A wedding at Maer.

E. Posner

Abstract:

What problem does this paper attempt to address?

Injectable thermosensitive chitosan/gelatin hydrogel for dental pulp stem cells proliferation and differentiation

Mohammad Samiei,Elaheh Dalir Abdollahinia,Nazanin Amiryaghoubi,Marziyeh Fathi,Jaleh Barar,Yadollah Omidi

DOI: https://doi.org/10.34172/bi.2022.23904

Bioimpacts

Abstract:Introduction: Biocompatible and biodegradable scaffolds based on natural polymers such as gelatin and chitosan (CS) provide suitable microenvironments in dental tissue engineering. In the present study, we report on the synthesis of injectable thermosensitive hydrogel (PNIPAAm-g-CS copolymer/gelatin hybrid hydrogel) for osteogenic differentiation of human dental pulp stem cells (hDPSCs). Methods: The CS-g-PNIPAAm was synthesized using the reaction of carboxyl terminated PNIPAAm with CS, which was then mixed with various amounts of gelatin solution in the presence of genipin as a chemical crosslinker to gain a homogenous solution. The chemical composition and microstructures of the fabricated hydrogels were confirmed by FT-IR and SEM analysis, respectively. To evaluate the mechanical properties (e.g., storage and loss modulus of the gels), the rheological analysis was considered. Calcium deposition and ALP activity of DPSCs were carried out using alizarin red staining and ALP test. While the live/dead assay was performed to study its toxicity, the real-time PCR was conducted to investigate the osteogenic differentiation of hDPSCs cultured on prepared hydrogels. Results: The hydrogels with higher gelatin incorporation showed a slightly looser network compared to the other ones. The hydrogel with less gelatin indicates a rather higher value of G', indicating a higher elasticity due to more crosslinking reaction of amine groups of CS via a covalent bond with genipin. All the hydrogels contained viable cells with negligible dead cells, indicating the high biocompatibility of the prepared hydrogels for hDPSCs. The quantitative results of alizarin red staining displayed a significant rise in calcium deposition in hDPSCs cultured on prepared hydrogels after 21 days. Further, hDPSCs cultured on hydrogel with more gelatin displayed the most ALP activity. The expression of late osteogenic genes such as OCN and BMP-2 were respectively 6 and 4 times higher on the hydrogel with more gelatin than the control group after 21 days. Conclusion: The prepared PNIPAAm-g-CS copolymer/gelatin hybrid hydrogel presented great features (e.g., porous structure, suitable rheological behavior, and improved cell viability), and resulted in osteogenic differentiation necessary for dental tissue engineering.
Effect of graphene oxide in an injectable hydrogel on the osteogenic differentiation of mesenchymal stem cells

Yaru Zhu,Tao Wang,Zhen He,Mingchong Liu,Chunfang Zhang,Guixin Sun,Qidong Wang

DOI: https://doi.org/10.1080/09205063.2024.2397211

2024-09-03

Abstract:Graphene oxide (GO) is widely used in bone tissue engineering due to its good biocompatibility and proliferation, and is often used in combination with other hydrogels, which not only reduces the cytotoxicity of GO but also improves the mechanical properties of the hydrogels. We developed injectable carboxymethyl chitosan (CMC)/hydroxyethyl cellulose (HEC)/β-tricalcium phosphate (β-TCP)/GO hydrogel via hydrogen bonding cross-linked between (CMC) and (HEC), also, calcium cross-linked by β-TCP was also involved to further improvement of mechanical properties of the hydrogel, and incorporate different concentration of GO in these hydrogel systems. The characterization of the novel hydrogel was tested by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT-IR). The swelling ratio and mechanical properties were investigated, the results showed that the addition of GO was able to reduce the swelling rate of hydrogels and improve their mechanical properties, with the best effect in the case of 1 mg/mL content. In vivo experimental studies showed that the hydrogel significantly promoted the osteogenic differentiation of rat bone marrow mesenchymal stem cells (rBMSCs), with the best effect at a concentration of 2 mg/mL. The results of the cellular experiments were similar. Therefore, the novel environment-friendly and non-toxic injectable CMC/HEC/β-TCP/GO hydrogel system may have potential applications in bone tissue engineering.
In vitro proliferation and osteogenic differentiation of human dental pulp stem cells in injectable thermo-sensitive chitosan/β-glycerophosphate/hydroxyapatite hydrogel

