The thermal unfolding of ribonuclease A. A 13C NMR study.

O. Howarth

DOI: https://doi.org/10.1016/0005-2795(79)90495-1

1979-01-25

Biochimica et Biophysica Acta

Abstract:

What problem does this paper attempt to address?

Virtual And Medical Prototype Assisted Craniofacial Reconstructive Surgery

B Starly,Jh Piatt,W Sun,E Faerber

2005-01-01

Abstract:Computer aided design models in the form of 3-dimensional visual computer models or in the form of actual physical prototypes has aided surgeons in the reconstructive surgical procedure although in only qualitative terms. The goal of this research is to harness the full power of modern computer imaging technologies for quantitative control of craniofacial reconstructive procedures. This research has addressed: 1) a science and technology based approach to the construction of BioCAD models from patient specific anatomical images; 2) the application of such models to craniofacial surgical planning using computer aided design technology, and 3) the marriage of BioCAD models and/or prototypes with commercially available surgical image guidance systems in the operating room. This scheme presented here can be incorporated within any hospital environment.
Virtual Surgical Planning and Pre-operative Simulation for Maxillofacial Reconstruction with 3D Printing Technology in Tumor-affected Facial Deformity

Gyeong-Man Kim,Masreshaw Demelash Bayleyegn,Song-Jung Kim

DOI: https://doi.org/10.21203/rs.3.rs-90685/v1

2020-10-15

Abstract:Abstract BackgroundThe high anatomical complexity of maxillofacial defects caused by tumor can pose a formidable challenge for clinicians when designing an appropriate plan for surgical reconstruction. The intention of this work was to restore the complex anatomy with maximum possible facial functionality and aesthetics of the patient. Based on the medical images generated by computed tomography (CT) scan an optimal therapeutic planning for complex maxillofacial reconstruction was designed. MethodFirstly, the volumetric data sets were carefully evaluated and deeply inspected for accurate diagnosis. Regarding 3D visualization of the CT scan images 3D virtual models for regions of interest were created using a special software of 3D Slicer. Using the resulting 3D virtual models a well-defined virtual surgical planning was generated for multiple surgical procedures, including the osteotomies for bone defects, harvesting autogenous bone graft and creating a customized implant. ResultsThe relevant patient-specific anatomical models for real surgery were translated into the 3D printed physical models, with which the surgeons can rehearse the surgery before coming into the operating room. Precisely defined multiple surgeries for complex maxillofacial reconstruction were proposed in this research that could be transferred to the real-time surgery. ConclusionsThe proposed surgical approach will be beneficial both for the surgeons and patient, including improvement in surgical precision and outcomes, reduction in operating time, as well as understanding surgical procedures and decision making etc.
Cinematic Rendering in Mixed-Reality Holograms: A New 3D Preoperative Planning Tool in Pediatric Heart Surgery

Pia Gehrsitz,Oliver Rompel,Martin Schöber,Robert Cesnjevar,Ariawan Purbojo,Michael Uder,Sven Dittrich,Muhannad Alkassar

DOI: https://doi.org/10.3389/fcvm.2021.633611

IF: 3.6

2021-02-09

Frontiers in Cardiovascular Medicine

Abstract:Cinematic rendering (CR) is based on a new algorithm that creates a photo-realistic three-dimensional (3D) picture from cross-sectional images. Previous studies have shown its positive impact on preoperative planning. To date, CR presentation has only been possible on 2D screens which limited natural 3D perception. To depict CR-hearts spatially, we used mixed-reality technology and mapped corresponding hearts as holograms in 3D space. Our aim was to assess the benefits of CR-holograms in the preoperative planning of cardiac surgery. Including 3D prints allowed a direct comparison of two spatially resolved display methods. Twenty-six patients were recruited between February and September 2019. CT or MRI was used to visualize the patient's heart preoperatively. The surgeon was shown the anatomy in cross-sections on a 2D screen, followed by spatial representations as a 3D print and as a high-resolution hologram. The holographic representation was carried out using mixed-reality glasses (HoloLens®). To create the 3D prints, corresponding structures were segmented to create STL files which were printed out of resin. In 22 questions, divided in 5 categories (3D-imaging effect, representation of pathology, structure resolution, cost/benefit ratio, influence on surgery), the surgeons compared each spatial representation with the 2D method, using a five-level Likert scale. The surgical preparation time was assessed by comparing retrospectively matched patient pairs, using a paired t -test. CR-holograms surpassed 2D-monitor imaging in all categories. CR-holograms were superior to 3D prints in all categories (mean Likert scale 4.4 ± 1.0 vs. 3.7 ± 1.3, P < 0.05). Compared to 3D prints it especially improved the depth perception (4.7 ± 0.7 vs. 3.7 ± 1.2) and the representation of the pathology (4.4 ± 0.9 vs. 3.6 ± 1.2). 3D imaging reduced the intraoperative preparation time ( n = 24, 59 ± 23 min vs. 73 ± 43 min, P < 0.05). In conclusion, the combination of an extremely photo-realistic presentation via cinematic rendering and the spatial presentation in 3D space via mixed-reality technology allows a previously unattained level of comprehension of anatomy and pathology in preoperative planning.

