Abstract:The poor compatibility between the polymer matrix and complex modification processes greatly affects the excellent tribological properties of graphene in the polymer matrix. In this study, a covalent organic framework (COF)-coated graphene hybrid lubricating filler (G/COFs) was synthesized in situ using a sample one-step mechanochemical synthesis process. This was used to improve the tribological properties of bismaleimide (BMI) resin. The morphology and microstructure of the G/COFs hybrid were characterized, and the effect of the added amount on the tribological properties of the G/COFs/BMI composites was studied. The results showed that the G/COFs hybrid could improve the stability of the friction coefficient and decrease the volume wear rate of BMI composites. Compared to the neat BMI, the 0.6 wt% G/COFs/BMI composites showed optimal tribological performance, with the friction coefficient and volume wear rate decreasing from 0.35 to 0.14 and from 48 × 10−6 to 10.6 × 10−6 mm3/(N‧m), respectively. In addition, the G/COFs/BMI composites showed lower friction coefficient fluctuations and volume wear rates than G/BMI composites. This is mainly attributed to the fact that the deposition of COFs can not only effectively prevent the aggregation of graphene nanosheets, but can also significantly improve the compatibility and interfacial bond between the graphene and BMI matrix. Moreover, the good synergistic effect between the lamellar COFs and graphene nanosheets can generate high-quality self-lubricating transfer films during the friction process. The excellent dispersibility, efficient chemical functionalization, better friction reduction and wear-resistance properties, and facile preparation method make graphene/COFs hybrid nanoparticles promising as an excellent lubricating filler.

Modified montmorillonite synergizes with Co-MOF@PBO fabric to improve the wear resistance of PBO/phenolic resin composites

In-situ Synthesis, Thermal and Mechanical Properties of Biobased Poly(ethylene 2,5-Furandicarboxylate)/montmorillonite (PEF/MMT) Nanocomposites

Preparation of Poly(Phenylene Oxide)/Polyamide-6 Nanocomposites with High Tensile Strength and Excellent Impact Performance

MoS 2 ‐decorated talc hybrid for improving the tribological property of Nomex/ PTFE fabric composites

Synergy of B 4 C @ MoS 2 hybrid for significantly improved mechanical and tribological properties of PI / PTFE fabric composites

Mussel-inspired Polydopamine Functionalized PBO Fibers As an Efficient Additive for UHMWPE Composites with Improved Tribological Performance

Mechanical and tribological properties of polyoxymethylene modified with nanoparticles and solid lubricants

Combined effects of interface modification and micro-filler reinforcements on the thermal and tribological performances of fabric composites

Combined effect of interfacial modification and α-ZrP reinforcement on the tribological properties of PPS fabric/phenolic composites

Halloysite–gold core–shell nanosystem synergistically enhances thermal conductivity and mechanical properties to optimize the wear-resistance of a pheonlic-PBO/PTFE textile composite liner

Ag nanoparticles homogeneously anchored on kaolin synergistically improve the tribological performance of PBO/phenolic resin liner composites

Polyimide-based composite coatings for simultaneously enhanced mechanical and tribological properties by polyhedral oligomeric silsesquioxane

Study of the Tribological Properties of Modified Potassium Titanate Whisker Reinforced Resin-based Friction Composites

Tribological Behaviour of POM Reinforced by Graphene and PTFE

Adopting bio-inspired interfacial modification and reinforcements simultaneously for optimizing the tribological performance of fabric composites

Tribological properties of differently shaped zinc‐based metal‐organic framework particles reinforced epoxy resin composites

Preparation of Polyoxymethylene/Exfoliated Molybdenum Disulfide Nanocomposite through Solid-State Shear Milling

Effects of rod-like attapulgite and lamellar kaolin reinforcement on the tribological behavior of PBO textile-resin composite liner

Enhanced high‐temperature tribological performance of PTFE / PI fabric composites by simultaneously introducing PDA / SiO 2 hybrid coating and aramid product reinforcements

Preparation and Tribological Properties of Bismaleimide Matrix Composites Reinforced with Covalent Organic Framework Coated Graphene Nanosheets

Investigation on the mechanical, thermal and electrical properties of polyoxymethylene composites modified by thermoplastic polyurethane elastomer and carbon fiber