Yantian Chen,Fengli Zhang,Qiang Fu,Yong Liu,Zejian Wang,Nianmin Qi

DOI: https://doi.org/10.1177/0885328216661566

2016-08-19

Journal of Biomaterials Applications

Abstract:Injectable thermo-sensitive hydrogels have a potential application in bone tissue engineering for their sensitivities and minimal invasive properties. Human dental pulp stem cells have been considered a promising tool for tissue reconstruction. The objective of this study was to investigate the proliferation and osteogenic differentiation of dental pulp stem cells in injectable thermo-sensitive chitosan/β-glycerophosphate/hydroxyapatite hydrogel in vitro. The chitosan /β-glycerophosphate hydrogel and chitosan/β-glycerophosphate/hydroxyapatite hydrogel were prepared using the sol-gel method. The injectability of chitosan /β-glycerophosphate hydrogel and chitosan/β-glycerophosphate/hydroxyapatite hydrogel was measured using a commercial disposable syringe. Scanning electron microscopy was used to observe the inner structure of hydrogels. Then dental pulp stem cells were seeded in chitosan /β-glycerophosphate hydrogel and chitosan/β-glycerophosphate/hydroxyapatite hydrogel, respectively. The growth of dental pulp stem cells was periodically observed under an inverted microscope. The proliferation of dental pulp stem cells was detected by using an Alamar Blue kit, while cell apoptosis was determined by using a Live/Dead Viability/Cytotoxicity kit. The osteogenic differentiations of dental pulp stem cells in chitosan /β-glycerophosphate hydrogel and chitosan/β-glycerophosphate/hydroxyapatite hydrogel were evaluated by alkaline phosphatase activity assay and mRNA expression of osteogenesis gene for 21 days in osteogenic medium. The results indicated that there was no significant difference between chitosan /β-glycerophosphate hydrogel and chitosan/β-glycerophosphate/hydroxyapatite hydrogel in injectability. Cells within the chitosan/β-glycerophosphate/hydroxyapatite hydrogel displayed a typical adherent cell morphology and rapid proliferation with high cellular viability after 14 days of culture. Dental pulp stem cells seeded in chitosan/β-glycerophosphate/hydroxyapatite hydrogels had a higher alkaline phosphatase activity and better up-regulation of gene expression levels of Runx-2, Collagen I, alkaline phosphatase and osteocalcin than in chitosan /β-glycerophosphate hydrogels after osteogenic differentiation. These results demonstrated that the chitosan/β-glycerophosphate/hydroxyapatite hydrogel had excellent cellular compatibility and the superiority in promoting dental pulp stem cells osteogenic differentiation in vitro, showing that the combination of dental pulp stem cells and chitosan/β-glycerophosphate/hydroxyapatite hydrogel has the potential to be used for bone tissue engineering.

engineering, biomedical,materials science, biomaterials
Dual-Crosslinked Oxidized Pectin/N-Succinyl Chitosan Hydrogel Containing Graphene Oxide Nanosheets for Tissue Engineering Application

Atefeh Afroozan Bazghaleh,Mojtaba Akbari Dogolsar,Jalal Barzin

DOI: https://doi.org/10.21203/rs.3.rs-922109/v1

2021-10-01

Abstract:Abstract Biopolymer-based hydrogels are commonly used in clinical applications. In the present study, N- succinyl chitosan (NSC), oxidized pectin (OP), and graphene oxide (GO) were used to develop a new dual-crosslinked hydrogel system. The dynamic OP/NSC/GO hydrogel showed quick gelation and great injectability due to the cooperation of hydrogen interaction between the GO nanosheets and the NSC and OP macromolecules and Schiff-based crosslinking by amino and aldehyde functional groups of polysaccharide derivatives. The performance of the above-mentioned hydrogel was improved when the GOs were embedded. When the GO content was 6 (mg/ml), the hydrogel showed the best overall performance, with a 10-minute healing time, a quick gelation time (~ 13s), acceptable swelling ability, suitable conductivity, great hemocompatibility, and strong biological compatibility. These results showed that the composite hydrogel could be used as a promising conductive injectable self-healing hydrogel for tissue engineering applications.
Preparation of PDA-GO/CS composite scaffold and its effects on the biological properties of human dental pulp stem cells

