Nanometer-sized fluorous fullerene vesicles in water and on solid surfaces.

T. Homma,Koji Harano,H. Isobe,E. Nakamura

DOI: https://doi.org/10.1002/anie.200904659

2010-02-22

Angewandte Chemie

Abstract:

What problem does this paper attempt to address?

A novel ammonium zinc molybdate layered double hydroxide nanoflakes/vapor grown carbon fibers nanomaterials based electrocatalyst for the monitoring of dimetridazole drug in real samples

Chelladurai Karuppiah,Sivakumar Musuvadhi Babulal,Tse-Wei Chen,Shen-Ming Chen,Li-Fan Hsu,Dunia A. Al Farraj,Sayee Kannan Ramaraj,Mohamed S. Elshikh,Chun-Chen Yang

DOI: https://doi.org/10.1016/j.jece.2022.108227

IF: 7.7

2022-10-01

Journal of Environmental Chemical Engineering

Abstract:Antibiotics are mainly used to treat infectious diseases caused by bacteria in human and animal bodies. Dimetridazole (DMZ) is a nitroimidazole class of antibiotic drug which is commonly used as an additive in poultry feed. The overuse of antibiotics in poultry production can transfer resistant bacteria to living organisms that cause serious side effects. Therefore, we have developed a two-dimensional (2D)/one-dimensional (1D) hybrid electrocatalyst to detect DMZ protozoan infections drug in food samples. A 2D nanoflakes-like structure of hydrogen ammonium zinc molybdate layered double hydroxides (denoted as AZnMo-LDHs), is a new class of 2D material, that was initially derived through the co-precipitation method; later, it was integrated with 1D vapor grown carbon fiber (VGCF) under ultrasonication method. This hybrid material is further characterized by different spectroscopic and microscopic techniques. Its electrocatalytic activity to DMZ was also examined by cyclic and differential pulse voltammetry methods. The AZnMo-LDHs@VGCF electrocatalyst exhibited an excellent electrochemical detection parameter such as a lower limit of detection (0.021 μM), sensitivity (1 μA μM−1 cm−2), and good linear range (0.25–570 μM) toward DMZ. It is due to the synergistic effect between the 2D nanoflakes of the LDHs and 1D VGCF conductive support. The proposed sensor further exhibited a good recovery to the determination of DMZ in real spiked samples such as egg, milk, and human urine.

engineering, chemical, environmental
Dual biomass-derived porous carbon heterogeneous functionalized mesoporous CuCo2O4 nanocomposite combined with molecularly imprinted polymers as an electrochemical sensing platform for hypersensitive and selective determination of dimetridazole contaminants

Bo Zhang,Xiaoran Li,Zifu Wang,Huimin Ren,Jianhui Wang,Qijie Chen,Yongjian Cai,Ke Quan,Miao Liu,Mingfei Pan,Guozhen Fang

DOI: https://doi.org/10.1016/j.talanta.2024.126395

IF: 6.1

2024-09-01

Talanta

Abstract:In this study, an original molecularly imprinted electrochemical sensor (MIECS) is prepared using layer-by-layer modification of sensitization nanomaterials (CuCo2O4/BPC-E) coupled with molecularly imprinted polymers (MIPs) for the ultrasensitive and rapid determination of dimetridazole (DMZ) contaminants. The biomass waste of eggshell (ES) powders subtly introduced in situ in the carbonization process of psyllium husk (PSH) substantially promotes the physicochemical properties of the resulting biomass-derived porous carbon (BPC-E). The large specific surface area and abundant pores provide a favourable surface for loading mesoporous CuCo2O4 with a spinel structure. The assembly of CuCo2O4/BPC-E on the gold electrode (GE) surface enhances the electrochemical sensing signal. The MIPs constructed using DMZ and o-phenylenediamine (oPD) as templates and functional monomers boost the targeted recognition performance of the analyte. The combined DMZ targets then undergo an electrochemical reduction reaction in situ with the transfer of four electrons and four protons. Under optimum conditions, the current response of differential pulse voltammetry (DPV) exhibits two linear ranges for DMZ detection, 0.01-10 μM and 10-200 μM. The limit of detection (LOD) is 1.8 nM (S/N = 3) with a sensitivity of 5.724 μA μM-1 cm-2. The obtained MIECS exhibits excellent selectivity, reproducibility, repeatability and stability. This electrochemical sensing system is applied to the detection of real samples (tap water, coarse fodder and swine urine), yielding satisfactory recoveries (90.6%-98.1 %), which are consistent with those obtained via HPLC. This finding verifies that the utility of MIECS for monitoring pharmaceutical and environmental contaminants and ensuring food safety.
A piece of my mind. Death and life in Iraq.

