Water vapor pressure calculation.

R. Brouillard,J. Hall

DOI: https://doi.org/10.1152/JAPPL.1985.58.6.2090

1985-06-01

Journal of Applied Physiology

Abstract:Accurate calculation of water vapor pressure for systems saturated with water vapor can be performed using the Goff-Gratch equation. A form of the equation that can be adapted for computer programming and for use in electronic databases is provided.

Chemistry,Medicine,Physics

What problem does this paper attempt to address?

Thermodynamic properties calculation method for moist air: 173 to 647 K

陈坚红,袁智,盛德仁,李蔚

DOI: https://doi.org/10.3785/j.issn.1008-973X.2012.04.004

2012-01-01

Abstract:A new method was proposed in order to precisely calculate the thermodynamic properties for moist air in wide range of temperature and pressure. The semiempirical model with Virial state equation was used to construct mathematical model of the thermodynamic properties of moist air. Calculation method included newest developments: latest research progress of Virial coefficients; up-to-date formulation of saturation pressure; recent formulation for specific enthalpy, specific entropy and specific volume of steam released by the International association for the properties of water and steam (IAPWS); current values for molar masses and gas constants. A new method was used to calculate the thermodynamic properties of moist air from 173 to 647 K. The results were compared with the data offered by reference [7, 8, 17, 18]. Maximum errors of specific enthalpy, specific entropy and specific volume were 1.10%, 3.5% and 1.89%.
Calculation modeling of the water vapor saturation curve of moist air and its analysis

Wang Ting,Gu Bo,Qiu Feng

DOI: https://doi.org/10.3969/j.issn.1001-7100.2010.05.012

2010-01-01

Abstract:In high-precision calculating moist air properties,calculation model of the water vapor saturation curve of moist air is the key.This paper compared errors of different formulas of the water vapor saturation pressure which were already presented,and the error of Gerry equation was the least.For the accuracy and continuity of the model,the dividing point between Gerry's ice equation and liquid equation was redefined.Then,two types of rigorous t-p formulas were developed for computing dew point temperature.Finally,the significance of the slope of the saturation curve was analyzed,and the slope's formula is derived.The calculation model established above could not only calculate moist air properties quickly and accurately,but also provide a formulation discriminating state change processes of moist air.
Water vapor transport to material surfaces-Simplified analytical expressions for non-linear material properties

Carl-Eric Hagentoft

DOI: https://doi.org/10.1051/matecconf/201928202002

2019-01-01

MATEC Web of Conferences

Abstract:The water vapour transfer between the indoor air and material surfaces is of importance for the moisture balance of the room. It can also be important for the moisture content and durability of the material surface layer such as artefacts in churches and historical buildings. For most building materials the penetration depth due to short time fluctuations, such as diurnal ones, is very limited. For these cases the assumption of semi-infinite analysis gives accurate results even for a rather thin material layer. In the paper, the moisture profile and surface moisture uptake are modelled in detail for isothermal cases and strongly non-linear material properties for the sorption isotherm and vapor permeability. An approximative formula is given for a quite accurate estimate of the moisture up take for a demonstration case with a strongly non-linear material.
Segment Calculation of Thermodynamic Properties for Moist Air in Wide Range of Temperature and Pressure

袁智,陈坚红,盛德仁,李蔚,杨扬,周晓宇

2011-01-01

Abstract:A segment calculation method is being presented for thermodynamic parameters of moist air in wide range of temperature and pressure.At relatively low temperature and pressure,the moist air is considered as ideal mixed gas,and its thermodynamic properties are calculated with models based on ideal gas equations;whereas,at relatively high temperature and pressure,the moist air is considered as a mixture of dry air and water vapor,and its thermodynamic properties are calculated with semi-empirical models based on Virial state equations.The demarcation point of segment calculation has been analyzed and determined,while the continuity demonstrated.Results show that compared with some reference data,the maximum error of calculated results obtained by above segment method is only 4.5%,and the calculation process is found to be fast and facile,which may therefore be used to draw relevant psychrometric charts.
Density Equation for Saturated 3 He

Y. H. Huang,G. B. Chen,X. Y. Li,V. Arp

DOI: https://doi.org/10.1007/s10765-005-5574-6

2005-01-01

International Journal of Thermophysics

Abstract:A density equation for saturated vapor and liquid 3He is presented based on 205 experimental measurements for temperatures greater than 0.2 K collected after a careful survey of the literature. The average deviation of the densities predicted by the equation against the experimental values is 0.39%. There are only 16 points with deviations larger than 1%. This equation is valid for both liquid and vapor densities of 3He up to the critical temperature of 3.3157 K. The form of the equation satisfies known scaling laws approaching the critical point, with β=0.3653. In the low-density limit, the vapor curve of our equation matches smoothly to the published virial equation density at a temperature of 1.62 K and at the saturation pressure. The rectilinear density deviates from the critical density by less than 0.28% down to 0.48 K.
Clausius‐Clapeyron Equation