Yaoyao Li,Xinhui Huang,Weihao Fu,Zonghao Zhang,Kuancheng Xiao,Hongbing Lv

DOI: https://doi.org/10.1186/s12903-023-03849-4

2024-02-01

BMC Oral Health

Abstract:Reduced graphene oxide (rGO) is an graphene oxide (GO) derivative of graphene, which has a large specific surface area and exhibited satisfactory physicochemical characteristics. In this experiment, GO was reduced by PDA to generate PDA-GO complex, and then PDA-GO was combined with Chitosan (CS) to synthesize PDA-GO/CS composite scaffold. PDA-GO was added to CS to improve the degradation rate of CS, and it was hoped that PDA-GO/CS composite scaffolds could be used in bone tissue engineering. Physicochemical and antimicrobial properties of the different composite scaffolds were examined to find the optimal mass fraction. Besides, we examined the scaffold's biocompatibility by Phalloidin staining and Live and Dead fluorescent staining.

dentistry, oral surgery & medicine
Application of injectable silk fibroin/graphene oxide hydrogel combined with bone marrow mesenchymal stem cells in bone tissue engineering

Lu Wang,Rongjian Lu,Jiaxin Hou,Xiaoru Nan,Yijing Xia,Yanqin Guo,Kejing Meng,Changzhen Xu,Xiangyu Wang,Bin Zhao

DOI: https://doi.org/10.1016/j.colsurfa.2020.125318

2020-11-01

Abstract:The stem cell composite hydrogel scaffold was constructed following its application in bone tissue engineering. For this study, different silk fibroin (SF) hydrogels were prepared by enzyme-catalyzed crosslinking of SF and graphene oxide (GO), and their physicochemical properties and biocompatibility were examined. It has been observed that with the incorporation of GO, the pore size of the scaffold became more regular, and the porosity changed negligibly and also exhibited a stable silk II structure with excellent mechanical properties. Moreover, bone marrow stromal cells (BMSCs) were encapsulated in the hydrogel compared to SF hydrogels either in the absence or in the presence of high concentrations of GO. It has been noted that the cells in the compound gel at a low concentration of GO had shown a better growth capability, proliferation and osteogenic differentiation. Therefore, such injectable BMSCs hydrogel is an excellent biomedical material, possessing potential applications in the field of bone tissue engineering.

chemistry, physical
A Novel Zwitterionic Hydrogel Incorporated with Graphene Oxide for Bone Tissue Engineering: Synthesis, Characterization, and Promotion of Osteogenic Differentiation of Bone Mesenchymal Stem Cells

Meng Li,Tianming Cui,Chensong Yang,Guixin Sun,Fangfang Guo,Rui Wu,Mei Fu,Yuqian Zhu,Bingdi Chen,Qidong Wang

DOI: https://doi.org/10.3390/ijms24032691

IF: 5.6

2023-01-31

International Journal of Molecular Sciences

Abstract:Zwitterionic materials are widely applied in the biomedical field due to their excellent antimicrobial, non-cytotoxicity, and antifouling properties but have never been applied in bone tissue engineering. In this study, we synthesized a novel zwitterionic hydrogel incorporated with graphene oxide (GO) using maleic anhydride (MA) as a cross-linking agent by grafted L-cysteine (L-Cys) as the zwitterionic material on maleilated chitosan via click chemistry. The composition and each reaction procedure of the novel zwitterionic hydrogel were characterized via X-ray diffraction (XRD) and Fourier transformed infrared spectroscopy (FT-IR), while the morphology was imaged by scanning electron microscope (SEM). In vitro cell studies, CCK-8 and live/dead assay, alkaline phosphatase activity, W-B, and qRT-CR tests showed zwitterionic hydrogel incorporated with GO remarkably enhanced the osteogenic differentiation of bone mesenchymal stem cells (BMSCs); it is dose-dependent, and 2 mg/mL GO is the optimum concentration. In vivo tests also indicated the same results. Hence, these results suggested the novel zwitterionic hydrogel exhibited porous characteristics similar to natural bone tissue. In conclusion, the zwitterionic scaffold has highly biocompatible and mechanical properties. When GO was incorporated in this zwitterionic scaffold, the zwitterionic scaffold slows down the release rate and reduces the cytotoxicity of GO. Zwitterions and GO synergistically promote the proliferation and osteogenic differentiation of rBMSCs in vivo and in vitro. The optimal concentration is 2 mg/mL GO.