Z. Stockinger

Abstract:
3D architectured zinc–chromium layered double hydroxide with nickel cobalt sulfide composite for the electrochemical detection of ronidazole

Thangavelu Sakthi Priya,Tse-Wei Chen,Shen-Ming Chen,Thangavelu Kokulnathan,Bih-Show Lou,Riaz Ullah,Wedad A. Al-onazi,Mohamed S. Elshikh

DOI: https://doi.org/10.1039/d3en00804e

2024-04-10

Environmental Science Nano

Abstract:Currently, the elevated usage of antibiotics in the health sector has led to genetic modification, antibiotic resistance, and other adverse effects on ecosystems. Ronidazole (RZ) is a multifunctional veterinary drug that can cause severe health and environmental problems. Hence, it is essential to monitor this drug in environmental and biological samples with high accuracy. Analogously, we fabricated a zinc–chromium-layered double hydroxide with a nickel cobalt sulfide (ZC/NCS) catalyst for the electrochemical sensing of RZ. Its structural and morphological properties were deeply examined with several spectroscopic techniques. The electrochemical properties were investigated using impedance and voltammetric methods. The electroanalytical performance of ZC/NCS was studied with different voltammetric approaches. Based on the results, our prepared ZC/NCS demonstrated a low limit of detection (1.1 nM and 2.6 nM), satisfactory linear ranges of 0.01–297 μM (at low concentration), and 297–2187 μM (at high concentration), optimal sensitivity (0.374 μA μM −1 cm −2 ), and high performance. Furthermore, the designed sensor was applied to monitor RZ in environmental (river water), animal (chicken meat extract), and human (urine) samples, with remarkable recovery values (98.6–101.8%). Therefore, our prepared ZC/NCS composite is a promising electrode material for the real-time analysis of RZ.

environmental sciences,chemistry, multidisciplinary,nanoscience & nanotechnology
A robust combination of dysprosium vanadate/halloysite nanotubes: the electrochemical system for dimetridazole detection

T. Kokulnathan,T.-W. Chen,S.-M. Chen,F. Ahmed,P.M.Z. Hasan,A.L. Bilgrami,S. Kumar

DOI: https://doi.org/10.1016/j.mtchem.2022.100890

IF: 7.613

2022-06-01

Materials Today Chemistry

Abstract:Dimetridazole (DMD) is one of the significant antibiotic drugs of nitroimidazoles derivates that have attracted increasing attention in the medical field due to its pharmacological and toxicological activity. The development of high-performance sensors for continuous monitoring of DMD in food and environments is receiving increasing attention. Herein, an electrochemical platform was designed based on a dysprosium vanadate/halloysite nanotubes (DyV/HNTs) nanocomposite for the detection of DMD. The DyV/HNTs nanocomposite was examined by various spectroscopic and analytical techniques. The DyV/HNTs based electrochemical sensor reveals a distinctly higher electrocatalytic response to the reduction of DMD due to the good physiochemical properties compared to other electrodes. The DyV/HNTs based electrochemical sensor for DMD covered two linear ranges of 0.001–0.54 and 0.54–188 μM with a detection limit of 0.9 nm through the amperometric method, which is better than those previously reported. Furthermore, selectivity, stability, repeatability, and reproducibility studies were performed. Moreover, the fabricated DyV/HNTs sensor was successfully applied for the reliable discrimination of DMD in biological and water samples with satisfactory recovery values. The results indicated that this DyV/HNTs nanocomposite may be a promising electrochemical sensing platform for the determination of DMD.

chemistry, multidisciplinary,materials science
Hydrothermally synthesized cubical zinc manganite nanostructure for electrocatalytic detection of sulfadiazine

Subramaniyan Vinoth,Mani Govindasamy,Sea-Fue Wang,Asma A. Alothman,Razan A. Alshgari

DOI: https://doi.org/10.1007/s00604-021-04768-3

IF: 5.7

2021-03-19

Microchimica Acta

Abstract:An electrocatalyst modified electrode has been investigated to develop the rapid detection of antibiotics. The modified electrocatalyst was intended for the determination of sulfadiazine (SFZ) in biological fluids by electrochemical methods. Nanocube of zinc manganite (ZnMn2O4-NC) is prepared by hydrothermal method and a glassy carbon electrode (GCE) has been modified with the zinc manganite. The ZnMn2O4/GCE exhibit enhanced detection performances towards SFZ drug owing to their selective adsorption ability and the combination of electrostatic attraction of nanocube with SFZ. The modified electrocatalyst shows excellent electrocatalytic interactions with antibiotic drug. Besides, the modified sensors exhibit nanomolar detection limit (0.0021 μM) in 0.05 M phosphate buffer (pH = 7.0) using differential pulse voltammetric method. The working range of the modified electrode is 0.008–1264 μM, and the sensitivity of the SFZ sensor is 11.44 μA μM–1 cm–2. The modified sensor stability and reproducibility performances have been examined by electrochemical method. In addition, the obtained results of real sample analysis with different concentrations of SFZ in biological fluids are satisfactory with good recovery.