cardiac & cardiovascular systems
THE APPLICATION OF RAPID PROTOTYPING IN THE ORTHOGNATHIC SURGERY

Fu-dong ZHU,Shi-fang ZHAO,Zhi-jian XIE,Zhe-feng YU,Chen JIANG

DOI: https://doi.org/10.3321/j.issn:0529-1356.2006.05.017

2006-01-01

Abstract:Objective: To construct a geometric skull model by using three-dimensional reconstruction, computer tomography scanning and rapid prototyping technology and evaluate its significance in treatment of complex oral and maxillofacial deformities. Methods: A cranial and a goldenhar syndrome patient with complex oral and maxillofacial deformities bone received continuous volumetric scanning of skull and the data acquisition was done by an electron computed tomography, by which reconstruction was performed and the obtained images saved as STL files. Then the data were input into rapid prototyping machine to make three-dimensional geometric model. Direct measurement, designation and surgery simulation could be done on this three-dimensional model. Then the mandibular mirror physical model was manufactured using rapid prototyping according to the normal side. Results: A computer-aided model according to CT data could represent the three-dimensional anatomic structures and their relationships precisely. The replica exhibited dimensional errors ranging 0.02 mm to 0.53 mm. Which provided strong basis for accurate understanding of disease status and reasonable surgical plans and helped improve the curative effect of surgery. Conclusion: Rapid prototyping can help surgeons in many ways for therapy of the complex oral and maxillofacial deformities.
Craniomaxillofacial Surgery with Computer-generated Three-dimensional Solid Models

Atilla Adnan Eyuboglu,Mustafa Tonguc Isken,Volkan Etus,Reha Yavuzer,Cenk Sen,Deniz Iscen,Ahmet Demir

DOI: https://doi.org/10.14744/SEMB.2024.13844

2024-09-30

Abstract:Objectives: Restoring complex craniofacial deformities presents numerous challenges. Recent years have seen the development of new surgical techniques aimed at improving operation quality and reducing difficulty. However, designing the reduction volume for the affected region and achieving precise contouring remain difficult tasks. The use of three-dimensional (3D) solid models can provide significant assistance at all stages of the operations. This study aimed to investigate the validity of prototype 3D solid models for complex craniofacial operations. Methods: Simulated 3D models of the patients were used. Conventional surgical instruments were employed for the planning of the operations. Patients had follow-up periods ranging from 6 to 18 months. Results: Operations have been planned and performed using three-dimensional solid models. Intraoperative steps were executed as simulated during planning. No major complications were developed. All bone and soft-tissue reconstructions healed without major infection. Conclusion: Stereolithographic models provide: 1) a better understanding of anatomy, 2) presurgical simulation, 3) intraoperative accuracy in lesion localization, 4) accurate fabrication of implants, and 5) improved education for trainees. An accurate method for intraoperative navigation and preoperative planning is clearly useful. This technology offers a direct representation of the patient's anatomy through computer reconstruction, allowing for the efficient and precise transfer of information in complex facial restorative procedures.
Computerized Surgical Planning in Face Transplantation

