Abstract:The scientific goal of this study was to investigate the effects of various parameters on cavitation-induced erosion, with the aim to enhance the understanding and assessment of cavitation resistance in hydraulic systems. Cavitation erosion poses significant challenges to the durability and efficiency of hydraulic components, such as those found in hydropower plants and pumping stations. Prompted by the need to improve the reliability of cavitation testing and material assessment, this research conducted a comprehensive sensitivity analysis of a cavitation jet apparatus (CJA). This study employed an experimental platform that consisted of a vertical cylindrical test tank, a submerged nozzle, and an aluminum sample. By examining a range of orifice diameters, this research identified that smaller diameters led to increased erosion intensity, with the most pronounced effects observed at a diameter of 2 mm. Furthermore, various standoff distances (SoDs) were tested, which revealed that shorter distances resulted in greater erosion, with the highest impact noted at an SoD of 5 cm. This study also evaluated different nozzle geometries, where it was found that a 132° conical sharped edges nozzle, combined with an orifice diameter of 2 mm and an SoD of 5 cm, produced the most severe erosion. Conversely, chamfered edges nozzles and a commercial nozzle (MEG2510) with an SoD of 10 cm or greater showed reduced erosion. These results highlight that by standardizing the testing duration to 1200 s, the CJA could reliably assess the cavitation resistance of materials. This study established a clear relationship between increased pressure and higher impact forces, which led to more severe erosion. The findings underscore the effectiveness of the CJA in evaluating material resistance under various cavitation conditions, thus addressing a critical need for reliable cavitation testing tools.

Bioinspired snapping-claw apparatus to study hydrodynamic cavitation effects on the corrosion of metallic samples

Accelerated corrosion of low carbon steel by oscillatory acidic streams generated with a bio-inspired claw device

Hydrodynamic cavitation through a bio-inspired fast-closing plunger mechanism: experiments and simulations

Bio-inspired apparatus to produce luminescent cavitation in a rigid walled chamber

Structure, mechanical properties and surface morphology of the snapping shrimp claw

Development of a Cavitation Generator Mimicking Pistol Shrimp

Electrokinetics In Micro-Channeled Cantilevers: Extending The Toolbox For Reversible Colloidal Probes And Afm-Based Nanofluidics

Unveiling the physical mechanism behind pistol shrimp cavitation

AFM in Liquid and On-Spot Study of Metal Corrosion

A Novel Atomic Force Microscope Operating in Liquid for in Situ Investigation of Electrochemical Preparation of Porous Alumina.

Fretting-corrosion Apparatus with Low Magnitude Micro-motion (≤5 μm): Development and Preliminary Outcome

An Erosion-Corrosion Investigation of Coated Steel for Applications in the Oil and Gas Field, Based on Bipolar Electrochemistry

Wettability tuning on stainless steel LIPSS by laser oxidation and its implication on cavitation bubble dynamics

Microscale chemical imaging to characterize and quantify corrosion processes at the metal-electrolyte interface

Research on Claw Motion Characteristics and Cavitation Bubbles of Snapping Shrimp

Research on the Rapid Closing Jet Mechanism of Pistol Shrimp’s Claws Based on Fluid Dynamic Grid

Comparative investigation of ultrasonic cavitation erosion for two engineering materials

Integrated Probe for Electrochemical Analysis of Small Volume Droplets

Experimental Analysis of Cavitation Erosion: Parameter Sensitivity and Testing Protocols

Effect of ultrasonic cavitation micro-jet impact on corrosion of material in ultrasonic assisted electrochemical micromachining

Laser-Guided Corrosion Control: A New Approach to Tailor the Degradation of Mg-Alloys.