Erratum to: Adaptive behaviour in children and adolescents with foetal alcohol spectrum disorders: a comparison with specific learning disability and typical development

Å. Fagerlund,I. Autti-Rämö,M. Kalland,P. Santtila,H. Hoyme,S. Mattson,M. Korkman

DOI: https://doi.org/10.1007/s00787-012-0350-1

Abstract:

What problem does this paper attempt to address?

Platinum group elements in atmospheric PM10 particles and dry deposition in France

Mehrazin Omrani,Mathieu Goriaux,Liliane Jean-Soro,Véronique Ruban

DOI: https://doi.org/10.1007/s11356-021-12916-8

IF: 5.8

2021-02-26

Environmental Science and Pollution Research

Abstract:Platinum group elements (PGEs, i.e. platinum, Pt; palladium, Pd; and rhodium, Rh) catalyse over 90% of carbon monoxide, nitrogen oxides and hydrocarbons from combustion residues into water vapour, carbon dioxide and nitrogen in the vehicle’s catalytic converter. But there is a major concern over these metals in the scientific world, since they are emitted by catalytic converters and accumulating in the environment. The distribution of PGEs in PM10 fraction was studied in an open urban site (Nantes, France) and in a tunnel (Paris, France) using low- and high-volume air samplers. PGEs were also investigated in dry deposition particles and deposited dust sampled in the tunnel. Pd occurred at the highest levels in both PM10 and dry deposition samples, followed by Rh and Pt. Maximum concentrations in PM10 fraction were 114 pg m−3 for Pd, 14.3 pg m−3 for Rh and 3.3 pg m−3 for Pt in the urban site (Nantes) and 91 pg m−3 for Pd and 16 pg m−3 for Rh in the tunnel (Paris). The concentrations for dry depositions in the tunnel were 261 μg kg−1 for Pt, 431 μg kg−1 for Pd and 85 μg kg−1 for Rh. The results on PGEs levels in atmospheric particles and dry depositions are the first data of their kind in France and will provide new insights into the contribution of catalytic converters to the environment. We also observed Pd and Rh being 2 times higher PM10 particles compared to dry depositions, leading us to suggest that particles rich in Pd and Rh are smaller than 10 μm. An overall concentration trend of Pd > Rh > Pt was observed in all samples, showing the replacement of Pt by Pd and Rh in newer catalytic converters.

environmental sciences
In vitro investigations of platinum, palladium, and rhodium mobility in urban airborne particulate matter (PM10, PM2.5, and PM1) using simulated lung fluids

Fathi Zereini,Clare L S Wiseman,Wilhelm Püttmann

DOI: https://doi.org/10.1021/es3020887

2012-09-18

Abstract:Environmental concentrations of platinum group elements (PGE) have been increasing since the introduction of automotive catalytic converters to control harmful emissions. Assessments of the human health risks of exposures to these elements, especially through the inhalation of PGE-associated airborne particulate matter (PM), have been hampered by a lack of data on their bioaccessibility. The purpose of this study is to apply in vitro methods using simulated human lung fluids [artificial lysosomal fluid (ALF) and Gamble's solution] to assess the mobility of the PGE, platinum (Pt), palladium (Pd), and rhodium (Rh) in airborne PM of human health concern. Airborne PM samples (PM(10), PM(2.5), and PM(1)) were collected in Frankfurt am Main, Germany. For comparison, the same extraction experiments were conducted using the standard reference material, Used Auto Catalyst (monolith) (NIST 2557). Pt and Pd concentrations were measured using isotope dilution ICP-Q-MS, while Rh was measured directly with ICP-Q-MS (in collision mode with He), following established matrix separation and enrichment procedures, for both solid (filtered residues) and extracted sample phases. The mobilized fractions measured for PGE in PM(10), PM(2.5), and PM(1) were highly variable, which can be attributed to the heterogenic nature of airborne PM and its composition. Overall, the mobility of PGE in airborne PM samples was notable, with a mean of 51% Rh, 22% Pt, and 29% Pd present in PM(1) being mobilized by ALF after 24 h. For PM(1) exposed to Gamble's solution, a mean of 44% Rh, 18% Pt, and 17% Pd was measured in solution after 24 h. The mobility of PGE associated with airborne PM was also determined to be much higher compared to that measured for the auto catalyst standard reference material. The results suggest that PGE emitted from automotive catalytic converters are likely to undergo chemical transformations during and/or after being emitted in the environment. This study highlights the need to conduct bioaccessibility experiments using samples collected in the field to enable an adequate assessment of risk.
Particle size distributions of metal and non-metal elements in an urban near-highway environment