chemistry, analytical
Design of sonochemical assisted synthesis of Zr-MOF/g-C3N4-modified electrode for ultrasensitive detection of antipsychotic drug chlorpromazine from biological samples

M A Ashkar,S Kutti Rani,N Vasimalai,Chih-Yu Kuo,Kareem Yusuf,Mani Govindasamy

DOI: https://doi.org/10.1007/s00604-024-06253-z

2024-03-07

Abstract:The rapid fabrication is described of binary electrocatalyst based on a highly porous metal-organic framework with zirconium metal core (Zr-MOF) decorated over the graphitic carbon nitride (g-C3N4) nanosheets via facile ultrasonication method. It is used for the robust determination of antipsychotic drug chlorpromazine (CLP) from environmental samples. The electrochemical behaviour of 2D Zr-MOF@g-C3N4 was characterized by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS) studies. The crystalline and porous nature of the composite was characterized by XRD and SEM analysis. The functional groups and surface characteristics were investigated by FT-IR, Raman and XPS. The major electrochemical properties of the Zr-MOF@g-C3N4 composite towards CLP detection were analyzed by CV, chronocoulometric (CC), chronoamperometric (CA) and differential pulse voltammetry (DPV) techniques. The composite exhibits a low detection limit (LOD) of 2.45 nM with a linear range of 0.02 to 2.99 µM and attractive sensitivity for CLP. The sensor system shows higher selectivity towards the possible interferences of CLP drug and exhibits better repeatability and stability. Finally, the fabricated sensor system shows a high recovery range varying from 96.2 to 98.9% towards the real samples. The proposed electrochemical probe might be a promising alternative to the prevailing diagnostic tools for the detection of CLP.
Manganese Molybdenum Oxide Micro Rods Adorned Porous Carbon Hybrid Electrocatalyst for Electrochemical Determination of Furazolidone in Environmental Fluids

Sivakumar Musuvadhi Babulal,Tse-Wei Chen,Shen-Ming Chen,Wedad A. Al-Onazi,Amal M. Al-Mohaimeed

DOI: https://doi.org/10.3390/catal11111397

IF: 3.9

2021-11-18

Catalysts

Abstract:The frequent occurrence of furazolidone (FZD) in environmental fluids reveals the ongoing increase in use and raises concerns about the need of monitoring it. To investigate the electrochemical behavior of FZD, a novel sensor of manganese molybdenum oxide (MMO) micro rods adorned three-dimensional porous carbon (PC) electrocatalyst was constructed. The crystalline structure and surface morphology of the MMO/PC composite was characterized by XRD, Raman, FESEM, and HR-TEM. Electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV), and amperometric(i-t) methods were used to assess the electrocatalytic activity of modified electrodes. In the presence of FZD, the as-fabricated MMO/PC modified glassy carbon electrode (GCE) performed better at lower potentials with a greater peak current than other modified GCE. These results emanate from the synergistic effect of the MMO/PC suspension on the GCE. The electrochemical behavior of the amperometric(i-t) technique was used to determine FZD. Amperometric(i-t) detection yielded linear dynamic ranges of 150 nM to 41.05 μM and 41.05 to 471.05 μM with detection limits of 30 nM. The MMO/PC hybrid sensor was also effectively used to detect FZD in environmental fluids, yielding ultra-trace level detection.

chemistry, physical
A novel electrochemical strategy using a newly developed carbon-based sensor for the detection of antihypertensive drug: Hydralazine hydrochloride

Manjunath B. Megalamani,Sharanappa T. Nandibewoor

DOI: https://doi.org/10.1016/j.diamond.2024.110795

IF: 3.806

2024-01-11

Diamond and Related Materials

Abstract:Hydralazine hydrochloride (HZH) is a popular nonsteroidal anti-inflammatory vasodilator. HZH was explored using Zirconium-doped ZnO nanoparticles drop-casted on a β-cyclodextrin (β-CDX) modified carbon paste electrode (Zr:ZnO/β-CDX@CPE). X-ray diffraction (XRD) and scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDX) were used to characterize the sample. Electrochemical impedance spectroscopy (EIS) assessed material performance. HZH was tested under different phosphate buffer conditions using Cyclic voltammetry (CV) and square wave voltammetry (SWV). Results were best at pH 7.0 in the potential range of −0.4 V to 0.7 V. The diffusion electrode technique was utilized to study the effects of different factors on the electrochemical characteristics. Quantitative evaluation of HZH was performed using SWV in the concentration range of 0.8–20 μM, showing linearity. The limit of detection (LOD) and limit of quantification (LOQ) were determined as 4.8 × 10 −9 M and 16.2 × 10 −9 M, respectively. This innovative technique was successfully applied to measure HZH in biological and water samples.