Alay Shah,Sachin Chinta,Eduardo D. Rodriguez

DOI: https://doi.org/10.1055/s-0044-1786991

2024-05-28

Seminars in Plastic Surgery

Abstract:Face transplantation (FT) has emerged as a critical intervention for patients with complex facial deformities unsuitable for conventional reconstructive methods. It aims to restore essential functions such as facial expression, mastication, and speech, while also improving psychosocial health. The procedure utilizes various surgical principles, addressing unique challenges of craniofacial complexity and diverse injury patterns. The integration of Computerized Surgical Planning (CSP) leverages computer-aided technologies to enhance preoperative strategy, intraoperative navigation, and postoperative assessment. CSP utilizes three-dimensional computed tomography, printing, angiography, and navigation systems, enabling surgeons to anticipate challenges and reduce intraoperative trial and error. Through four clinical cases, including a groundbreaking combined face and bilateral hand transplant, CSP's role in FT is highlighted by its ability to streamline operative processes and minimize surgical revisions. The adoption of CSP has led to fewer cadaveric rehearsals, heightened operative precision, and greater alignment with preoperative plans. Despite CSP's advancements, it remains complementary to, rather than a replacement for, clinical expertise. The demand for technological resources and multidisciplinary teamwork is high, but the improved surgical outcomes and patient quality of life affirm CSP's value in FT. The technology has become a staple in reconstructive surgery, signaling a step forward in the evolution of complex surgical interventions. Article published online: 27 May 2024 © 2024. Thieme. All rights reserved. Thieme Medical Publishers, Inc. 333 Seventh Avenue, 18th Floor, New York, NY 10001, USA

surgery
Digitalization in Cranial Reconstruction: Revolutionizing Precision and Innovation

Shruti Deshmukh,Sweta G Pisulkar,Surekha A Dubey,Arushi Beri,Akansha Bansod

DOI: https://doi.org/10.7759/cureus.60046

2024-05-10

Cureus

Abstract:Cranioplasty for cranial defects can be complex and challenging in composite defects. The intricate 3D structure of the craniofacial skeleton poses various difficulties encountered in surgical reconstruction. The continuous progress in computer-aided design and computer-aided manufacturing design, and fabrication technology has led to a growing array of applications for visual analog scale and 3D printing in craniofacial surgery, encompassing preoperative assessment, the creation of cutting guides, and the development of custom implants and stereolithographic models. Within this review, the authors detail the present and developing applications of virtual surgical planning, 3D bioprinting, augmented reality, and virtual reality in craniofacial reconstruction.
[Therapy of hyperuricemia in gout; physiological principles].

J. Frézal

Abstract:
A System for Mixed-Reality Holographic Overlays of Real-Time Rendered 3D-Reconstructed Imaging Using a Video Pass-through Head-Mounted Display—A Pathway to Future Navigation in Chest Wall Surgery

Jan Arensmeyer,Benedetta Bedetti,Philipp Schnorr,Jens Buermann,Donatas Zalepugas,Joachim Schmidt,Philipp Feodorovici

DOI: https://doi.org/10.3390/jcm13072080

IF: 3.9

2024-04-04

Journal of Clinical Medicine

Abstract:Background: Three-dimensional reconstructions of state-of-the-art high-resolution imaging are progressively being used more for preprocedural assessment in thoracic surgery. It is a promising tool that aims to improve patient-specific treatment planning, for example, for minimally invasive or robotic-assisted lung resections. Increasingly available mixed-reality hardware based on video pass-through technology enables the projection of image data as a hologram onto the patient. We describe the novel method of real-time 3D surgical planning in a mixed-reality setting by presenting three representative cases utilizing volume rendering. Materials: A mixed-reality system was set up using a high-performance workstation running a video pass-through-based head-mounted display. Image data from computer tomography were imported and volume-rendered in real-time to be customized through live editing. The image-based hologram was projected onto the patient, highlighting the regions of interest. Results: Three oncological cases were selected to explore the potentials of the mixed-reality system. Two of them presented large tumor masses in the thoracic cavity, while a third case presented an unclear lesion of the chest wall. We aligned real-time rendered 3D holographic image data onto the patient allowing us to investigate the relationship between anatomical structures and their respective body position. Conclusions: The exploration of holographic overlay has proven to be promising in improving preprocedural surgical planning, particularly for complex oncological tasks in the thoracic surgical field. Further studies on outcome-related surgical planning and navigation should therefore be conducted. Ongoing technological progress of extended reality hardware and intelligent software features will most likely enhance applicability and the range of use in surgical fields within the near future.

medicine, general & internal
3D Printing: current use in facial plastic and reconstructive surgery

Tsung-yen Hsieh,Raj Dedhia,Brian Cervenka,Travis T. Tollefson,Dedhia, Raj,Tollefson, Travis T.,Cervenka, Brian,Hsieh, Tsung-yen