Michael D. Hays,Seung-Hyun Cho,Richard Baldauf,James J. Schauer,Martin Shafer

DOI: https://doi.org/10.1016/j.atmosenv.2010.11.010

IF: 5

2011-02-01

Atmospheric Environment

Abstract:Determination of the size-resolved elemental composition of near-highway particulate matter (PM) is important due to the health and environmental risks it poses. In the current study, twelve 24h PM samples were collected (in July–August 2006) using a low-pressure impactor positioned 20m from a Raleigh, North Carolina interstate. The interstate supported ∼125,000vehicles/d, the majority of which were light-duty gasoline passenger vehicles. The overall near-highway PM mass size distribution was trimodal with a major accumulation mode peak at 500–800nm. PM mass levels reflected daily traffic activity, while mean near-highway PM10 (33±7.5μgm−3), PM2.5 (29±6.8μgm−3), and PM0.1 (1.4±0.3μgm−3) mass levels varied less than 24% over the two week sampling period. The elemental composition of the impactor-collected PM was investigated using magnetic sector inductively coupled plasma-mass spectroscopy (SF-ICPMS). Accumulation mode sulfur (7±4% w/w) was the major inorganic constituent detected at the near-highway site followed by coarse mode group IA and IIA elements likely from re-suspension of crustal matter. As expected, elements regularly detected in asphalt, vehicle, catalyst (e.g., Pt, Rh, and Pd), brake, and tire wear (e.g., Cu and Sb) were also found in the near highway PM. Maximum concentrations of the platinum group, rare earth, and common brake and tire wear elements were observed at d 50 =1–2μm, d 50 =1–4μm, and d 50 ≥1–4μm, respectively. Ten of the eleven metals listed as EPA air toxics (Mn, Cr, Sb, Ni, Pb, As, Co, Cd, Se, and Be) were detected in each PM size fraction but were generally enriched in PM0.1. Several biologically antagonistic suites of metals (Cd, Cu, and V) were found in multiple PM size modes. Some of these metals showed erratic size distributions with daily changes in enrichment (e.g., Ni, Zn, Cd, As, and Cu) and particle size, suggesting a variety of emissions and metal exposure scenarios occurring in the near-highway environment.

environmental sciences,meteorology & atmospheric sciences
Platinum-group elements: quantification in collected exhaust fumes and studies of catalyst surfaces

M A Palacios,M M Gómez,M Moldovan,G Morrison,S Rauch,C Mcleod,R Ma,J Laserna,P Lucena,S Caroli,A Alimonti,F Petrucci,B Bocca,P Schramel,S Lustig,M Zischka,U Wass,B Stenbom,M Luna,J C Saenz,J Santamaría,J M Torrens

DOI: https://doi.org/10.1016/s0048-9697(00)00464-2

2000-07-20

Abstract:Automotive catalytic converters, in which Pt, Pd and Rh (platinum-group elements; PGEs) are the active components for eliminating several noxious components from exhaust fumes, have become the main source of environmental urban pollution by PGEs. This work reports on the catalyst morphology through changes in catalyst surface by scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDX) and laser-induced breakdown spectrometry (LIBS) from fresh to aged catalytic converters. The distribution of these elements in the fresh catalysts analysed (Pt-Pd-Rh gasoline catalyst) is not uniform and occurs mainly in a longitudinal direction. This heterogeneity seems to be greater for Pt and Pd. PGEs released by the catalysts, fresh and aged 30,000 km, were studied in parallel. Whole raw exhaust fumes from four catalysts of three different types were also examined. Two of these were gasoline catalysts (Pt-Pd Rh and Pd-Rh) and the other two were diesel catalysts (Pt). Samples were collected following the 91,441 EUDC driving cycle for light-duty vehicle testing. The results show that at 0 km the samples collected first have the highest content of particulate PGEs and although the general tendency is for the release to decrease with increasing number of samples taken, exceptions are frequent. At 30,000 km the released PGEs in gasoline and diesel catalysts decreased significantly. For fresh gasoline catalysts the mean of the total amount released was approximately 100, 250 and 50 ng km(-1) for Pt, Pd and Rh, respectively. In diesel catalysts the Pt release varied in the range 400-800 ng km-1. After ageing the catalysts up to 30,000 km, the gasoline catalysts released amounts of Pt between 6 and 8 ng km(-1), Pd between 12 and 16 ng km(-1) and Rh between 3 and 12 ng km(-1). In diesel catalysts the Pt release varied in the range 108-150 ng km(-1). The soluble portion of PGEs in the HNO3 collector solution represented less than 5% of the total amount for fresh catalysts. For 30,000 km the total amount of soluble PGEs released was similar or slightly higher than for 0 km.
Temporal variations of PM2.5-bound platinum group elements in outdoor and indoor environments close to areas with traffic congestion