Engineering,Medicine,Materials Science
Improvement of osteogenic properties using a 3D-printed graphene oxide/hyaluronic acid/chitosan composite scaffold

Lai Suo,Zhijun Xue,Puyu Wang,Hongshan Wu,Yao Chen,Jing Shen

DOI: https://doi.org/10.1177/08839115221104072

2022-06-18

Journal of Bioactive and Compatible Polymers

Abstract:Journal of Bioactive and Compatible Polymers, Ahead of Print. Oral and maxillofacial tumors, trauma and infections are the main causes of jaw defects, whose clinical treatment is very complicated. With the development of biological tissue engineering, many biological materials have been widely used in various fields of stomatology, and they play a very important role in the repair and replacement of maxillofacial bone defects. In this study, we intended to prepare a graphene oxide/hyaluronic acid/chitosan (GO/HA/CS) composite hydrogel with different mass ratios of GO: 0.1% (0.1% GO/HA/CS), 0.25% (0.25% GO/HA/CS), 0.5% (0.5% GO/HA/CS), and 1% (1% GO/HA/CS), prepare it into a multilayered and stable composite scaffold through 3D-printing technology, observe the surface morphology of the composite scaffold through scanning electron microscopy (SEM), and then test its physical and chemical properties, mechanical properties, water swelling rate, in vitro degradation and other material properties. Moreover, the biological performance of the GO/HA/CS composite scaffold was studied through experiments, such as cell morphology observation, cell adhesion, cell proliferation, and live-dead cell staining. The results showed that through chemical cross-linking and 3D-printing technology, a porous (pore size: 450–580 μm) and multilayered GO/HA/CS biological scaffold could be successfully constructed, and its surface was an interconnected microporous structure, and the porosity decreased (94%−40%) gradually with the increase of GO. Meanwhile, with the change in GO concentration, some mechanical properties of the scaffold could be improved, such as water swelling rate, degradation rate, and elastic modulus. In addition, the composite scaffold with the appropriate amount of GO had almost no cytotoxicity and could promote cell growth and proliferation, especially 0.25% GO/HA/CS composite scaffold. Consequently, the 0.25% GO/HA/CS composite scaffold had excellent biological material properties and good biocompatibility with osteoblasts, which may provide a new idea for the repair of jaw defects.

biotechnology & applied microbiology,materials science, biomaterials,polymer science
Injectable pH and Thermo-Responsive Hydrogel Scaffold with Enhanced Osteogenic Differentiation of Preosteoblasts for Bone Regeneration

Jasmine L. King,Roopali Shrivastava,Pooja D. Shah,Panita Maturavongsadit,Soumya Rahima Benhabbour

DOI: https://doi.org/10.3390/pharmaceutics15092270

IF: 6.525

2023-09-03

Pharmaceutics

Abstract:Bone fractures are common in the geriatric population and pose a great economic burden worldwide. While traditional methods for repairing bone defects have primarily been autografts, there are several drawbacks limiting its use. Bone graft substitutes have been used as alternative strategies to improve bone healing. However, there remain several impediments to achieving the desired healing outcomes. Injectable hydrogels have become attractive scaffold materials for bone regeneration, given their high performance in filling irregularly sized bone defects and their ability to encapsulate cells and bioactive molecules and mimic the native ECM of bone. We investigated the use of an injectable chitosan-based hydrogel scaffold to promote the differentiation of preosteoblasts in vitro. The hydrogels were characterized by evaluating cell homogeneity, cell viability, rheological and mechanical properties, and differentiation ability of preosteoblasts in hydrogel scaffolds. Cell-laden hydrogel scaffolds exhibited shear thinning behavior and the ability to maintain shape fidelity after injection. The CNC-CS hydrogels exhibited higher mechanical strength and significantly upregulated the osteogenic activity and differentiation of preosteoblasts, as shown by ALP activity assays and histological analysis of hydrogel scaffolds. These results suggest that this injectable hydrogel is suitable for cell survival, can promote osteogenic differentiation of preosteoblasts, and structurally support new bone growth.

pharmacology & pharmacy
A new prescription.

J. Gray

DOI: https://doi.org/10.7748/NS.20.10.1.S1

2005-11-16

Nursing Standard

Abstract:How disappointing that doctors' representatives came out against full prescribing rights for nurses and pharmacists. Last week's historic announcement prompted negative comments from the British Medical Association's GPs and consultants, whose spokespeople believe only doctors have the necessary training and diagnostic skills to justify prescribing the full range of medicines.
Injectable Double-Network Hydrogel-Based Three-Dimensional Cell Culture Systems for Regenerating Dental Pulp.