materials science, multidisciplinary,physics, applied, condensed matter, coatings & films
Synthesis of hierarchical porous ZIF-8/3DCNTs composite sensor for ultrasensitive detection of DA and DFT studies

Taotao Fan,Li Chen,Shunguo Qiu,Chanyuan Yang,Lihua Hu,Xiong Peng,Jianwei Zhang,Zongcheng Yan

DOI: https://doi.org/10.1016/j.jelechem.2020.114541

IF: 4.598

2020-12-01

Journal of Electroanalytical Chemistry

Abstract:A hybrid nanocomposite of hierarchical porous zeolitic imidazolate framework-8 / three-dimensional carbon nanotubes (HP-ZIF-8/3DCNTs) has been successfully fabricated by constructing micelle by sodium dodecyl sulfate (SDS) and deep eutectic solvent (DES) aqueous solution to grow HP-ZIF-8 in situ on the 3DCNTs template. The electrochemical performance for detecting dopamine (DA) is greatly improved owing to the synergism of highly conductive CNTs and hierarchical porous ZIF-8. At the same time, the electrochemical reaction of DA on HP-ZIF-8/3DCNTs/GCE is an adsorption control process, and density function theory (DFT) calculation was performed to analysis the charge distribution and interaction force of DA and dopaminophenone in the material, forming a molecular complex with adsorption energy of −19.11 and − 25.21 kJ/mol−1. In addition, the response current is linear when the DA content is 1.0 × 10−7 to 1.0 × 10−4 M, the LOD is 2.7 × 10−8 M at S/N = 3. The electrode material has excellent selectivity, sterling reproducibility of 2.21% and satisfactory repeatability with a RSD of 1.96%, and splendid long-term stability with peak current maintained 96.03% of the initial value after 14 days. The results indicate that HP-ZIF-8/3DCNTs composite has broad application prospects in the field of electrochemical sensing, and its modification methods and theoretical concepts can potentially be applied to the research of other sensors.

chemistry, analytical,electrochemistry
Zinc molybdate/functionalized carbon nanofiber composites modified electrodes for high-performance amperometric detection of hazardous drug Sulfadiazine

Kumar Gokulkumar,Song-Jeng Huang,Sea-Fue Wang,Ramachandran Balaji,Narendhar Chandrasekar,Michael Taeyoung Hwang

DOI: https://doi.org/10.1016/j.onano.2023.100131

2023-02-22

OpenNano

Abstract:Pharmaceuticals are generally designed to be nondegradable or slowly degradable to prevent chemical degradation as it is employed as therapeutics for human or animal. This results in a widespread risk when they enter, accumulate or persist in the environment. Pharmaceutical pollution is emerging as wide-reaching concern due to its ostensible consequences, by dissemination in the environment. This demands for inventing novel analytical routes to monitor and mitigate pharmaceutical pollutants. Therefore, this paper presents synthesis of Zinc molybdate nano particles embedded on functionalized carbon nanofibers to fabricate glassy carbon electrode towards sensitive detection of Sulfadiazine (SDZ). The synergistic effect produced in the composite had enabled it with improved charge transfer kinetics and benefited with more active surface area. The proposed ZnMoO 4 /f-CNF sensor shows significant static characteristics such as wide linear response ranges (0.125 to1575.2 μM), low detection limit (0.0006 μM) and selectivity, and increased stability. Also, its practicability was analyzed by SDZ detection in real samples.
Snowflake-shaped poly (3-thiophenemalonic acid) combined with the carbonized ZIF-8@ZIF-67 hollow polyhedron for sensitive electrochemical detection of metronidazole

Yafeng Jin,Fangming Han,Tao Wang,Haofu Shi,Xiaobo Li,Li Yang,Na Chen,Kaifeng Yang,Xinyue Song,Guang-ri Xu