Shengqiong Fang,Chenyu Zhao,Jian Hu,Yanfeng Xing,Qingqing Meng,Xiaoyu Yu,Hao Wang,Pengjie Wang,Rui Zhang,Peng Gao

DOI: https://doi.org/10.1016/j.atmosenv.2020.118109

IF: 5

2021-02-01

Atmospheric Environment

Abstract:Every city in the world faces pollution problems caused by traffic congestion almost every day. Platinum group elements (PGE) have been accumulating in the urban environment as catalytic converters for automobile exhaust emissions control. This study aims to determine the temporal variations of airborne particulate matter (PM)-bound PGE [Platinum (Pt), palladium (Pd) and rhodium (Rh)] in areas close to traffic congestion hotspots. Compared with the morning peak time, the concentrations of Pt, Pd, and Rh in outdoor airborne PM samples (PM2.5) collected in winter during the evening peak time increased by 35.03%, 37.45% and 75.47%, respectively, and the corresponding indoor environment was 9.33%, 6.93% and 71.36%, respectively. Significant temporal variations of PM2.5-bound Pt, Pd, and Rh concentrations were observed during the time period of the Spring Festival. From before to during the Spring Festival, the outdoor environment Pt, Pd, and Rh concentrations sharply decreased by 172.1%, 14.72% and 22.96%, respectively, while the indoor environment decreased by 228.0%, 300.6% and 129.5%, respectively. From a seasonal perspective, among PM2.5 collected from the outdoor environment, PGE concentrations are the highest in winter and the lowest in summer. The temporal variation of the ratios (Pt/Pd, Pt/Rh, and Pd/Rh) indicates that PM2.5-bound Pd concentration increased in the vicinity of traffic congestion. Further, the increased diesel-based trucks with Pt-dominant catalytic converters may contribute to PM2.5-bound Pt detected in the autumn and winter of the alpine area (e.g. Harbin).

environmental sciences,meteorology & atmospheric sciences
Platinum, palladium, and rhodium deposition to the Prunus laurus cerasus leaf surface as an indicator of the vehicular traffic pollution in the city of Varese area: an easy and reliable method to detect PGEs released from automobile catalytic converters

Alessandro Fumagalli,Bruno Faggion,Matteo Ronchini,Giorgio Terzaghi,Marco Lanfranchi,Nicola Chirico,Laura Cherchi

DOI: https://doi.org/10.1007/s11356-009-0166-9

Abstract:Background, aim, and scope: The widespread use of some platinum group elements as catalysts to minimize emission of pollutants from combustion engines produced a constantly growing increase of the concentration of these elements in the environment; their potential toxicological properties explain the increasing interest in routine easy monitoring. We have found that leaves of Prunus laurus cerasus are efficient collectors of particulate with a dimension <60-80 mum, and a simple and reliable procedure was developed to reveal traces of platinum, palladium, and rhodium released from automotive catalysts. The analysis of the dust deposited on the foliage is a direct indicator of traffic pollution. Materials and methods: Leaves of P. laurus cerasus were washed by sonication in a mixture of water and 2-propanol and the washings, to be discarded, were separated by centrifugation to yield typically 0.05-1.2 g of dust that, after mineralization, was directly submitted for atomic absorption analysis. Results: Comparison of the 2007 and 2004-2005 results showed a dramatic reduction of the platinum levels and revealed that palladium is now the main component of this traffic-related pollution. Discussion: The results are consistent with the increasing diffusion of cars with a diesel engine whose catalysts are made up of Pt and/or Pd alone, and gives a significant insight into the recent evolution in catalyst design that replaces platinum for palladium. Conclusions: The proposed analytical procedure is simple, with short preparation times, and greatly reduces matrix effects so that atomic absorption spectroscopy can easily detect the three noble metals at the ng/g level in the dust. Recommendation and perspectives: The results clearly show that Pd concentrations have increased over time, and must be cause for concern.
Predictors of disordered eating in a sample of elite Division I college athletes.

S. Engel,Craig Johnson,P. Powers,R. Crosby,S. Wonderlich,D. Wittrock,James E Mitchell

DOI: https://doi.org/10.1016/S1471-0153(03)00031-X

IF: 2.936

2003-11-01

Eating Behaviors

Abstract:
Molecular diversity - fifth Lake Tahoe symposium.

