Abstract:Dynamic surface wetting of particles in contact with droplet is a complex phenomenon ubiquitously encountered in many multiphase systems of industrial importance. In this study, we address this aspect by investigating impact behavior of a water droplet (diameter = 2.9 ± 0.1 mm) in the Weber number (We) range from ~4 to 104 on a stationary spherical brass particle (diameter = 10 mm) with and without heat transfer using a combination of high speed imaging and computational fluid dynamics (CFD) modeling approach. In cold state interactions (20°C), droplet exhibited oscillatory interfacial motion comprising periodic spreading and recoiling motion. Interactions involving heat transfer were studied in film boiling regime (350°C) and two outcomes were noted-droplet rebound and disintegration. A coupled Level Set and Volume of Fluid (VOF) approach based multiphase CFD model was utilized to predict the dynamic spread ratio and transient evolution of droplet shape during the interaction. To capture the complex contact line motion realistically, a continuous time varying profile of experimentally measured dynamic contact angles was used as a wall boundary condition for the cold interactions which provided good agreement with experimentally measured droplet spread ratio. In film boiling regime, droplet spread ratio was correlated to impact Weber number and a power law trend was obtained. Rebound and disintegration outcomes were characterized by the droplet-particle contact time. For simulating interactions in film boiling regime, a constant contact angle in the limit of super-hydrophobic surface was implemented in the CFD model to account for the apparent non-wetting effect due to vapor film formation at the contact area. A sensitivity analysis was performed involving three different contact angle boundary conditions (θ s = 150, 160, and 170°) to represent the surface hydrophobicity. CFD model predicted interaction outcomes and droplet spread ratios were in reasonable agreement with the experiment at different impact Weber numbers. Increase in spherical surface heat flux and corresponding rise in droplet temperature at different impact Weber numbers were also quantified which showed an increasing trend up to a critical Weber number for droplet disintegration.

Numerical Study of Bacteria Containing Droplets Aerosolized From Hot Surfaces

Bacteria-surface interactions: Role of impacting bacteria-laden droplets

Droplet Impingement and Vapor Layer Formation on Hot Hydrophobic Surfaces

Evaporation of bacteria-laden surrogate respiratory fluid droplets: On a hydrophilic substrate versus contact-free environment confers differential bacterial infectivity

Experimental Study of Heat Transfer from Droplet Impact on A Heated Surface

Dynamic Surface Wetting and Heat Transfer in a Droplet-Particle System of Less Than Unity Size Ratio

Residence Time and Heat Transfer when Water Droplets Hit A Scalding Surface

Inactivation Mechanisms of Escherichia coli in Simulants of Respiratory and Environmental Aerosol Droplets

Analytical Consideration of Liquid Droplet Impingement on Solid Surfaces

Droplet boiling on heated surfaces with various wettabilities

Experimental And Numerical Studies Of Interaction Between Liquid Droplets And Hot Surfaces Under Different Conditions

Droplet evaporation residue indicating SARS-COV-2 survivability on surfaces

Heat Transfer to Bouncing Droplets on Superhydrophobic Surfaces

Evaporation And Nucleate Boiling Of An Individual Droplet On Surfaces

Experimental Study of a Micrometer-Sized Droplet Impinging on a Smooth Heated Surface

Evaporation and pathogenesis of levitated bacteria-laden surrogate respiratory fluid droplets: At different relative humidity and evaporation stages

Evaporating microfluidic droplets: A tool to study pathogen viability in bioaerosols

The Impingement Of Droplet Train Onto A Flat Hot Surface With High Wall Superheat

Infectiousness model of expelled droplets exposed to ultraviolet germicidal irradiation coupled with evaporation

Numerical study on heat and mass transfer of droplet collision on superheated bio-inspired surfaces