Abstract:To solve the deformations and stiffnesses changes of linear rolling guideway under different loads, and to provide reference for the structural design of the carriage, this paper presents an analytical model of three-degrees-of-freedom static stiffness for linear rolling guideway considering the structural deformations of the carriage. In this study, first, the contact loads and elastic deformations between balls and raceways caused by external loads and preload were obtained by Hertz contact theory. The elastic deformations between balls and raceways were described by the change of the curvature centers of the carriage raceways. Next, according to the constraints and loading conditions of the carriage, the elastic beam theory was introduced, and the structural deformations of the carriage under the contact loads were equivalent to the deformations of two cantilever beams. Then, the external loads and the displacements of the carriage were derived by the static equilibrium conditions of the carriage. At last, the proposed equivalent model of carriage structure deformations was validated by comparing the calculated deformations of the carriage with those from a commercial program under various loading conditions, and the accuracy of the static stiffness model proposed in this paper was further verified by the experimental results in the reference. The results show that the calculated structural deformations of carriage matched the deformations calculated by a commercial program well. Also, with relative errors of 4.4–17.5%, the calculated stiffnesses using the model proposed in this paper more closely matched the measured stiffnesses. Clearly, there is a better match between the calculated results of the proposed model and the measurements than with the conventional rigid model.

Analysis of non-uniform load distribution and stiffness for a preloaded roller linear motion guide

Analysis of friction fluctuations mechanism of a preloaded roller linear motion guide based on a new 5-DOF dynamic stiffness model

Stochastic vibration analysis for linear rolling guide with considering geometric errors

Finite element model for static characteristic analysis of rolling linear guide

Investigation of static characteristics for linear rolling guide with considering geometric errors

Effect of combined geometric errors on static load distribution and deformations for linear rolling guide

A new model for the preload degradation of linear rolling guide

Analysis of the Vertical Stiffness of Rolling Guide That Involves the Elastic Deformation of Carriage Skirt

Investigation of non-uniform preload effect on stiffness behavior of angular contact ball bearings:

Stiffness analysis of angular contact ball bearing under non-uniform preload

An analytical model of static stiffness for linear rolling guideway considering the structural deformations of carriage

Dynamic Characteristics of Linear Rolling Guide Joint Based on Contact Stiffness

Research on Static Rolling Angular Stiffness of Linear Motion Ball Guide

Hybrid Modeling and Analysis of Multidirectional Variable Stiffness of the Linear Rolling Guideway under Combined Loads

Analytical Determination and Influence Analysis of Stiffness Matrix of Ball Bearing under Different Load Conditions

Combined Thermal and Wear Analysis of Linear Rolling Guide Subjected to Rigid–Flexible Coupling Motion Stage

An approach for calculating the dynamic load of deep groove ball bearing joints in planar multibody systems

Multi-rollers statics analysis of planetary roller screw mechanism based on explicit expression

Mechanical Properties Analysis of Cylindrical Roller Bearings with Different Profiles under Combined Load

Experiment Analysis of Spindle Performance with Rolling Bearing under Non-Uniform Preload

The Non-Uniform Preloading Effect On Stiffness Behaviour Of Angular Contact Ball Bearings