P. Fernandes

Abstract:This annual conference has been designed to improve communication on chemical and biological molecular diversity research between scientists from industrial and academic sectors. Approximately 150 participants attended, including a mix of physicists, biologists, molecular biologists, chemists, engineers and informaticians. Lake Tahoe, which is surrounded by snow-covered mountains, was a beautiful setting for the conference. Those who enjoy skiing could do so during the afternoon breaks, while others could enjoy walks, visit the local town and take time out for informal scientific discussions.
An assessment of the inhalation bioaccessibility of platinum group elements in road dust using a simulated lung fluid

Clare L S Wiseman,Jianjun Niu,Christine Levesque,Marc Chénier,Pat E Rasmussen

DOI: https://doi.org/10.1016/j.envpol.2018.06.043

Abstract:Metal enrichment of road dust is well characterized but available data on the bioaccessibility of metals in particle size fractions relevant to human respiratory health remain limited. The study goal was to investigate the bioaccessibility of platinum group elements (PGE), which are used as catalysts in automotive exhaust converters, in the inhalable fraction of road dust. Street sweepings were provided by the City of Toronto, Canada, collected as part of its Clean Roads to Clean Air program.The particle size relevance of road dust for inhalation exposures was confirmed using a laser diffraction particle size analyzer (mean Dx(50): 9.42 μm). Total PGE were determined in both bulk and inhalable fractions using nickel sulfide (NiS) fire-assay and instrumental neutron-activation analysis (INAA). PGE lung solubility was examined for the inhalable fraction using Gamble's extraction. Sample digests were co-precipitated with Te-Sn, to pre-concentrate and isolate PGE, prior to their measurement using inductively coupled plasma mass spectrometry (ICP-MS).Total PGE concentrations were enriched in the inhalable fraction of road sweepings. Geomean concentrations in the inhalable fraction were: palladium (Pd) (152 μg/kg), platinum (Pt) (55 μg/kg), rhodium (Rh) (21 μg/kg) and iridium (Ir) (0.23 μg/kg). Osmium (Os) concentrations were below the limit of detection (LOD). Bioaccessible PGEs (n = 16) using Gamble's solution were below LOD for Ir and ruthenium (Ru). For the remainder, the geomean % bioaccessibility was highest for platinum (16%), followed by rhodium (14%) and palladium (3.4%). This study provides evidence that PGE in road dust are bioaccessible in the human lung.
The temporal distribution of platinum group elements (PGEs) in PM2.5

Haofeng Liu,Fangfang Ding,Yuyan Liu,Zucheng Wang,Yaxing Shen,Lan Zhang,Cheng Liu

DOI: https://doi.org/10.1007/s10661-021-09706-7

IF: 3.307

2022-01-06

Environmental Monitoring and Assessment

Abstract:In this paper, Changji, Xinjiang, northwest China, was selected as the study area, and platinum group elements (PGEs) in PM2.5 were quantified by ICP-MS using microwave digestion. The results indicated that the average concentrations (and range) of Rh, Pd, and Pt in PM2.5 were 0.21 (n.d. −1.41) ng/m3, 8.09 (n.d. −59.50) ng/m3, and 0.12 (n.d. −0.83) ng/m3, respectively. The concentration of Pd was significantly higher than Rh and Pt. Moreover, the seasonal variations of Rh and Pd were the same: highest in summer and lower in other seasons. However, the seasonal variation of Pt was opposite to that of Rh and Pd: highest in winter and lower in other seasons. Seasonal differences in emission sources of PGEs and the climatic characteristics of arid regions played important roles in the seasonal changes of PGEs. Rh and Pd had a common source and similar diurnal variation. The major influencing factors were traffic volume and meteorological conditions. The diurnal variation regularity of Pt was different from Rh and Pd. The superimposed effect of vehicle exhaust emissions and coal-fired emissions was the main reason why the diurnal variation of Pt was more complicated than those of Rh and Pd. The diurnal concentration of Pt varied with the seasons. It is caused by seasonal coal combustion and meteorological conditions.

environmental sciences
Improving adherence to sertraline treatment: the effectiveness of a patient education intervention.

