Abstract:Besides reducing pollution and removing urea from wastewater, electro-oxidation of urea has also offered new prospects for filling the overall water gap for economically producing hydrogen. In this regard, a simple and low-cost electrochemical deposition technique was used to prepare a highly efficient bifunctional electrocatalyst for the HER and the UOR (in place of the OER) on nickel foam (NiFeSP/NF). A three-dimensional and nanoporous NiFeSP/NF electrocatalyst demonstrated relatively high stability and electrocatalytic activity. Notably, the bimetallic and dual-anionic NiFeSP/NF electrode demonstrated good performance for the HER (42, 111 and 138 mV at current densities of −10, −100, and −200 mA cm −2 , respectively), the OER (1.451, 1.502, 1.528, and 1.576 V vs. RHE at 10, 100, 200 and 400 mA cm −2 , respectively), and the UOR (1.304, 1.346, 1.389 and 1.473 V vs. RHE at current densities of 10, 100, 200 and 400 mA cm −2 , respectively). Moreover, the use of a NiFeSP/NF||NiFeSP/NF pair as an anode and a cathode in an overall water-splitting system assisted by urea achieved 1.348 and 1.582 V vs. RHE at 10 and 100 mA cm −2 in 1.0 M KOH with 0.33 M urea solution, which are 163 and 234 mV lower than those achieved in 1.0 M KOH alkaline solution, respectively. Additionally, the NiFeSP/NF||NiFeSP/NF pair demonstrates long-term stability (30 h) in a chronopotentiometry test at 100 mA cm −2 in 1.0 M KOH with 0.33 M urea solution. This bimetallic and dual-anionic NiFeSP electrode exhibits substantial catalytic activity due to the appropriate synergy between Fe and Ni, the modification of the electronic structure enabled by the dual anions, and the enhanced electrocatalytically active surface caused by high porosity. The low cost and single-step manufacturing method of the NiFeSP electrode, high electrocatalytic activity, and stability make it potentially ideal for commercial use in hydrogen generation and treatment of wastewater containing urea.

Achieving low-energy consumption water-to-hydrogen conversion via urea electrolysis over a bifunctional electrode of hierarchical cuprous sulfide@nickel selenide nanoarrays

Electrochemically Induced Cu-NiOOH/Cu2O/Cu Mesh Heteroarchitecture with Cu-Ni Dual Active Sites As Efficient Bifunctional Electrocatalyst for Urea-Assisted Energy-Saving Hydrogen Production in Alkaline Electrolyte

Hierarchical Structure of CuO Nanowires Decorated with Ni(OH)<sub>2</sub> Supported on Cu Foam for Hydrogen Production via Urea Electrocatalysis

Hierarchical Structure of CuO Nanowires Decorated with Ni(OH)2 Supported on Cu Foam for Hydrogen Production via Urea Electrocatalysis

Improved hydrogen generation via a urea-assisted method over 3D hierarchical NiMo-based composite microrod arrays

Co(OH)2 Nanosheets Array Doped by Cu2+ Ions with Optimal Electronic Structure for Urea‐Assisted Electrolytic Hydrogen Generation

Low-Cost Ni2P/Ni0.96S Heterostructured Bifunctional Electrocatalyst toward Highly Efficient Overall Urea-Water Electrolysis

Co-doped MnS/NiS/Ni3S2 in situ grown on hydrophilic nickel foam for energy-efficient urea-assisted alkaline hydrogen production

Ni3S2/MWCNTs/NF Hybrid Nanostructure As Effective Bifunctional Electrocatalysts for Urea Electrolysis Assisted Hydrogen Evolution

Hierarchical Ni3N/Ni0.2Mo0.8N Heterostructure Nanorods Arrays As Efficient Electrocatalysts for Overall Water and Urea Electrolysis

Coaxial Ni-S@N-Doped Carbon Nanofibers Derived Hierarchical Electrodes for Efficient H2 Production Via Urea Electrolysis.

Enhancing hydrogen generation through urea electro-oxidation on a bimetallic and dual-anionic NiFeSP/NF nanostructured electrode

Modulating Local Interfacial Bonding Environment of Heterostructures for Energy‐Saving Hydrogen Production at High Current Densities

Preparation of hollow nanorod Co x Cu 2−x Se/CF electrode assembled from nanoparticles and its urea-assisted hydrogen production performance

Significantly Enhanced Energy-Saving H2 Production Coupled with Urea Oxidation by Low- and Non-Pt Anchored on NiS-Based Conductive Nanofibers

Bifunctional Al-Doped Cobalt Ferrocyanide Nanocube Array for Energy-Saving Hydrogen Production via Urea Electrolysis

Heterogeneous Ni-MoN nanosheet-assembled microspheres for urea-assisted hydrogen production

Urea-oxidation-assisted electrochemical water splitting for hydrogen production on a bifunctional heterostructure transition metal phosphides combining metal–organic frameworks

High-performance Urea Electrolysis Towards Less Energy-Intensive Electrochemical Hydrogen Production Using a Bifunctional Catalyst Electrode

Fe7Se8@Fe2O3 heterostructure nanosheets as bifunctional electrocatalyst for urea electrolysis

Bimetal Schottky Heterojunction Boosting Energy‐Saving Hydrogen Production from Alkaline Water via Urea Electrocatalysis