DOI: https://doi.org/10.1097/MOO.0000000000000373

2019-10-03

Abstract:Purpose of review To review the use of three-dimensional (3D) printing in facial plastic and reconstructive surgery, with a focus on current uses in surgical training, surgical planning, clinical outcomes, and biomedical research. To evaluate the limitations and future implications of 3D printing in facial plastic and reconstructive surgery. Recent findings Studies reviewed demonstrated 3D printing applications in surgical planning including accurate anatomic biomodels, surgical cutting guides in reconstruction, and patient-specific implants fabrication. 3D printing technology also offers access to well tolerated, reproducible, and high-fidelity/patient-specific models for surgical training. Emerging research in 3D biomaterial printing have led to the development of biocompatible scaffolds with potential for tissue regeneration in reconstruction cases involving significant tissue absence or loss. Major limitations of utilizing 3D printing technology include time and cost, which may be offset by decreased operating times and collaboration between departments to diffuse in-house printing costs Summary The current state of the literature shows promising results, but has not yet been validated by large studies or randomized controlled trials. Ultimately, further research and advancements in 3D printing technology should be supported as there is potential to improve resident training, patient care, and surgical outcomes.

otorhinolaryngology
The Reconstructive Metaverse – Collaboration in Real-Time Shared Mixed Reality Environments for Microsurgical Reconstruction

Fabian N. Necker,David J. Cholok,Mohammed S. Shaheen,Marc J. Fischer,Kyle Gifford,Trishia El Chemaly,Christoph W. Leuze,Michael Scholz,Bruce L. Daniel,Arash Momeni

DOI: https://doi.org/10.1177/15533506241262946

2024-06-22

Surgical Innovation

Abstract:Surgical Innovation, Ahead of Print. Plastic surgeons routinely use 3D-models in their clinical practice, from 3D-photography and surface imaging to 3D-segmentations from radiological scans. However, these models continue to be viewed on flattened 2D screens that do not enable an intuitive understanding of 3D-relationships and cause challenges regarding collaboration with colleagues. The Metaverse has been proposed as a new age of applications building on modern Mixed Reality headset technology that allows remote collaboration on virtual 3D-models in a shared physical-virtual space in real-time. We demonstrate the first use of the Metaverse in the context of reconstructive surgery, focusing on preoperative planning discussions and trainee education. Using a HoloLens headset with the Microsoft Mesh application, we performed planning sessions for 4 DIEP-flaps in our reconstructive metaverse on virtual patient-models segmented from routine CT angiography. In these sessions, surgeons discuss perforator anatomy and perforator selection strategies whilst comprehensively assessing the respective models. We demonstrate the workflow for a one-on-one interaction between an attending surgeon and a trainee in a video featuring both viewpoints as seen through the headset. We believe the Metaverse will provide novel opportunities to use the 3D-models that are already created in everyday plastic surgery practice in a more collaborative, immersive, accessible, and educational manner.

surgery
T-cell phenotypes in mixed leukocyte reactions and after bone marrow transplantation: are Ia-antigen on T-cells a marker for GvH reactions?

K. Stünkel,C. Bender-Götze,B. Netzel,E. Thiel

DOI: https://doi.org/10.1007/978-3-642-68761-7_23

Abstract:
Updates in Head and Neck Reconstruction

Rene D Largo,Patrick B Garvey

DOI: https://doi.org/10.1097/PRS.0000000000004070

Abstract:Learning objectives: After reading this article, the participant should be able to: 1. Have a basic understanding of virtual planning, rapid prototype modeling, three-dimensional printing, and computer-assisted design and manufacture. 2. Understand the principles of combining virtual planning and vascular mapping. 3. Understand principles of flap choice and design in preoperative planning of free osteocutaneous flaps in mandible and midface reconstruction. 4. Discuss advantages and disadvantages of computer-assisted design and manufacture in reconstruction of advanced oncologic mandible and midface defects. Summary: Virtual planning and rapid prototype modeling are increasingly used in head and neck reconstruction with the aim of achieving superior surgical outcomes in functionally and aesthetically critical areas of the head and neck compared with conventional reconstruction. The reconstructive surgeon must be able to understand this rapidly-advancing technology, along with its advantages and disadvantages. There is no limit to the degree to which patient-specific data may be integrated into the virtual planning process. For example, vascular mapping can be incorporated into virtual planning of mandible or midface reconstruction. Representative mandible and midface cases are presented to illustrate the process of virtual planning. Although virtual planning has become helpful in head and neck reconstruction, its routine use may be limited by logistic challenges, increased acquisition costs, and limited flexibility for intraoperative modifications. Nevertheless, the authors believe that the superior functional and aesthetic results realized with virtual planning outweigh the limitations.
Three-Dimensional Virtual and Printed Prototypes in Complex Congenital and Pediatric Cardiac Surgery—A Multidisciplinary Team-Learning Experience