M. Bron,John O'neill,I. Fogel

DOI: https://doi.org/10.4088/PCC.V08N0505

2006-10-16

Abstract:BACKGROUND Previous attempts to improve anti-depressant adherence have achieved mixed results. The current study evaluated the effectiveness of a patient education intervention designed to increase adherence to sertraline treatment. METHOD Data from a national pharmacy claims database were used to retrospectively match (along key demographic and clinical variables) consecutive patients prescribed sertraline (N = 1462) who received an educational intervention (Knowing More) between May 1, 2003, and April 30, 2004, with a control group of concurrent sertraline-treated patients who did not receive the intervention (N = 1462). The intervention consisted of 10 newsletters distributed over a 9-month period by mail and e-mail. The intervention and control groups were compared over a 7-month follow-up period on 3 adherence measures: time to discontinuation, days on therapy, and percentage of days on therapy. RESULTS Cox regression analysis revealed that the time to discontinuation of sertraline (median = 100 days) was significantly greater (p < .0001) for the intervention group compared with the control group (median = 60 days). By the end of the follow-up period, 27% of patients remained on therapy with Knowing More versus 15% of those not enrolled in the compliance program. The mean number of days on therapy was 24.8 days (25.5%) longer for the intervention group compared with the control group (122.5 days for the intervention group versus 97.7 days for the control group). The percentage of days on therapy was 88.2% for the intervention group versus 77.7% for the control group among patients with at least 1 refill prescription (p < .001). CONCLUSION The educational compliance intervention, Knowing More, was associated with a significant increase in adherence to antidepressant treatment.
Concentrations of Anthropogenic Pt and Pd in Urban Roadside Soils in Xuzhou, China

Xuesong Wang,Cheng Sun

DOI: https://doi.org/10.1007/s11783-008-0071-3

2008-01-01

Frontiers of Environmental Science & Engineering in China

Abstract:The potential accumulation of platinum group elements (PGE) in the environment from automobile catalysts is high in urban areas, with the major sinks being roadside soils. Therefore, this investigation presented the detailed study on characterized concentrations of Pt and Pd and their enrichment ratios in urban roadside soils in Xuzhou, China in March 2003. Data from 21 roadside topsoil samples analyzed by inductively coupled plasma-mass spectrometer (ICP-MS) illustrated that the medians of concentrations of Pt and Pd were 2.9 and 2.8 ng/g, respectively. Hierarchical clustering analysis indicated that Pt and Pd were mainly from traffic emissions. Compared to unpolluted soils, computation of Pt and Pd enrichment ratios suggested that the Xuzhou roadside soils had average enrichment factors of 3.53 for Pt (in range of 1.22–5.73) and of 3.37 for Pd (in range of 1.35–4.46). Lower Pt/Pd ratios (in range of 0.35–2.86) in relation to similar studies in other countries were observed, which might be due to the different Pt/Pd ratios in Chinese automobile catalytic converters. Moreover, fine fraction (<250 μm) contained higher concentrations of Pt and Pd compared to the coarse fraction (250–500 μmm).
PM₂.₅ Emissions from Light-Duty Gasoline Vehicles in Beijing, China.

Xianbao Shen,Zhiliang Yao,Hong Huo,Kebin He,Yingzhi Zhang,Huan Liu,Yu Ye

DOI: https://doi.org/10.1016/j.scitotenv.2014.04.059

IF: 9.8

2014-01-01

The Science of The Total Environment

Abstract:As stricter standards for diesel vehicles are implemented in China, and the use of diesel trucks is forbidden in urban areas, determining the contribution of light-duty gasoline vehicles (LDGVs) to on-road PM2.5 emissions in cities is important. Additionally, in terms of particle number and size, particulates emitted from LDGVs have a greater health impact than particulates emitted from diesel vehicles. In this work, we measured PM2.5 emissions from 20 LDGVs in Beijing, using an improved combined on-board emission measurement system. We compared these measurements with those reported in previous studies, and estimated the contribution of LDGVs to on-road PM2.5 emissions in Beijing. The results show that the PM2.5 emission factors for LDGVs, complying with European Emission Standards Euro-0 through Euro-4 were: 117.4 ± 142, 24.1 ± 20.4, 4.85 ± 7.86, 0.99 ± 1.32, 0.17 ± 0.15 mg/km, respectively. Our results show a significant decline in emissions with improving vehicle technology. However, this trend is not reflected in recent emission inventory studies. The daytime contributions of LDGVs to PM2.5 emissions on highways, arterials, residential roads, and within urban areas of Beijing were 44%, 62%, 57%, and 57%, respectively. The contribution of LDGVs to PM2.5 emissions varied both for different road types and for different times.
Importance of Automobile Exhaust Catalyst Emissions for the Deposition of Platinum, Palladium, and Rhodium in the Northern Hemisphere