Bing Han,Chunling Cao,Aijing Wang,Yanran Zhao,Moran Jin,Yuhan Wang,Shuqin Chen,Min Yu,Zhenzhong Yang,Xiaozhong Qu,Xiaoyan Wang

DOI: https://doi.org/10.1021/acsami.2c20848

IF: 9.5

2023-01-01

ACS Applied Materials & Interfaces

Abstract:The regeneration of dental pulp tissue is very important, but difficult, in dentistry. The biocompatibility, water content, and viscoelastic properties of pulp-like tissue must be optimized to achieve the efficient transfer of metabolites and nutrients, a suitable degradation rate, distribution of encapsulated cells, injectability, and gelation in situ under physiological conditions. As promising materials for pulp regeneration, hydrogel scaffolds have been produced to simulate the extracellular matrix and transmit signaling molecules. It is imperative to develop hydrogels to effectively regenerate pulp tissue for clinical application. Here, two injectable double-network (DN) hydrogel-based three-dimensional (3D) cell culture systems were developed for regenerating dental pulp. The microstructure, mechanical property, rheology property, and degradation behavior of the injectable DN glycol chitosan-based hydrogels in a simulated root canal model were characterized and compared to a single-network (SN) glycol chitosan-based hydrogel. Human dental pulp stem cells (hDPSCs) were then encapsulated into the GC-based hydrogels for the regeneration of pulp tissue, and the biological performance was investigated both in vitro and in vivo. The results showed that the DN hydrogels had ideal injectability under physiological conditions due to the dynamic nature of the crosslinks. Besides, the DN hydrogels exhibited better mechanical properties and longer degradation duration than the corresponding SN hydrogel. As a 3D cell culture system, the characteristics of the DN hydrogel facilitated odontogenic differentiation and mineralization of hDPSCs in vitro. Further in vivo analysis confirmed that the chemical composition, matrix stiffness, and degradation rate of the DN hydrogel matched those of pulp-like fibrous connective tissue, which might be related to Smad3 activation. These findings demonstrate that DN glycol chitosan-based hydrogels are suitable for the regeneration of pulp tissue.
Induction of osteogenic differentiation in a rat calvarial bone defect model using an In situ forming graphene oxide incorporated glycol chitosan/oxidized hyaluronic acid injectable hydrogel

Sang Jin Lee,Haram Nah,Dong Nyoung Heo,Kyoung-Hwa Kim,Ji Min Seok,Min Heo,Ho-Jin Moon,Donghyun Lee,Jae Seo Lee,Seong Yeong An,Yu-Shik Hwang,Wan-Kyu Ko,Seong Jun Kim,Seil Sohn,Su A Park,Shin-Young Park,Il Keun Kwon

DOI: https://doi.org/10.1016/j.carbon.2020.05.022

IF: 10.9

2020-10-01

Carbon

Abstract:Graphene oxide (GO) incorporated hydrogels have received great attention and have shown excellent potential for use in the field of bone tissue engineering due to their unique osteogenic functionalities. However, current hydrogel systems are limited in their ability to provide an appropriate amount of GO to the lesion area. To overcome this issue, we designed a GO incorporated glycol chitosan (gC)-hyaluronic acid (HA) injectable hydrogel system via a simple oxidation technique. Through oxidation, aldehyde groups were introduced onto the HA. Blending this with gC allowed for the formation of an aqueous hydrogel matrix. Physico-chemical characterization demonstrated that the gC/oHA/GO hydrogel matrix exhibited robust mechanical properties and stability. The in vitro and in vivo results showed that GO incorporated injectable hydrogels enhanced bone tissue regeneration as compared to control injectable hydrogels. Therefore, our results indicate that our injectable hydrogel system could be used for delivering GO. This material may serve as an excellent tissue scaffold for use in treating bone defects.

materials science, multidisciplinary,chemistry, physical
Injectable polysaccharide hydrogel embedded with hydroxyapatite and calcium carbonate for drug delivery and bone tissue engineering

Bowen Ren,Xueyun Chen,Shoukang Du,Ye Ma,Huinan Chen,Guoliang Yuan,Jianliang Li,Dangsheng Xiong,Huaping Tan,Zhonghua Ling,Yong Chen,Xiaohong Hu,Xiaohong Niu