H. Jenkins

DOI: https://doi.org/10.1002/9780470697733.CH26

2008-04-07

Abstract:introduction The relationship between the vapor pressure of a liquid and the temperature is shown graphically as: Temperature Vapor Pressure The same data, if " massaged " , that is, expressed in a different manner, can be shown graphically as a straight line: This linear relationship can be expressed mathematically as ln P = − ∆H vap R 1 T       + C (1) where ln P is the natural logarithm of the vapor pressure, ∆H vap is the heat of vaporization, R is the universal gas constant (8.31 J·K-1 mol-1), T the absolute temperature, and C a constant (not related to heat capacity). This is the Clausius-Clapeyron equation, which gives us a way of finding the heat of vaporization, the energy that must be supplied to vaporize a mole of molecules in the liquid state. A plot of ln P vs. 1/T has the form of a straight line. Compare equation (1) to y = mx + b (2) which is the equation for a straight line. In equation (1), ln P is y, 1/T is x, and-∆H vap /R is m. In today's experiment, you will measure the vapor pressure of water over a range of temperatures, plot the data, measure the slope of the line, and then calculate ∆H vap for water. The method you will use to measure the vapor pressure will require careful readings of the volume of air and water vapor in an inverted graduated cylinder immersed in a beaker of water. You will half fill the graduated cylinder with water, and then immerse it upside down in enough water to cover the cylinder. Then you will warm the water in the beaker. As the temperature increases, the air in the graduated cylinder expands, and the vapor pressure of the water increases. Once the water in the beaker reaches a high enough temperature, the assembly is allowed to cool. A series of volume and temperature readings are taken, and then the water in the beaker is iced. At ice temperatures, the vapor pressure of water is negligible. The volume at that point is due to the air alone, within the limits of the measurements. This volume is recorded. Using the gas law equation, the number of moles of air in the cylinder is calculated: n = PV cold RT cold (3) Then, for each of the other temperatures and …

Chemistry,Physics
A practical density equation for saturated vapor of helium-3 from 0.01 K to the critical point

S.Q. Wang,G.B. Chen,Y.H. Huang

DOI: https://doi.org/10.1016/j.cryogenics.2007.09.001

IF: 2.134

2008-01-01

Cryogenics

Abstract:Based on the ideal gas state equation and the saturated vapor pressure equation of helium-3, a saturated vapor density equation is proposed, which can be applied for calculating the saturated vapor density of helium-3 from 0.01K to the critical temperature. Above 1.4K, the average deviation between the results by this equation and experimental data is about 0.66% and the maximum is 2%. Below 1.4K, the results of this work show a comfortable agreement with those by virial state equation (the deviations are generally within 0.1%). Based on this new vapor density equation, the compressibility factor of saturated vapor is determined and the vaporization heat is calculated.
Extension of the IAPWS-95 formulation and an improved calculation approach for saturated properties

Shide Mao,Zhenhao Duan,Jiawen Hu,Zhigang Zhang,Lanlan Shi

DOI: https://doi.org/10.1016/j.pepi.2011.01.003

IF: 2.748

2011-01-01

Physics of The Earth and Planetary Interiors

Abstract:The IAPWS-95 formulation explicit in Helmholtz free energy proposed by Wagner and Pruß (The IAPWS formulation 1995 for the thermodynamic properties of ordinary water substance for general and scientific use, Journal of Physical and Chemical Reference Data 2002 31(2), 387–535) is extended to calculate the volumetric property of the fluid water from 1GPa and 273K to 20GPa and 4273K. Comparison with large experimental and molecular dynamic simulation data above 1GPa shows that the equation of state can reproduce the volume of the fluid water with an average absolute deviation of 0.52%. Thus the original IAPWS-95 formulation together with the extended part can be used in a much larger temperature–pressure region: 273–4273K and 0–20GPa. In addition, this paper also reports a reliable and highly efficient method to calculate the saturated properties of water so that the equation of state can be conveniently applied in the study of fluid inclusion: calculating homogenization pressures, homogenization densities (or molar volumes) and isochores. Computer code of the model can be obtained from the first author.
Non-gray Radiative Spectral Absorption Coefficient of Water Vapor