DOI: https://doi.org/10.1039/d4nj01982b

IF: 3.3

2024-06-12

New Journal of Chemistry

Abstract:Developing a facile and effective assay method is crucial due to the potential harm of metronidazole (MNZ) antibiotics to both human health and the environment. Herein, snowflake-shaped poly (3-thiophenemalonic acid, 3-TPA) combined with the carbonized core-shell-type ZIF-8@ZIF-67 (C-ZIF-8@ZIF-67) hollow polyhedron modified glassy carbon electrode (GCE), denoted as C-ZIF-8@ZIF-67/P3TPA/GCE, was fabricated by electropolymerization followed by electrodeposition strategy. The resulting sensor demonstrates a significant electrocatalysis effect for the reduction reaction of MNZ, exhibiting a broad linear range (0.1–20, 20–800 μM) with a low limit of detection (LOD, 3S/N) of 0.024 μM. Furthermore, it has been successfully applied to determine MNZ in tablets and lake water. A synergistic effect between P 3-TPA and C-ZIF-8@ZIF-67 is elucidated through density functional theory (DFT) calculations. Consequently, this research introduces a sensitive and effective method for monitoring MNZ in real samples.

chemistry, multidisciplinary
Novel Synthesis of Ca2+-Doped MgAl2O3-G-SiO2 Mesoporous Nanospheres toward Sensing Effects for Selective Electrochemical Performance of Azithromycin

Kwang Youn Cho,Chong-Hun Jung,Won-Chun Oh

DOI: https://doi.org/10.1007/s12257-022-0071-3

IF: 3.386

2022-10-25

Biotechnology and Bioprocess Engineering

Abstract:Azithromycin is one of the most concentrated antibiotics in wastewater, as conventional wastewater treatment facilities cannot eliminate this antibiotic from the environment. In this study, we proposed using a graphene-based mesoporous electrochemical sensor to take simultaneous voltammetric measurements of azithromycin. Because of its homogeneous pore structure, large surface area, quick electron transfer rate, and superior biocompatibility, magnesium-containing mesoporous silica is a promising resource for the immobilization of biomolecule matrix. Ca 2+ -doped MgAl 2 O 3 -G-SiO 2 was used to build an amperometric biosensor through a self-assembly process. At room temperature in a buffer solution with a pH of 7.0, the modified electrode under ideal circumstances displayed good azithromycin sensing activity, a linear range of 1 to 5 μmolL −1 , a detection limit of 0.5 μmolL −1 , and a reaction time of less than 2 sec. An array of morphological analysis methods—including X-ray diffraction methos, scanning electron microscopy, Brunauer-Emmett-Teller method, high resolution tunneling electron microscopy, Raman, diffuse reflectance spectroscopy, and X-ray photoelectron spectroscopy—was used to examine the nanocomposite's crystalline structure. Cyclic voltammetry was used to determine the sensing effects in the mesoporous active nanomaterials. Finally, it was found that the electrochemical sensor performed as an ideal biosensor that was able to detect azithromycin in the presence of several interfering species with high stability, selectivity, and repeatability.

biotechnology & applied microbiology
Zinc Oxide Anchored Porous Reduced Graphene Oxide: Electrode Material for Sensing of Ezetimibe

Naveenkumar P Agadi,Nagappa L Teradal,Manjunatha D H,Jaldappagari Seetharamappa

DOI: https://doi.org/10.1149/1945-7111/ad2f78

IF: 3.9

2024-03-04

Journal of The Electrochemical Society

Abstract:A new and sensitive electrochemical sensing platform was developed based on zinc oxide anchored porous reduced graphene oxide nanocomposite (ZnO/prGO) for a dyslipidemic agent, ezetimibe (EZT). ZnO nanoparticles (NPs) were prepared by treating zinc acetate solution with an environmental friendly precursor, Balanitesroxburghii date fruit extract. ZnO/prGO was characterized systematically by XRD, UV-vis, FT-IR, SEM-EDX and impedance spectroscopic techniques. The proposed sensor, ZnO/prGO/GCE, showed excellent sensitivity for EZT due to porogenic nature and improved electron transfer capability of the electrode material. EZT exhibited an anodic peak with 18-fold enhancement in peak current at ZnO/prGO/GCE when compared to that at bare GCE. Linearity was observed between the peak current and concentration of EZT in the range of 0.1–51.1 μM and 0.05–62.5 μM for SWV and DPV methods, respectively. SWV method was developed for the determination of EZT with a lowest LOD of 0.03 μM. The fabricated electrochemical sensor displayed good selectivity for EZT in the presence of excipients. The applicability of the proposed sensor was demonstrated by determining EZT in spiked urine samples and pharmaceutical formulations. The results of analysis were found to be accurate with more than 97% recovery and precise with RSD values of less than 3.0%.

electrochemistry,materials science, coatings & films
Diltiazem-imprinted porphyrinic covalent organic frameworks as solid-phase extractants and fluorescent sensors