Sebastien Rauch,Harold F. Hemond,Carlo Barbante,Masanori Owari,Gregory M. Morrison,Bernhard Peucker-Ehrenbrink,Urban Wass

DOI: https://doi.org/10.1021/es050784m

2005-09-30

Abstract:An estimated 500 million vehicles worldwide are equipped with an exhaust catalyst that uses platinum group elements (PGE) as the main active components and thus contribute to global PGE emissions. Although PGE emitted from automobile exhaust catalysts were first believed to remain in the roadside environment, we propose here that fine PGE-containing particles in automobile exhaust have resulted in a widespread distribution of emitted PGE. Regional and long-range transport of PGE from automobile exhaust catalysts is supported by elevated PGE deposition in both a peat bog located 250 m from traffic and in central Greenland, respectively. Russian smelters were also found to contribute to PGE contamination in central Greenland. Deposition rates estimated for the roadside environment, the peat bog, and central Greenland were used to provide a first estimate of PGE deposition in the northern hemisphere. The results show that deposition of regionally or long-range transported PGE accounts for a large fraction of total PGE deposition, and PGE deposition in the roadside environment represents less than 5% of the total deposition. Transport at the regional and global scales represents an important component in the environmental cycle of emitted PGE and needs to be further studied to fully assess the environmental fate of PGE from automobile exhaust catalysts.

environmental sciences,engineering, environmental
Platinum and palladium variations through the urban environment: Evidence from 11 sample types from Sheffield, UK

M.T. Jackson,J. Sampson,H.M. Prichard,M JACKSON,J SAMPSON,H PRICHARD

DOI: https://doi.org/10.1016/j.scitotenv.2007.06.004

2007-10-15

Abstract:Platinum (Pt) and Palladium (Pd) concentrations have been analysed in 194 samples from within the city of Sheffield in the UK. The samples were taken from road dust, gully pots (also known as drains), soils, a motorway drainage pipe, rivers, lakes, sewage sludge, incinerator ash, incinerator ash in landfill, street cleansers and gully cleansers. The introduction of Pt- and Pd-bearing automobile catalysts, has been cited as the cause of a rise in the concentration of urban Pt and Pd accumulations. Geochemical analyses for the different sample types are used here to show how the Pt and Pd accumulate in different urban environments as they are transported from their catalytic source. Initially Pt and Pd collect in road dust and gully pots at values of up to 450 ppb although most analyses for both elements are around 100 ppb. The four roadside soils analysed, have a great range in values, the highest with a value of over 600 ppb Pt and 1000 ppb Pd. Then the fate of the Pt and Pd is either to be removed by gully flushers and road sweepers (which contain around half the concentration of that in road dust) or to be washed from the roads, through the gully pots, into either the river or urban drainage systems. Due to the addition of terrestrial sediments, river samples contain much reduced values of Pt and Pd, at approximately an order of magnitude lower than in road dust. Similarly, sewage sludge contains Pt and Pd values which are lower than road dust. However, the Pt and Pd analyses are much higher in incinerated sewage (with many samples over 150 ppb for both metals), probably due to the loss of the mass of other material during the incineration process. Weathered incinerator ash in landfill has lower values of Pt and Pd than fresh ash from the incinerator. Although the range in values of Pt and Pd is similar for road dust and gully pot sediments their modal values tell a different story. The mode for Pt is very similar for both road dust and gully pot sediments, at around 100 ppb, whereas there is a drop of 50 ppb in the mode for Pd in the gully pots (from 80 ppb to around 40 ppb). Given that gully pot sediment is derived from road dust, it is suggested that in gully pots, Pd is preferentially mobilized over Pt. Furthermore, a comparison of the modal values of Pt and Pd in river sediments suggests that this process continues into the natural drainage system of the city.

environmental sciences
Quantifying metal emissions from vehicular traffic using real world emission factors

Jonathan M Wang,Cheol-Heon Jeong,Nathan Hilker,Robert M Healy,Uwayemi Sofowote,Jerzy Debosz,Yushan Su,Anthony Munoz,Greg J Evans