Tan He-ping

2001-01-01

Abstract:Thermal radiation has a remarkable influence on chemical dynamics of combustion and structure of flame because it affects directly on temperature.The non-gray property of gas radiation must be considered when the radiation energy transport of flame combustion is calculated.In approximate calculation of radiation transport differential equation absorption coefficient is a fundamental parameter.Based on this,when the total pressure is 0.1 MPa,spectral radiative properties of water vapor are investigated in a gas temperature range of 300～2 500 K,a pressure path length range of 0.01～1.0 MPa·m and partial pressure rang 0.0～0.1 MPa.By simplifying the Edwards exponential wide-band model,spectral parameters of bands radiative properties (including band spectral absorption coefficient,upper and lower band limits) are obtained.
A Simple Generic Model for Estimating Saturated Vapor Pressure

Aliakbar Roosta,Javad Hekayati

DOI: https://doi.org/10.1080/00986445.2015.1135428

2016-01-19

Chemical Engineering Communications

Abstract:Arguably, the most important of the basic thermodynamic properties of fluids, vapor pressure has been the focus of investigation for over a century. The two main drawbacks of the models currently used for its correlation are that they either exhibit large deviations near critical temperature and triple point or that they have a large number of compound-specific adjusted parameters and hence the inconvenient necessity of having at hand large tabulations of hundreds of model parameters. In this study, by employing the up and coming procedure of genetic programming, a new model, which to a large extent remedies these shortcomings, is proposed. Essentially, having only two compound-specific adjusted parameters and also using two readily available substance parameters of molecular weight and normal boiling point ensure a high level of convenience, yet precision and applicability over a large portion of the vapor–liquid coexistence curve. Concisely, a sizable database comprised of 58,272 data points was gathered for 243 organic and inorganic compounds and elements belonging to a diverse set of chemical families; these were then used in both developing and validating the proposed model and reporting generic and compound/element-specific adjusted parameters. Average absolute relative deviations (AARDs) of 1.47% (for a subset of 40,852 data points) and 1.82% (for a subset of 17,420 data points) for the general model and a slightly modified model applicable to hydrogen-bonded alcohols and phenols, respectively, are a testament to the reliability of the new proposed model.

engineering, chemical
Composition and Thermodynamic Properties of High Temperature Mixtures of Carbon and Water Vapour

W. Z. Wang,J. D. Yan,A. B. Murphy,J. W. Spencer,M. Z. Rong,M. T. C. Fang

2011-01-01

Abstract:The calculated values of composition and thermodynamic properties of mixtures of carbon and water vapour taking into account the condensed phase, in a wide temperature range 300K similar to 30000K, are presented in this paper. Equilibrium particle concentrations and thermodynamic properties are determined by the method of Gibbs free energy minimization, using standard thermodynamic tables. The influence of mixing ratio of carbon and water vapour as well as the pressure on particle concentrations and thermodynamic properties are studied in this work. It is found the chemical reactions (dissociation, ionization) contribute greatly to the thermodynamic properties.
Calculation of Volume Properties for Saturated Vapour by Using the Modified Truncated Virial Equation

Jingshan Tong,Guanghua Gao

DOI: https://doi.org/10.1007/bf02653189

1995-01-01

Abstract:In this paper, a molecular aggregation function which represents the degree of molecular aggregation is derived based on statistical mechanic method. Then, a truncated virial equation is modified by the molecular aggregation theory. The proposed extended equation of state gives good representation of the PVT properties of saturated vapors for some strong polar fluids including water, alcohols and carboxylic acid etc.
Estimation of the Vaporization Heat

Jing Fan,Xiaoming Zhao,Zhigang Liu

DOI: https://doi.org/10.1016/j.fluid.2011.09.024

IF: 2.745

2012-01-01

Fluid Phase Equilibria

Abstract:In the present work, a new equation for estimating vaporization heat was developed by applying wagner vapor pressure equation and using the Clausius–Clapeyron equation. The new proposed equation was valid over the entire range from the triple point to the critical point for most of the substances. The vaporization heat of 76 pure liquids was calculated to verify the new equation, with the average absolute deviation 0.80%, compared with the literature values.
Condensation of water vapor in the gravitational field

Victor G. Gorshkov,Anastassia M. Makarieva,Andrei V. Nefiodov

DOI: https://doi.org/10.1134/S106377611209004X

2012-08-13

Abstract:Physical peculiarities of water vapor condensation under conditions of hydrostatic equilibrium are considered. The power of stationary dynamic air fluxes and the vertical temperature distribution caused by condensation on large horizontal scales are estimated.