Ching-Bin Ke,Ru-Yu Yan,Jian-Lian Chen,Te-Ling Lu

DOI: https://doi.org/10.1016/j.aca.2021.338608

IF: 6.911

2021-07-01

Analytica Chimica Acta

Abstract:Diltiazem, which is a calcium channel blocker, is involved in the formation of covalent organic frameworks (COFs) through the Schiff base reaction of tetrakis (4-aminophenyl)-porphine (TAPP) and dihydroxynaphthalene-dicarbaldehyde (DHNDC) and the next enol-to-keto tautomerization. The diltiazem-imprinted COFs (DICOFs) were optimally formed using Sc(OTf)3 as the catalyst, TAPP/DHNDC/diltiazem in a molar ratio of 2/3/4, N-methylpyrrolidone/mesitylene (v/v = 3/5) as the porogen, and a 1-h reaction with a high imprinting factor of 10.5 compared to the nonimprinted counterparts (NICOFs). The optimized DICOF exhibited a more amorphous XRD pattern, a larger surface area (1650 vs. 930 m2/g), a larger pore volume (1.33 vs. 0.75 cm3/g), and a finer porous SEM feature than NICOF. The selectivity of NICOF toward diltiazem and diazepam at 250 nM (α = 1.03, RSD = 1.3%) was smaller than the selectivity of DICOF (α = 2.94, RSD = 1.6%). The diltiazem samples (5.0-300 ng mL-1) dynamically quenched the fluorescence of 15 μg/mL DICOF in 50 mM phosphate buffer at pH 6.5 at 8.0 min equilibrium; thus, Stern-Volmer plots were linearly constructed for sensing diltiazem with an LOD of 3.4 ng mL-1 and an LOQ of 10.2 ng mL-1. According to the plots, 30 ng mL-1 diltiazem solutions that were diluted from 30 mg-specified tablets had an average measured concentration of 29.5 ng mL-1 (σ = 1.3% and n = 5). In addition to application as fluorescent sensors, DICOFs (30 mg) could be used as dispersive extractants to recover 95.2% of 0.6 ng mL-1 diltiazem from 25 mL phosphate buffer with quadruplicate uses of 0.5 mL methanol/acetic acid (v/v = 9/1) as the eluent. Langmuir and pseudo-second-order models were fitted to the isothermal and kinetic sorption mechanisms, respectively. The maximum sorption capacity of DICOF was ten times larger than that of NICOF (156 vs. 15.2 mg/g). The interday recoveries of 0.6 ng mL-1 spiked in 20-fold diluted human urine, and 60-fold diluted human serum were 93.2% and 90.6%, respectively.

chemistry, analytical
Design of Nanostructured Hybrid Electrodes Based on a Liquid Crystalline Zn(II) Coordination Complex-Carbon Nanotubes Composition for the Specific Electrochemical Sensing of Uric Acid

Sorina Negrea,Carmen Cretu,Liliana Cseh,Mircea Rastei,Bertrand Donnio,Florica Manea,Adelina A. Andelescu,Sorina Ilies (b. Motoc),Elisabeta I. Szerb

DOI: https://doi.org/10.3390/nano12234215

IF: 5.3

2022-11-27

Nanomaterials

Abstract:A metallomesogen based on an Zn(II) coordination complex was employed as precursor to obtain a complex matrix nanoplatform for the fabrication of a high-performance electrochemical hybrid sensor. Three representative paste electrodes, which differ by the weight ratio between Zn(II) metallomesogen and carbon nanotubes (CNT), i.e., PE_01, PE_02 and PE_03, were obtained by mixing the materials in different amounts. The composition with the largest amount of CNT with respect to Zn complex, i.e., PE_03, gives the best electrochemical signal for uric acid detection by cyclic voltammetry in an alkaline medium. The amphiphilic structure of the Zn(II) coordination complex likely induces a regular separation between the metal centers favoring the redox system through their reduction, followed by stripping, and is characterized by enhanced electrocatalytic activity towards uric acid oxidation. The comparative detection of uric acid between the PE_03 paste electrode and the commercial zinc electrode demonstrated the superiority of the former, and its great potential for the development of advanced electrochemical detection of uric acid. Advanced electrochemical techniques, such as differential-pulsed voltammetry (DPV) and square-wave voltammetry (SWV), allowed for the highly sensitive detection of uric acid in aqueous alkaline solutions. In addition, a good and fast amperometric signal for uric acid detection was achieved by multiple-pulsed amperometry, which was validated by urine analysis.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Equipment of Vertically-Ordered Mesoporous Silica Film on Electrochemically Pretreated Three-Dimensional Graphene Electrodes for Sensitive Detection of Methidazine in Urine

