Understanding the Catalytic Effect on the CO2 Regeneration Performance of Amine Aqueous Solutions

Ke Li,Yuhang Shen,Teng Shen,Zhijun He,Rui Zhou,Zhouxiang Li,Youhong Xiao,Euiseok Hong,Haoran Yang

DOI: https://doi.org/10.3390/pr12091801

IF: 3.5

2024-08-26

Processes

Abstract:To address the high energy consumption of the carbon capture and storage process in the shipping industry, the effects of several commonly used commercial catalysts, such as HZSM-5-25, γ-Al2O3, and SiO2, as well as a self-prepared catalyst, Zr-HZSM-5-25, on the regeneration of MEA solution and MEA + MDEA mixed solution were investigated in this paper. The results showed that Zr-HZSM-5-25 had the best catalytic effect on the regeneration process of the MEA aqueous solution, which could increase the instantaneous maximum CO2 regeneration rate of the MEA-rich solution by about 8.25% and the average regeneration rate by about 5.28%. For the MEA + MDEA mixed solution, the reaction between tertiary amine MDEA and CO2 produced a large amount of HCO3− in the reaction system, which could accelerate the release of CO2 to a large extent, which resulted in the catalytic effect of the Zr-HZSM-5-25 catalyst on the regeneration process of the mixed amine solution being significantly lower than that on the single MEA solution, with an increase of 4.91% in the instantaneous maximum regeneration rate. This instantaneous maximum regeneration rate was only increased by 4.91%. While Zr-HZSM-5-25 showed a better performance in the bench-scale test, it reduced CO2 regeneration energy consumption by 7.3%.

engineering, chemical