DOI: https://doi.org/10.1016/j.ijbiomac.2018.06.200

2018-10-15

Abstract:To meet the progressive requirements for bone regeneration purpose, injectable hydrogels have attracted increasing attention in tissue regeneration and local drug delivery applications. In this study, we report a facile method to prepare injectable and degradable polysaccharide-based hydrogels doubly integrated with hydroxyapatite (HAp) nanoparticles and calcium carbonate microspheres (CMs) under physiological condition. The mechanism of cross-linking is attributed to the Schiff-base reaction between amino and aldehyde groups of carboxymethyl chitosan (CMCS) and oxidized alginate (OAlg), respectively. Synchronously, tetracycline hydrochloride (TH) loaded CMs were fabricated by the precipitation reaction with an average diameter of 6.62 μm. To enhance bioactive and mechanical properties, nano-HAp and CMs containing TH were encapsulated into the polysaccharide-based hydrogel to form injectable gel scaffolds for imitation of bone niche. The gelation time, morphology, mechanical properties, swelling ratio and in vitro degradation of the gel scaffolds could be controlled by varying HAp and CMs contents. Moreover, the composite gel scaffolds had good sustained drug release and antibacterial properties, as confirmed by drugs release calculation and antibacterial evaluation. In addition, the gel scaffolds were found to be self-healing due to dynamic equilibrium of the Schiff-base linkages. These results suggested that the prepared composite gel scaffolds hold great potential for drug delivery and regeneration of irregular bone defects.
A program for the computer evaluation of conventional electrocardiograms.

S. Klusmeier,C. Zywietz,H. Abel

Abstract:
Effect of graphene oxide/ poly-L-lactic acid composite scaffold on the biological properties of human dental pulp stem cells

Zailing Qiu,Xuemei Lin,Luning Zou,Weihao Fu,Hongbing Lv

DOI: https://doi.org/10.1186/s12903-024-04197-7

2024-04-05

BMC Oral Health

Abstract:Tissue engineering has attracted recent attention as a promising bone repair and reconstruction approach. Dental pulp stem cells (DPSCs) are pluripotent and can differentiate into bone cells with the correct environment and substrate. Therefore, suitable scaffold materials are essential for fabricating functional three-dimensional (3D) tissue and tissue regeneration. Composite scaffolds consisting of biodegradable polymers are very promising constructs. This study aims to verify the biological function of human DPSCs seeded onto composite scaffolds based on graphene oxide (GO) and poly-L-lactic acid (PLLA).

dentistry, oral surgery & medicine
A novel injectable hydrogel containing polyetheretherketone for bone regeneration in the craniofacial region

Mahdieh Alipour,Marjan Ghorbani,Masume Johari khatoonabad,Marziyeh Aghazadeh

DOI: https://doi.org/10.1038/s41598-022-23708-6

IF: 4.6

2023-01-18

Scientific Reports

Abstract:Polyetheretherketone (PEEK) is an organic material introduced as an alternative for titanium implants. Injectable hydrogels are the most promising approach for bone regeneration in the oral cavity to fill the defects with irregular shapes and contours conservatively. In the current study, injectable Aldehyde-cellulose nanocrystalline/silk fibroin (ADCNCs/SF) hydrogels containing PEEK were synthesized, and their bone regeneration capacity was evaluated. Structure, intermolecular interaction, and the reaction between the components were assessed in hydrogel structure. The cytocompatibility of the fabricated scaffolds was evaluated on human dental pulp stem cells (hDPSCs). Moreover, the osteoinduction capacity of ADCNCs/SF/PEEK hydrogels on hDPSCs was evaluated using Real-time PCR, Western blot, Alizarin red staining and ALP activity. Bone formation in critical-size defects in rats' cranial was assessed histologically and radiographically. The results confirmed the successful fabrication of the hydrogel and its osteogenic induction ability on hDPSCs. Furthermore, in in vivo phase, bone formation was significantly higher in ADCNCs/SF/PEEK group. Hence, the enhanced bone regeneration in response to PEEK-loaded hydrogels suggested its potential for regenerating bone loss in the craniofacial region, explicitly surrounding the dental implants.

multidisciplinary sciences
Chitosan/Xanthan/Hydroxyapatite-graphene oxide porous scaffold associated with mesenchymal stem cells for dentin-pulp complex regeneration

Alana Pc Souza,José G Neves,Daniel Navarro da Rocha,Camila C Lopes,Ângela M Moraes,Lourenço Correr-Sobrinho,Américo Bortolazzo Correr