Fluid Dynamics,Atmospheric and Oceanic Physics
H2O saturated phase change threshold under molecular free path scale

Ze-peng Ming,You-hong Liu,Zhen-yuan Wu,Xiao-Wang Zhao,Zhi-Hui Li

DOI: https://doi.org/10.1016/j.vacuum.2022.111167

IF: 4

2022-09-01

Vacuum

Abstract:The distribution of droplet and crystal is a key point in space engine plume flow research. Plume flow in vacuum may have great gas molecular free path, thus resulting in non-continuum and LTE (local thermal equilibrium). To obtain understanding on more general H2O phase change threshold, this article establishes a Gibbs phase calculation method. Internal pressure is proposed as a new concept to be distinguished from static pressure. The effect of vapor transitional temperature Tg−tran, vapor rotational temperature Tg−rot, phase change surface temperature Tneu and space characteristic length L on H2O phase change threshold is investigated. According to the results, phase change is more hard for non-continuum vapor than continuum one. Under TE (thermal equilibrium), the saturated phase change boundary line for H2O deflect toward low temperature side when the vapor number density is low. Under LTE, vapor can transform to water under the vapor number density below three phase point in LTE circumstances, which is impossible under TE situation. Tg−tran, Tg−rot and Tov shows different influence degree on the H2O phase change threshold, whose degree order from large to low is: vapor thermodynamics temperature Tg−ov, vapor transitional temperature Tg−tran and vapor rotational temperature Tg−rot.

materials science, multidisciplinary,physics, applied
Pressure Calculation in Polar and Charged Systems using Ewald Summation: Results for the Extended Simple Point Charge Model of Water

Gerhard Hummer,Niels Grønbech-Jensen,Martin Neumann

DOI: https://doi.org/10.1063/1.476834

1998-06-24

Abstract:Ewald summation and physically equivalent methods such as particle-mesh Ewald, kubic-harmonic expansions, or Lekner sums are commonly used to calculate long-range electrostatic interactions in computer simulations of polar and charged substances. The calculation of pressures in such systems is investigated. We find that the virial and thermodynamic pressures differ because of the explicit volume dependence of the effective, resummed Ewald potential. The thermodynamic pressure, obtained from the volume derivative of the Helmholtz free energy, can be expressed easily for both ionic and rigid molecular systems. For a system of rigid molecules, the electrostatic energy and the forces at the atom positions are required, both of which are readily available in molecular dynamics codes. We then calculate the virial and thermodynamic pressures for the extended simple point charge (SPC/E) water model at standard conditions. We find that the thermodynamic pressure exhibits considerably less system size dependence than the virial pressure. From an analysis of the cross correlation between the virial and thermodynamic pressure, we conclude that the thermodynamic pressure should be used to drive volume fluctuations in constant-pressure simulations.

Chemical Physics,Soft Condensed Matter,Statistical Mechanics,Computational Physics
Survey of Experimental Data and Assessment of Calculation Methods of Properties for the Air–water Mixture

X Ji,X Lu,J Yan

DOI: https://doi.org/10.1016/s1359-4311(03)00191-1

IF: 6.4

2003-01-01

Applied Thermal Engineering

Abstract:Thermodynamic properties of the air–water mixture at elevated temperatures and pressures are of importance in the design and simulation of the advanced gas turbine systems with water addition. In this paper, comprehensive available experimental data and calculation methods for the air–water mixture were reviewed. It is found that the available experimental data are limited, and the determined temperature is within 75 °C. New experimental data are needed to supply in order to verify the model further. Three kinds of models (ideal model, ideal mixing model and real model) were used to calculate saturated vapor composition and enthalpy for the air–water mixture, and the calculated results of these models were compared with experimental data and each other. The comparison shows that for the calculation of saturated vapor composition, the reliable range of the ideal model and ideal mixing model is up to 10 bar. The real model is reliable over a wide temperature and pressure range, and the model proposed by Hyland and Wexler is the best one of today. However, the reliability of the Hyland and Wexler model approved by experimental data is only up to 75 °C and 50 bar, and it is necessary to propose a new predictive model based on the available experimental data to be used up to elevated temperatures and pressures. In the calculation of enthalpy, compared to the ideal model, the calculated results of the ideal mixing model are closer to those of real model.
The advection-condensation model and water vapour PDFs