DOI: https://doi.org/10.1016/j.envpol.2020.115805

2021-01-01

Abstract:Road traffic emissions are an increasingly important source of particulate matter in urban and non-road environments, where non-tailpipe emissions can contribute substantially to elevated levels of metals associated with adverse health effects. Thus, better characterization and quantification of traffic-emitted metals is warranted. In this study, real-world emission factors for fine particulate metals were determined from hourly x-ray fluorescence measurements over a three-year period (2015-2018) at an urban roadway and busy highway. Inter-site differences and temporal trends in real-world emission factors for metals were explored. The emission factors at both sites were within the range of past studies, and it was found that Ti, Fe, Cu, and Ba emissions were 2.2-3.0 times higher at the highway site, consistent with the higher proportion of heavy-duty vehicles. Weekday emission factors for some metals were also higher by 2.0-3.5 times relative to Sundays for Mn, Zn, Ca, and Fe, illustrating a dependence on fleet composition and roadway activity. Metal emission factors were also inversely related to relative humidity and precipitation, due to reduced road dust resuspension under wetter conditions. Correlation analysis revealed groups of metals that were co-emitted by different traffic activities and sources. Determining emission factors enabled the isolation of traffic-related metal emissions and also revealed that human exposure to metals in ambient air can vary substantially both temporally and spatially depending on fleet composition and traffic volume.
Advances in Rice Blast Research

D. Tharreau,M. Lebrun,N. Talbot,J. Nottéghem

DOI: https://doi.org/10.1007/978-94-015-9430-1

Abstract:
Identification of Platinum and Palladium Particles Emitted from Vehicles and Dispersed into the Surface Environment

Hazel M. Prichard,Peter C. Fisher

DOI: https://doi.org/10.1021/es203666h

2012-03-07

Abstract:Platinum, palladium, and rhodium are emitted from vehicle catalytic converters. Until now, the form of precious metal particles in road dust and urban waste has not been identified. This study has located, imaged, and analyzed these particles in road dust and gully waste. Two fragments of catalytic converter have been observed in road dust. They are 40-80 μm in size and covered in many minute particles (<0.3 μm) of either platinum with minor rhodium or palladium. One fragment identified in gully sediment is smaller, 25 μm in diameter, hosting only one attached particle of palladium with minor rhodium. As fragments are washed off roads they begin to disintegrate and the precious metals become detached. Also precious metal-bearing particles have been located in incinerated sewage ash including a 20 μm diameter cluster of <3 μm sized platinum particles that may be the remains of a catalytic converter fragment that has survived incineration. The form of these precious metal-bearing particles described here reveals that as they are dispersed from roads they are likely to be present predominantly as two particle sizes. Either they are attached to larger fragments of catalytic converter or they are released as individual detached tiny <0.3 μm to nanoparticle sizes.

environmental sciences,engineering, environmental
Platinum group elements (Pt, Pd, Rh) in airborne particulate matter in rural vs. urban areas of Germany: Concentrations and spatial patterns of distribution

Fathi Zereini,Heiko Alsenz,Clare L.S. Wiseman,Wilhelm Püttmann,Eberhard Reimer,Ruprecht Schleyer,Elke Bieber,Markus Wallasch

DOI: https://doi.org/10.1016/j.scitotenv.2011.11.070

2012-02-01

Abstract:This study examines platinum group element concentrations (PGE) (i.e. platinum (Pt), palladium (Pd) and rhodium (Rh)) and their spatial distribution in airborne particulate matter fractions (PM) of human health concern in urban and rural areas of Germany. Fractionated airborne dust and PM(10), PM(2.5) and PM(1) samples were collected along a busy road in Frankfurt am Main from July 2008 to April 2010. PM(10) was also sampled in Deuselbach and Neuglobsow between January 2008 and July 2009 to examine their concentrations at rural locations and potential for long-range transport. Pt, Pd and Rh were isolated and pre-enriched in samples using a combination of Te and Hg co-precipitation methods. Concentrations were determined using isotope dilution ICP-Q-MS (in collision mode with He). The highest airborne PGE concentrations were measured in PM(10) from Frankfurt (e.g. 12.4pg Pt/m(3) (mean)), while the rural locations of Deuselbach and Neuglobsow exhibited the lowest levels (e.g. 2pg Pt/m(3) (mean)). PGE concentrations were observed to decline with increasingly smaller PM size fractions from PM(10) to PM(1). All size fractions generally contained higher levels of Pd compared to Pt and Rh, an element of greater concern due to its solubility. PM(2.5) collected in Frankfurt had a mean of 16.1pg Pd/m(3), compared to 9.4pg/m(3) for Pt. PGE concentrations also demonstrated a distinct seasonal relationship, with the greatest levels occurring in winter. Compared to a previous study in 2002, PGE concentrations in fractionated airborne dust have significantly increased over time. Elevated PGE levels were also measured for PM(10) sampled in Neuglobsow and Deuselbach, which could not be attributed to local emission sources. Using the diagnostic meteorological model, CALMET, trajectory analyses confirmed our hypothesis that PGE are being transported over longer distances from other areas of Europe.