Laszlo Kiraly,Nishant C. Shah,Osama Abdullah,Oraib Al-Ketan,Reza Rowshan

DOI: https://doi.org/10.3390/biom11111703

IF: 6.064

2021-11-16

Biomolecules

Abstract:Three-dimensional (3D) virtual modeling and printing advances individualized medicine and surgery. In congenital cardiac surgery, 3D virtual models and printed prototypes offer advantages of better understanding of complex anatomy, hands-on preoperative surgical planning and emulation, and improved communication within the multidisciplinary team and to patients. We report our single center team-learning experience about the realization and validation of possible clinical benefits of 3D-printed models in surgical planning of complex congenital cardiac surgery. CT-angiography raw data were segmented into 3D-virtual models of the heart-great vessels. Prototypes were 3D-printed as rigid “blood-volume” and flexible “hollow”. The accuracy of the models was evaluated intraoperatively. Production steps were realized in the framework of a clinical/research partnership. We produced 3D prototypes of the heart-great vessels for 15 case scenarios (nine males, median age: 11 months) undergoing complex intracardiac repairs. Parity between 3D models and intraoperative structures was within 1 mm range. Models refined diagnostics in 13/15, provided new anatomic information in 9/15. As a team-learning experience, all complex staged redo-operations (13/15; Aristotle-score mean: 10.64 ± 1.95) were rehearsed on the 3D models preoperatively. 3D-printed prototypes significantly contributed to an improved/alternative operative plan on the surgical approach, modification of intracardiac repair in 13/15. No operative morbidity/mortality occurred. Our clinical/research partnership provided coverage for the extra time/labor and material/machinery not financed by insurance. 3D-printed models provided a team-learning experience and contributed to the safety of complex congenital cardiac surgeries. A clinical/research partnership may open avenues for bioprinting of patient-specific implants.

biochemistry & molecular biology
Application of Mixed Reality Technique for the Surgery of Oral and Maxillofacial Tumors

Z N Tang,Y Hui,L H Hu,Y Yu,W B Zhang,X Peng

DOI: https://doi.org/10.19723/j.issn.1671-167x.2020.06.023

2020-01-01

Abstract:OBJECTIVE:To explore the application of mixed reality technique for the surgery of oral and maxillofacial tumors. METHODS:In this study, patients with a diagnosis of an oral and maxillofacial tumor who were referred to Department of Oral and Maxillofacial Surgery, Peking University School and Hospital of Stomatology from December 2018 to January 2020 were selected. The preoperative contrast-enhanced computed tomography data of the patients were imported into StarAtlas Holographic Medical Imaging System (Visual 3D Corp., Beijing, China). Three-dimensional (3D) model of tumor and key structures, such as skeleton and vessels were reconstructed to three-dimensionally present the spatial relationship between them, followed with the key structures delineation and preoperative virtual surgical planning. By using mixed reality technique, the real-time 3D model was displayed stereotactically in the surgical site. While keeping sterile during operation, the surgeon could use simple gestures to adjust the 3D model, and observed the location, range, and size of tumor and the key structures adjacent to the tumor. Mixed reality technique was used to assist the operation: 3D model registration was performed for guidance before tumor excision; intraoperative real-time verification was performed during tumor exposure and after excision of the tumor. The Likert scale was used to evaluate the application of mixed reality technique after the operation. RESULTS:Eight patients underwent mixed reality assisted tumor resection, and all of them successfully completed the operation. The average time of the 3D model registration was 12.0 minutes. In all the cases, the surgeon could intuitively and three-dimensionally observe the 3D model of the tumor and the surrounding anatomical structures, and could adjust the model during the operation. The results of the Likert scale showed that mixed reality technique got high scores in terms of perceptual accuracy, helping to locate the anatomical parts, the role of model guidance during surgery, and the potential for improving surgical safety (4.22, 4.19, 4.16, and 4.28 points respectively). Eight patients healed well without perioperative complications. CONCLUSION:By providing real-time stereotactic visualization of anatomy of surgical site and guiding the operation process through 3D model, mixed reality technique could improve the accuracy and safety of the excision of oral and maxillofacial tumors.
Virtual Planning and 3D printing modeling for mandibular reconstruction with fibula free flap

