Influence of torrefaction with Mg-based additives on the pyrolysis of cotton stalk

Kuo Zeng,Qing Yang,Yang Zhang,Yanyang Mei,Xianhua Wang,Haiping Yang,Jingai Shao,Jiashuo Li,Hanping Chen
DOI: https://doi.org/10.1016/j.biortech.2018.03.094
IF: 11.4
2018-08-01
Bioresource Technology
Abstract:The study presented an approach to introduce Mg-based additives into cotton stalk for strengthening deoxygenation effect during torrefaction. Then catalytic pyrolysis of torrefied feedstock with Mg-based additives residue as catalyst was performed at 550 °C for 10 min in a fixed-bed reactor. The effects of torrefaction temperature (200, 230, 260, 290, 320, 350 °C), type of Mg-based additive (MgO and MgO-K<sub>2</sub>CO<sub>3</sub>), mass ratio of additive to biomass (0.5, 1 and 2) on pyrolysis were investigated. The results indicated that yields of bio-char and bio-oil significantly increased and decreased with torrefaction temperature rising to 350 °C. MgO inhibited pyrolysis bio-char yield increase with torrefaction severity. MgO-K<sub>2</sub>CO<sub>3</sub> increased H<sub>2</sub> yield a lot from 1.39 to 3.67 mmol/g. It also effectively improved the aromatic hydrocarbons in bio-oil and the reduction of acids. A maximum aromatic hydrocarbons yield of 16.05% was obtained with MgO-K<sub>2</sub>CO<sub>3</sub> (the mass ratio of 0.5:1) at torrefaction temperature of 320 °C.
energy & fuels,biotechnology & applied microbiology,agricultural engineering
What problem does this paper attempt to address?