environmental sciences
Measurement of particulate polycyclic aromatic hydrocarbon emissions from gasoline light-duty passenger vehicles

Xuan Zheng,Shaojun Zhang,Ye Wu,Guangyi Xu,Jingnan Hu,Liqiang He,Xian Wu,Jiming Hao

DOI: https://doi.org/10.1016/j.jclepro.2018.03.078

IF: 11.1

2018-01-01

Journal of Cleaner Production

Abstract:Tackling vehicle emissions is one important task for governmental stakeholders to develop cleaner cities. Gasoline-fueled light-duty passenger vehicles (LDPVs) are intensively used in populous urban areas to meet passenger transportation demand. However, gasoline vehicle emissions raise the health risk due to the proximity of exposure to gasoline exhaust. To better understand the genotoxicity of gasoline emissions, this study is focused on their emissions of particulate polycyclic aromatic hydrocarbons (p-PAHs). We combined dynamometer testing, filter sampling and offline chemical analysis to measure p-PAH emissions from five in-use gasoline LDPVs. The results indicate that the emission factors of tested vehicles under the Worldwide Harmonized Light Vehicles Test Cycle (WLTC) decrease significantly with emission standard, from 11.27 μg km−1 for one China 3 LDPV to below 6 μg km−1 for the other newer LDPVs (China 4 and 5). Different from the mass distribution of p-PAH species for diesel vehicles, medium-and high-molecular-weight PAHs (e.g., 4, 5, and 6-ring species) are considerably identified from the gasoline particle samples. These medium and high-weight PAHs, such as benzo [a]pyrene (BaP) and dibenzo [ah]anthracene (DaA), in general have much greater toxic equivalency factors than low-molecular-weight PAHs. Furthermore, this study also reports that engine type and driving cycle conditions would have discernible impacts on p-PAH emissions. The gasoline direct injection (GDI) engine-equipped LDPVs would increase p-PAH emissions compared with the counterparts using port-fuel injection (PFI) engines. Cold start and transient driving conditions could also result in increased p-PAH emissions, while high-speed driving conditions tend to reduce the p-PAH content in total particles. The significant health impacts caused by p-PAH emissions from gasoline LDPVs should be concerned, and more effective measures should be taken to eliminate gasoline particle emissions.

Erratum to: Adaptive behaviour in children and adolescents with foetal alcohol spectrum disorders: a comparison with specific learning disability and typical development

Platinum group elements in atmospheric PM10 particles and dry deposition in France

In vitro investigations of platinum, palladium, and rhodium mobility in urban airborne particulate matter (PM10, PM2.5, and PM1) using simulated lung fluids

Particle size distributions of metal and non-metal elements in an urban near-highway environment

Platinum-group elements: quantification in collected exhaust fumes and studies of catalyst surfaces

Temporal variations of PM2.5-bound platinum group elements in outdoor and indoor environments close to areas with traffic congestion

Platinum, palladium, and rhodium deposition to the Prunus laurus cerasus leaf surface as an indicator of the vehicular traffic pollution in the city of Varese area: an easy and reliable method to detect PGEs released from automobile catalytic converters

Predictors of disordered eating in a sample of elite Division I college athletes.

Molecular diversity - fifth Lake Tahoe symposium.

An assessment of the inhalation bioaccessibility of platinum group elements in road dust using a simulated lung fluid

The temporal distribution of platinum group elements (PGEs) in PM2.5

Improving adherence to sertraline treatment: the effectiveness of a patient education intervention.

Concentrations of Anthropogenic Pt and Pd in Urban Roadside Soils in Xuzhou, China

PM₂.₅ Emissions from Light-Duty Gasoline Vehicles in Beijing, China.

Importance of Automobile Exhaust Catalyst Emissions for the Deposition of Platinum, Palladium, and Rhodium in the Northern Hemisphere

Platinum and palladium variations through the urban environment: Evidence from 11 sample types from Sheffield, UK

Quantifying metal emissions from vehicular traffic using real world emission factors

Advances in Rice Blast Research

Identification of Platinum and Palladium Particles Emitted from Vehicles and Dispersed into the Surface Environment

Platinum group elements (Pt, Pd, Rh) in airborne particulate matter in rural vs. urban areas of Germany: Concentrations and spatial patterns of distribution

Measurement of particulate polycyclic aromatic hydrocarbon emissions from gasoline light-duty passenger vehicles