Wenhao Ren,Ling Gao,Shaoming Li,Cheng Chen,Fan Li,Qibo Wang,Yuan Zhi,Jianzhong Song,Zhichao Dou,Lingfa Xue,Keqian Zhi,W Ren,L Gao,S Li,C Chen,F Li,Q Wang,Y Zhi,J Song,Z Dou,L Xue,K Zhi

DOI: https://doi.org/10.4317/medoral.22295

2018-01-01

Medicina Oral Patología Oral y Cirugia Bucal

Abstract:BACKGROUND: This study was to evaluate the use of virtual planning and 3D printing modeling in mandibular reconstruction and compare the operation time and surgical outcome of this technique with conventional method.MATERIAL AND METHODS: Between 2014 and 2017, 15 patients underwent vascularized fibula flap mandibular reconstruction using virtual planning and 3D printing modeling. Titanium plates were pre-bent using the models and cutting guides were used for osteotomies. 15 patients who underwent mandibular reconstruction using fibula flap without aid of virtual planning and 3D printing models were selected as control group. The operation time was recorded and compared in two groups. Accuracy of reconstruction was measured by superimposing the preoperative image onto the postoperative image of mandible. The selected bony landmark, distance and angle were measured.RESULTS: The mean total operation time and reconstruction time were 1.60±0.37 and 5.54±0.50 hours in computer-assisted group, respectively; These were 2.58±0.45 and 6.54±0.70 hours in conventional group, respectively. Both operation time and reconstruction time were shorter in computer-assisted group. The difference between the preoperative and postoperative intercondylar distances, intergonial angle distances, anteroposterior distances and gonial angles were 2.92±1.15 and 4.48±1.41mm, 2.93±1.19 and 4.79±1.48mm, 4.31±1.24 and 5.61±1.41mm, 3.85±1.68° and 5.88±2.12° in the computer-assisted and conventional group, respectively. The differences between the preoperative and postoperative mandible is smaller in the computer-assisted group.CONCLUSIONS: Virtual planning and 3D printing modeling have the potential to increase mandibular reconstruction accuracy and reduce operation time. we believe that this technology for mandibular reconstruction in selected patients will become a used method and improve the quality of reconstruction.
Chronic Paroxysmal Hemicrania (CPH): Nomenclature as Far as The Various Stages are Concerned

O. Sjaastad

DOI: https://doi.org/10.1046/j.1468-2982.1989.0901001.x

1989-03-01

Cephalalgia

Abstract:When the term "chronic paroxysmal hemicrania" (CPH) was coined, all three major characteristics of the headache were taken into consideration; this purely descriptive term did not allude to any etiological factors. In the headache cases that we examined at the time, the headache was chronic in the sense that attacks occurred every day. The attacks were clear-cut and short-lasting. The pain was not constant, hence the term paroxysmal, the pain was hemicranial (1).
Advances in Three-Dimensional Printing for Craniomaxillofacial Trauma Reconstruction: A Systematic Review

Mendy Hatibie Oley,Maximillian Christian Oley,Vania Sukarno,Muhammad Faruk

DOI: https://doi.org/10.1097/scs.0000000000010451

2024-07-03

Journal of Craniofacial Surgery

Abstract:Craniomaxillofacial (CMF) fractures present significant challenges for plastic surgeons due to their intricate nature. Conventional methods such as autologous bone grafts have limitations, necessitating advancements in reconstructive surgery techniques. This study reviewed the use of three-dimensional printing for CMF trauma reconstruction using human studies. A systematic search of PubMed, EMBASE, and Google Scholar was conducted in February 2024 for case reports, case series, and clinical trials related to CMF trauma reconstruction using three-dimensional printing technology. The authors’ systematic review included 20 studies and a total of 170 participants with CMF bone defects. In general, the authors observed low bias risk in analyzed case reports and series, serious bias risk in nonrandomized controlled trials, and moderate bias risk in randomized controlled trials. The printed objects included CMF structure model prototypes, patient-specific implants, and other custom surgical devices. Studies reveal successful outcomes, including restored facial symmetry and function, restored orbital occlusion, resolved enophthalmos and diplopia, achieved cosmetically symmetrical lower face reconstruction, and precise fitting of surgical devices, enhancing patient and surgeon comfort. However, complications such as local infection, implant exposure, and persistent diplopia were reported. Three-dimensional printed devices reduced surgery time but increased preparation time and production costs. In-house production options could mitigate these time and cost expenditures. Three-dimensional printing holds potential in CMF trauma reconstruction, addressing both functional and esthetic restoration. Nevertheless, challenges persist in implementing this advanced technology in resource-limited environments.