Jai Sukhatme,William R. Young

DOI: https://doi.org/10.48550/arXiv.1105.0470

2011-05-03

Abstract:The statistically steady humidity distribution resulting from an interaction of advection, modeled as an uncorrelated random walk of moist parcels on an isentropic surface, and a vapour sink, modeled as immediate condensation whenever the specific humidity exceeds a specified saturation humidity, is explored with theory and simulation. A source supplies moisture at the deep-tropical southern boundary of the domain, and the saturation humidity is specified as a monotonically decreasing function of distance from the boundary. The boundary source balances the interior condensation sink, so that a stationary spatially inhomogeneous humidity distribution emerges. An exact solution of the Fokker-Planck equation delivers a simple expression for the resulting probability density function (PDF) of the water vapour field and also of the relative humidity. This solution agrees completely with a numerical simulation of the process, and the humidity PDF exhibits several features of interest, such as bimodality close to the source and unimodality further from the source. The PDFs of specific and relative humidity are broad and non-Gaussian. The domain averaged relative humidity PDF is bimodal with distinct moist and dry peaks, a feature which we show agrees with middleworld isentropic PDFs derived from the ERA interim dataset.

Fluid Dynamics,Atmospheric and Oceanic Physics,Data Analysis, Statistics and Probability
A HELMHOLTZ EQUATION OF STATE FOR DIMETHYL ETHER

Jiang-Tao WU,Yong ZHOU

DOI: https://doi.org/10.3321/j.issn:0253-231X.2009.12.005

2009-01-01

Kung Cheng Je Wu Li Hsueh Pao/Journal of Engineering Thermophysics

Abstract:In this work, the vapor pressure equation, saturated liquid density equation, saturated vapor density equation and Helmholtz equation of state for dimethyl ether are developed by genetic optimization algorithm combined with a weighted least-square fit of selected experimental data based on extensive collection of DME's experimental data. The average absolute deviation of vapor pressure equation, saturated liquid density equation and saturated vapor density equation is 0.50%, 0.38% and 0.55%, respectively. The uncertainty in density of the equation of state ranges from 0.1% in the liquid to 1% near the critical point.
New Calculation Method for Thermodynamic Properties of Humid Air in Humid Air Turbine Cycle – the General Model and Solutions for Saturated Humid Air

Zidong Wang,Hanping Chen,Shilie Weng

DOI: https://doi.org/10.1016/j.energy.2013.05.037

IF: 9

2013-01-01

Energy

Abstract:The article proposes a new calculation method for thermodynamic properties (i.e. specific enthalpy, specific entropy and specific volume) of humid air in humid air turbine cycle. The research pressure range is from 0.1 MPa to 5 MPa. The fundamental behaviors of dry air and water vapor in saturated humid air are explored in depth. The new model proposes and verifies the relationship between total gas mixture pressure and gas component pressures. This provides a good explanation of the fundamental behaviors of gas components in gas mixture from a new perspective. Another discovery is that the water vapor component pressure of saturated humid air equals PS, always smaller than its partial pressure (f·PS) which was believed in the past researches. In the new model, “Local Gas Constant” describes the interaction between similar molecules. “Improvement Factor” is proposed for the first time by this article, and it quantitatively describes the magnitude of interaction between dissimilar molecules. They are combined to fully describe the real thermodynamic properties of humid air. The average error of Revised Dalton's Method is within 0.1% compared to experimentally-based data.

Water vapor pressure calculation.

Thermodynamic properties calculation method for moist air: 173 to 647 K

Calculation modeling of the water vapor saturation curve of moist air and its analysis

Water vapor transport to material surfaces-Simplified analytical expressions for non-linear material properties

Segment Calculation of Thermodynamic Properties for Moist Air in Wide Range of Temperature and Pressure

Density Equation for Saturated 3 He

Clausius‐Clapeyron Equation

A practical density equation for saturated vapor of helium-3 from 0.01 K to the critical point

Extension of the IAPWS-95 formulation and an improved calculation approach for saturated properties

Non-gray Radiative Spectral Absorption Coefficient of Water Vapor

A Simple Generic Model for Estimating Saturated Vapor Pressure

Composition and Thermodynamic Properties of High Temperature Mixtures of Carbon and Water Vapour

Calculation of Volume Properties for Saturated Vapour by Using the Modified Truncated Virial Equation

Estimation of the Vaporization Heat

Condensation of water vapor in the gravitational field

H2O saturated phase change threshold under molecular free path scale

Pressure Calculation in Polar and Charged Systems using Ewald Summation: Results for the Extended Simple Point Charge Model of Water

Survey of Experimental Data and Assessment of Calculation Methods of Properties for the Air–water Mixture

The advection-condensation model and water vapour PDFs

A HELMHOLTZ EQUATION OF STATE FOR DIMETHYL ETHER

New Calculation Method for Thermodynamic Properties of Humid Air in Humid Air Turbine Cycle – the General Model and Solutions for Saturated Humid Air