DOI: https://doi.org/10.1177/08853282231155570

Abstract:The aim of this paper was to synthesize and characterize polymeric scaffolds of Chitosan/Xanthan/Hydroxyapatite-Graphene Oxide nanocomposite associated with mesenchymal stem cells for regenerative dentistry application. The chitosan-xanthan gum (CX) complex was associated with Hydroxyapatite-Graphene Oxide (HA-GO) nanocomposite with different Graphene Oxides (GO) concentration (0.5 wt%; 1.0 wt%; 1.5 wt%). The scaffolds characterizations were performed by X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), Raman spectroscopy, thermogravimetric analysis (TGA), scanning electron microscopy (SEM) and contact angle. The mechanical properties were assessed by compressive strength. The in vitro bioactivity and the in vitro cytotoxicity test (MTT test) were analyzed as well. The data was submitted to the Normality and Homogeneity tests. In vitro Indirect Cytotoxicity assay data was statistically analyzed by ANOVA two-way, followed by Tukey's test (α = 0.05). Compressive strength and contact angle data were statistically analyzed by one-way ANOVA, followed by Tukey's test (α = 0.05). XRD showed the presence of Hydroxyapatite (HA) peaks in the structures CXHA, CXHAGO 0.5%,1.0% and 1.5%. FT-IR showed amino and carboxylic bands characteristic of CX. Raman spectroscopy analysis evidenced a high quality of the GO. In the TGA it was observed the mass loss associated with the CX degradation by depolymerization. SEM analysis showed pores in the scaffolds, in addition to HA incorporated and adhered to the polymer. Contact angle test showed that scaffolds have a hydrophilic characteristic, with the CX group the highest contact angle and CXHA the lowest (p < 0.05). 1.0 wt% GO significantly increased the compressive strength compared to other compositions. In the bioactivity test, the apatite crystals precipitation on the scaffold surface was observed. MTT test showed high cell viability in CXHAGO 1.0% and CXHAGO 1.5% scaffold. CXHAGO scaffolds are promising for regenerative dentistry application because they have morphological characteristics, mechanical and biological properties favorable for the regeneration process.
The rhombotin gene family encode related LIM-domain proteins whose differing expression suggests multiple roles in mouse development.

L. Foroni,T. Boehm,Les White,A. Forster,P. Sherrington,X. Liao,C. Brannan,N. Jenkins,N. Copeland,T. Rabbitts

DOI: https://doi.org/10.1016/0022-2836(92)90630-3

IF: 6.151

1992-08-05

Journal of Molecular Biology

Abstract:
Additive manufacturing of graphene oxide/hydroxyapatite bioceramic scaffolds with reinforced osteoinductivity based on digital light processing technology

Hongyu Zhao,Hongyu Xing,Qingguo Lai,Yixuan Zhao,Qinghua Chen,Bin Zou

DOI: https://doi.org/10.1016/j.matdes.2022.111231

2022-10-10

Abstract:In the field of bone tissue engineering, porous hydroxyapatite (HA) bone repair scaffolds with controlled architecture and porosity are challenging to manufacture and lack sufficient osteoinductive activity, which limit its wider clinical application. This study fabricated porous graphene oxide (GO)/HA composite ceramic scaffolds using digital light processing (DLP) technology. The properties of the composite ceramic slurry and the process parameters of curing, degreasing, and sintering were initially examined to ensure molding accuracy. The research showed that a small amount of GO (0.1–0.4 wt%) could better maintain the pore structure and improve the mechanical properties of composite ceramics. Porous scaffolds with pore sizes of 300–400 μm were prepared for co-culture with rat bone marrow mesenchymal stem cells to detect biocompatibility. The results showed that all scaffolds have no cytotoxicity. Compared with HA, the GO/HA ceramic scaffold significantly promoted the cell adhesion, proliferation, and expression of osteogenesis-related genes; GO (0.1–0.2 wt%) /HA scaffolds exhibited superior alkaline phosphatase activity and more effective bone mineralization, showing enhanced osteoinductivity. The porous GO/HA composite scaffold fabricated by DLP presented a strong potential for repairing bone defects.

materials science, multidisciplinary
Graphene oxide-functionalized nanocomposites promote osteogenesis of human mesenchymal stem cells via enhancement of BMP-SMAD1/5 signaling pathway

Zhong Li,Shiqi Xiang,Zixuan Lin,Eileen N Li,Haruyo Yagi,Guorui Cao,Lauren Yocum,La Li,Tingjun Hao,Katherine K Bruce,Madalyn R Fritch,Huanlong Hu,Bing Wang,Peter G Alexander,Khiam Aik Khor,Rocky S Tuan,Hang Lin,Eileen N. Li,Katherine K. Bruce,Madalyn R. Fritch,Peter G. Alexander,Rocky S. Tuan