surgery
Neuroplastic Surgery Principles of Computerized Surgical Planning in Complex Cranioplasty Reconstruction

Colleen F. Perez,Chad R. Gordon

DOI: https://doi.org/10.1055/s-0044-1786759

2024-05-24

Seminars in Plastic Surgery

Abstract:This article explores the evolution and implementation of three-dimensional (3D) models and Computerized Surgical Planning (CSP) for complex cranioplasty reconstruction and the advances in neuroplastic surgery principles for improved surgical outcomes. Over recent years, CSP has revolutionized the field by employing detailed medical imaging to enhance the accuracy and efficacy of 3D models and for the creation of customized cranial implants (CCIs). The study discusses the advancements of solid alloplastic implants to the future of implants with sophisticated and integrated neurotechnology to treat or enhance patient outcomes. CSP can be used to identify and mitigate complications that can occur within cranioplasty reconstruction and to create CCIs to address the postoperative challenge of temporal hollowing. Despite the promising advancements, the article acknowledges the current limitations of CSP, including cost and technological accessibility, and proposes future directions for research and development. The findings suggest that with further improvements in imaging, biomaterials, and manufacturing techniques, CSP in neuroplastic surgery and other specialties will continue to significantly enhance the precision and personalized care of cranioplasty reconstruction. Article published online: 23 May 2024 © 2024. Thieme. All rights reserved. Thieme Medical Publishers, Inc. 333 Seventh Avenue, 18th Floor, New York, NY 10001, USA

surgery
CBF adaption in man to chronic hypo- and hypercapnia and its relation to CSF pH.

E. Skinhøj

DOI: https://doi.org/10.3109/00365516809169006

Abstract:

The thermal unfolding of ribonuclease A. A 13C NMR study.

Virtual And Medical Prototype Assisted Craniofacial Reconstructive Surgery

Virtual Surgical Planning and Pre-operative Simulation for Maxillofacial Reconstruction with 3D Printing Technology in Tumor-affected Facial Deformity

Cinematic Rendering in Mixed-Reality Holograms: A New 3D Preoperative Planning Tool in Pediatric Heart Surgery

THE APPLICATION OF RAPID PROTOTYPING IN THE ORTHOGNATHIC SURGERY

Craniomaxillofacial Surgery with Computer-generated Three-dimensional Solid Models

Computerized Surgical Planning in Face Transplantation

Digitalization in Cranial Reconstruction: Revolutionizing Precision and Innovation

[Therapy of hyperuricemia in gout; physiological principles].

A System for Mixed-Reality Holographic Overlays of Real-Time Rendered 3D-Reconstructed Imaging Using a Video Pass-through Head-Mounted Display—A Pathway to Future Navigation in Chest Wall Surgery

3D Printing: current use in facial plastic and reconstructive surgery

The Reconstructive Metaverse – Collaboration in Real-Time Shared Mixed Reality Environments for Microsurgical Reconstruction

T-cell phenotypes in mixed leukocyte reactions and after bone marrow transplantation: are Ia-antigen on T-cells a marker for GvH reactions?

Updates in Head and Neck Reconstruction

Three-Dimensional Virtual and Printed Prototypes in Complex Congenital and Pediatric Cardiac Surgery—A Multidisciplinary Team-Learning Experience

Application of Mixed Reality Technique for the Surgery of Oral and Maxillofacial Tumors

Virtual Planning and 3D printing modeling for mandibular reconstruction with fibula free flap

Chronic Paroxysmal Hemicrania (CPH): Nomenclature as Far as The Various Stages are Concerned

Advances in Three-Dimensional Printing for Craniomaxillofacial Trauma Reconstruction: A Systematic Review

Neuroplastic Surgery Principles of Computerized Surgical Planning in Complex Cranioplasty Reconstruction

CBF adaption in man to chronic hypo- and hypercapnia and its relation to CSF pH.