Xiaochun Deng,Xueting Lin,Huaxu Zhou,Jiyang Liu,Hongliang Tang

DOI: https://doi.org/10.3390/nano13020239

IF: 5.3

2023-01-05

Nanomaterials

Abstract:Direct, rapid, and sensitive detection of drugs in complex biological samples is essential for drug abuse control and health risk assessment. In this work, an electrochemical sensor was fabricated based on equipment of vertically-ordered mesoporous silica film (VMSF) on an electrochemically pre-treated three-dimensional graphene electrode (p-3DG), which can achieve direct and sensitive determination of methylthiopyridazine (TR) in urine. Three-dimensional graphene (3DG) with a continuous and interpenetrating graphene network was used as the supporting electrode and simple electrochemical polarization was employed to pre-treat 3DG to improve surface hydrophilicity and electrocatalytic performance. VMSF was easily grown using an electrochemical assisted self-assembly method within 10 s and was stably bound to the p-3DG surface. The nanochannel array on the as-prepared VMSF/p-3DG sensor enriched positively charged TR, leading to significantly improved electrochemical signal. Combined with the high electric activity of p-3DG and the enrichment of nanochannels, VMSF/p-3DG realized sensitive determination of TR ranging from 50 nM to 10 μM with a low detection limit (DL, 30 nM). Owing to the anti-fouling and anti-interference performance of VMSF, the common electroactive molecules including ascorbic acid (AA) and uric acid (UA) did not interfere with the detection. In addition, the detection of TR in buffer and urine exhibited similar sensitivity. Accurate detection of TR in urine was realized.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
[Increasing bone screw anchoring in the femur head by cement administration via the implant--a biomechanical study].

A. Kramer,M. Angst,B. Gasser,R. Ganz

Zeitschrift für Orthopädie und ihre Grenzgebiete

Abstract:PURPOSE Osteoporosis reveals a higher risk of fractures. Due to the lack of possibilities to anchor fixation elements, fracture treatment often turns out to be complicated. An experimental study served to investigate the extent to which the application of bone cement through a modified gliding screw (Dynamic Hip Screw DHS) would improve the screw anchoring in osteoporotic femoral heads. METHODS Quasi-static compressive and torsional load tests were used to assess the desired improvement of the screw anchoring. Cadaver femur pairs served to compare the cement augmentation to the uncemented contralateral control. RESULTS The improvement of the holding strength of the screw under static compressive and torsional load depended on the cement flow into the adjacent bone tissue. The filling with additional cement was only successful after having created a small hollow space at the screw tip with a special instrument. Consequently, under compression as well as torsion, the cement application yielded improvements from 17% up to several times as much. CONCLUSION In the application of gliding screws in osteoporotic femoral heads, the locally limited cement application through the implant has been shown to be a biomechanical possibility to improve screw fixation.
Novel electrochemical sensing platform based on a molecularly imprinted polymer decorated 3D nanoporous nickel skeleton for ultrasensitive and selective determination of metronidazole

Yingchun Li,Yuan Liu,Yang Yang,Feng Yu,Jie Liu,Han Song,Jiang Liu,Hui Tang,Bang-Ce Ye,Zhipeng Sun

DOI: https://doi.org/10.1021/acsami.5b03755

2015-07-22

Abstract:A novel electrochemical sensor has been developed by using a composite element of three-dimensional (3D) nanoporous nickel (NPNi) and molecularly imprinted polymer (MIP). NPNi is introduced in order to enhance the electron-transport ability and surface area of the sensor, while the electrosynthesized MIP layer affords simultaneous identification and quantification of the target molecule by employing Fe(CN)6(3-/4-) as the probe to indicate the current intensity. The morphology of the hybrid film was observed by scanning electron microscopy, and the properties of the sensor were examined by cyclic voltammetry and electrochemical impedance spectroscopy. By using metronidazole (MNZ) as a model analyte, the sensor based on the MIP/NPNi hybrid exhibits great features such as a remarkably low detection limit of 2 × 10(-14) M (S/N = 3), superb selectivity in discriminating MNZ from its structural analogues, and good antiinterference ability toward several coexisting substances. Moreover, the proposed method also demonstrates excellent repeatability and stability, with relative standard deviations of less than 1.12% and 1.4%, respectively. Analysis of MNZ in pharmaceutical dosage form and fish tissue is successfully carried out without assistance of complicated pretreatment. The MIP/NPNi composite presented here with admirable merits makes it a promising candidate for developing electrochemical sensor devices and plays a role in widespread fields.
Mesoporous silica nanoparticles decorated with C 3 N 4 framework as a novel electrocatalyst for the design of a selective clonazepam sensor

