the optimal configurations.

Influence of Geometric Parameters on Intake Performance of 3D Ramp‐Type Scramjet Inlet

Design optimization and off-design performance analysis of axisymmetric scramjet intakes for ascent flight

SHOCK INDUCED SEPARATING FLOWS IN SCRAMJET INTAKES

Conceptual Design and Optimization of Scramjet Engines Using the Exergy Method

Dynamic multi-objective optimization of scramjet inlet based on small-sample Kriging model

Performance Analysis of Dual-Channel Inward-Turning Inlets under Off-Design Conditions

Performance Impact of Uncertain Variations of Inlet Flow for Axial Compressor Blades

Impact of Inlet Flow Angle Variation on the Performance of a Transonic Compressor Blade Using NIPC

Optimization Design for Supersonic Inlet Structure Parameter

Performance of a Jaws Inlet under Off-Design Conditions

Study of geometric parameters for the design of short intakes with fan modelling

Design and examination of a turboprop inlet with scavenge duct

A nacelle inlet design approach with more three-dimensional geometric consideration

Monte Carlo Simulation of Inlet Flows in Atmosphere-Breathing Electric Propulsion

A Fast Multiobjective Optimization Approach to S-duct Scoop Inlets Design with Both Inflow and Outflow

Scramjet Intake Aerodynamic Studies Using Sharp Interface Immersed Boundary Method

Optimal Design of Inlet Passage for Waterjet Propulsion System Based on Flow and Geometric Parameters

Optimization of scramjet inlet based on temperature and Mach number of supersonic combustion

Design Procedure of a Variable Rectangular Inlet for TBCC Engine Considering Mass Flow Requirements

Research on the Criteria for Determining the Starting Performance of an Inward-Turning Inlet by Integrating the Concept of the Equivalent Contraction Ratio

Design space investigations of scramjet engines using reduced-order modelling