DOI: https://doi.org/10.1016/j.biomaterials.2021.121082

IF: 14

2021-10-01

Biomaterials

Abstract:Biomaterials that can harness the intrinsic osteogenic potential of stem cells offer a promising strategy to accelerate bone regeneration and repair. Previously, we had used methacrylated gelatin (GelMA)-based scaffolds to achieve bone formation from human mesenchymal stem cells (hMSCs). In this study, we aimed to further enhance hMSC osteogenesis by incorporating graphene oxide (GO)-based nanosheets into GelMA. In vitro results showed high viability and metabolic activities in hMSCs encapsulated in the newly developed nanocomposite. Incorporation of GO markedly increased mineralization within hMSC-laden constructs, which was further increased by replacing GO with silica-coated graphene oxide (SiGO). Mechanistic analysis revealed that the nanosheet enhanced the production, retention, and biological activity of endogenous bone morphogenetic proteins (BMPs), resulting in robust osteogenesis in the absence of exogenous osteoinductive growth factors. Specifically, the osteoinductive effect of the nanosheets was abolished by inhibiting the BMP signaling pathway with LDN-193189 treatment. The bone formation potential of the technology was further tested in vivo using a mouse subcutaneous implantation model, where hMSCs-laden GO/GelMA and SiGO/GelMA samples resulted in bone volumes 108 and 385 times larger, respectively, than the GelMA control group. Taken together, these results demonstrate the biological activity and mechanism of action of GO-based nanosheets in augmenting the osteogenic capability of hMSCs, and highlights the potential of leveraging nanomaterials such as GO and SiGO for bone tissue engineering applications.This study demonstrates the mechanism of action of graphene oxide nanosheets in augmenting bone regeneration.

engineering, biomedical,materials science, biomaterials

A wedding at Maer.

Injectable thermosensitive chitosan/gelatin hydrogel for dental pulp stem cells proliferation and differentiation

Effect of graphene oxide in an injectable hydrogel on the osteogenic differentiation of mesenchymal stem cells

In vitro proliferation and osteogenic differentiation of human dental pulp stem cells in injectable thermo-sensitive chitosan/β-glycerophosphate/hydroxyapatite hydrogel

Dual-Crosslinked Oxidized Pectin/N-Succinyl Chitosan Hydrogel Containing Graphene Oxide Nanosheets for Tissue Engineering Application

Preparation of PDA-GO/CS composite scaffold and its effects on the biological properties of human dental pulp stem cells

Application of injectable silk fibroin/graphene oxide hydrogel combined with bone marrow mesenchymal stem cells in bone tissue engineering

A Novel Zwitterionic Hydrogel Incorporated with Graphene Oxide for Bone Tissue Engineering: Synthesis, Characterization, and Promotion of Osteogenic Differentiation of Bone Mesenchymal Stem Cells

Improvement of osteogenic properties using a 3D-printed graphene oxide/hyaluronic acid/chitosan composite scaffold

Injectable pH and Thermo-Responsive Hydrogel Scaffold with Enhanced Osteogenic Differentiation of Preosteoblasts for Bone Regeneration

A new prescription.

Injectable Double-Network Hydrogel-Based Three-Dimensional Cell Culture Systems for Regenerating Dental Pulp.

Induction of osteogenic differentiation in a rat calvarial bone defect model using an In situ forming graphene oxide incorporated glycol chitosan/oxidized hyaluronic acid injectable hydrogel

Injectable polysaccharide hydrogel embedded with hydroxyapatite and calcium carbonate for drug delivery and bone tissue engineering

A program for the computer evaluation of conventional electrocardiograms.

Effect of graphene oxide/ poly-L-lactic acid composite scaffold on the biological properties of human dental pulp stem cells

A novel injectable hydrogel containing polyetheretherketone for bone regeneration in the craniofacial region

Chitosan/Xanthan/Hydroxyapatite-graphene oxide porous scaffold associated with mesenchymal stem cells for dentin-pulp complex regeneration

The rhombotin gene family encode related LIM-domain proteins whose differing expression suggests multiple roles in mouse development.

Additive manufacturing of graphene oxide/hydroxyapatite bioceramic scaffolds with reinforced osteoinductivity based on digital light processing technology

Graphene oxide-functionalized nanocomposites promote osteogenesis of human mesenchymal stem cells via enhancement of BMP-SMAD1/5 signaling pathway