Fardin Abedi,Hamid Reza Rajabi,Mahmoud Roushani,Zahra Rafiee,Ensiyeh Rahmati

DOI: https://doi.org/10.1016/j.jmrt.2024.03.032

IF: 6.267

2024-03-08

Journal of Materials Research and Technology

Abstract:In this study, a new chemical modifier based on copper nitrate hydroxide-containing mesoporous silica decorated with a C 3 N 4 framework (MSN/C 3 N 4 /CNH ) was developed to design a modified sensor for the determination of clonazepam (CZP). The resulting composite was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), energy-dispersive X-ray spectroscopy (EDS), simultaneous thermal analysis (STA), Brunauer-Emmett-Teller (BET) and Barrett Joyner–Halenda (BJH) analyses. The fabricated electrochemical sensor which was designed with a new modified glassy carbon electrode (GCE) for CZP analysis, exhibits outstanding electrocatalytic activities toward the reduction of CZP. The results showed that significant sensitivity compared to existing methods improved with an excellent detection limit of 2.50 nmol L −1 for the CZP detection, and the modified electrode has high activity toward the oxidation and reduction of CZP, with an oxidation peak around 0.32 V, and a lower reduction peak around −0.78 V; at pH = 7.0. The effect of experimental and instrumental factors on the electrochemical sensor response was examined, and the cyclic voltammetric results confirmed the 4H + /4e − process in the electrochemical studies. Moreover, in differential pulse voltammetry, the reduction peak current was proportional toward the CZP concentration from 0.82 to 76.90 μmol L −1 , at optimum conditions. The modified electrode showed good reproducibility, and repeatability with relative standard deviation values of 2.7% and 1.2%, respectively. The proposed method can be applied as a simple, selective, and precise method to determine CZP drug in real samples, with satisfactory results.

materials science, multidisciplinary,metallurgy & metallurgical engineering

Nanometer-sized fluorous fullerene vesicles in water and on solid surfaces.

A novel ammonium zinc molybdate layered double hydroxide nanoflakes/vapor grown carbon fibers nanomaterials based electrocatalyst for the monitoring of dimetridazole drug in real samples

Dual biomass-derived porous carbon heterogeneous functionalized mesoporous CuCo2O4 nanocomposite combined with molecularly imprinted polymers as an electrochemical sensing platform for hypersensitive and selective determination of dimetridazole contaminants

A piece of my mind. Death and life in Iraq.

3D architectured zinc–chromium layered double hydroxide with nickel cobalt sulfide composite for the electrochemical detection of ronidazole

A robust combination of dysprosium vanadate/halloysite nanotubes: the electrochemical system for dimetridazole detection

Hydrothermally synthesized cubical zinc manganite nanostructure for electrocatalytic detection of sulfadiazine

Design of sonochemical assisted synthesis of Zr-MOF/g-C3N4-modified electrode for ultrasensitive detection of antipsychotic drug chlorpromazine from biological samples

Manganese Molybdenum Oxide Micro Rods Adorned Porous Carbon Hybrid Electrocatalyst for Electrochemical Determination of Furazolidone in Environmental Fluids

A novel electrochemical strategy using a newly developed carbon-based sensor for the detection of antihypertensive drug: Hydralazine hydrochloride

Synthesis of hierarchical porous ZIF-8/3DCNTs composite sensor for ultrasensitive detection of DA and DFT studies

Zinc molybdate/functionalized carbon nanofiber composites modified electrodes for high-performance amperometric detection of hazardous drug Sulfadiazine

Snowflake-shaped poly (3-thiophenemalonic acid) combined with the carbonized ZIF-8@ZIF-67 hollow polyhedron for sensitive electrochemical detection of metronidazole

Novel Synthesis of Ca2+-Doped MgAl2O3-G-SiO2 Mesoporous Nanospheres toward Sensing Effects for Selective Electrochemical Performance of Azithromycin

Zinc Oxide Anchored Porous Reduced Graphene Oxide: Electrode Material for Sensing of Ezetimibe

Diltiazem-imprinted porphyrinic covalent organic frameworks as solid-phase extractants and fluorescent sensors

Design of Nanostructured Hybrid Electrodes Based on a Liquid Crystalline Zn(II) Coordination Complex-Carbon Nanotubes Composition for the Specific Electrochemical Sensing of Uric Acid

Equipment of Vertically-Ordered Mesoporous Silica Film on Electrochemically Pretreated Three-Dimensional Graphene Electrodes for Sensitive Detection of Methidazine in Urine

[Increasing bone screw anchoring in the femur head by cement administration via the implant--a biomechanical study].

Novel electrochemical sensing platform based on a molecularly imprinted polymer decorated 3D nanoporous nickel skeleton for ultrasensitive and selective determination of metronidazole

Mesoporous silica nanoparticles decorated with C 3 N 4 framework as a novel electrocatalyst for the design of a selective clonazepam sensor