Abstract:Textile-based wearable electronics, integrating the functions of electronics into the daily textiles, offers a comfortable interaction between humans and electronic devices. Production of highly conductive and environmentally stable textiles is the precondition for the ultimate wearable electronic system. However, due to the complicated porous structure, it is still technically challenging to endow textiles with desirable conductivity and stability, especially in the case of stretchable fabrics. Herein, we report a facile but effective fabrication strategy combining the electroless deposition and electrodeposition techniques for the metallization of stretchable knitted fabrics. The electroless deposition process first introduces a thin metal layer and yields electrically conductive fabrics. The subsequent electrodeposited metals conformally coat on individual fibers of fabrics, which significantly improves the electrical conductivity, mechanical durability, and environmental stability of metallized textiles. Remarkably, the sheet resistance of metallized textiles reaches less than 0.02 Ω sq<sup>–1</sup> and remains relatively stable under more than 400% tensile strain. More importantly, the metallized stretchable fabrics exhibit superior stability when monitored in varied environments for 30 days, further promoting their practical uses in wearable electronics. Finally, a wearable heater and a strain sensor are demonstrated to show potential applications of metallized textiles for personal healthcare and human motion monitoring.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaelm.1c00088?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaelm.1c00088</a>.Schematic illustration of polymer-assisted electroless deposition (Figure S1), XRD characterization of pristine textile and metallized textiles (Figure S2), mechanical properties of metallized textiles (Figure S3), energy-dispersive X-ray spectroscopy (EDS) analysis of the metallized textile (Figure S4), the normalized change in resistance of metallized textile as a function of the strain (Figure S5), morphologies of metallized textile after break (Figure S6), morphologies of metallized textiles after cyclic stretching–releasing tests (Figure S7), optical microscopic images of metallized textiles before and after environmental stability tests (Figure S8), and the summary of the mechanical and electrical properties of pristine spandex fabric and various metallized spandex fabrics (Table S1) (<a class="ext-link" href="/doi/suppl/10.1021/acsaelm.1c00088/suppl_file/el1c00088_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Tunable Color Coating of E-Textiles by Atomic Layer Deposition of Multilayer TiO2/Al2O3 Films

Smart Color-Changing Textile With High Contrast Based On A Single-Sided Conductive Fabric

IntelliTex: Fabricating Low-cost and Washable Functional Textiles Using A Double-coating Process

Colorful Conductive Threads for Wearable Electronics: Transparent Cu–Ag Nanonets

Continuous dry-wet spinning of white, stretchable, and conductive fibers of poly(3-hydroxybutyrate-<i>co</i>-4-hydroxybutyrate) and ATO@TiO<sub>2</sub> nanoparticles for wearable e-textiles

Liquid Metal Coated Textiles with Autonomous Electrical Healing and Antibacterial Properties

Exploration of Stimuli‐Responsive, Elastin‐Based Coatings for Textiles

Multicolor electrochromic fabric with a simple structure of PEDOT:PSS/DMSO

Bioinspired Polydopamine Modification for Interface Compatibility of PDMS-Based Responsive Structurally Colored Textiles

Direct screen printing of single-faced conductive cotton fabrics for strain sensing, electrical heating and color changing

Metallic coloration and multifunctional preparation on fabrics via nitriding reactive sputtering with copper and titanium targets

A Green Electrically Conductive Textile with Tunable Piezoresistivity and Transiency

Elaboration of a Conductive Textile by Coating for Clothes Equipped with Fourth-Generation Photovoltaic Cells

Electrothermochromic Fabrics with a Single-Layer Functional Coating Based on Silver Nanowires/Thermochromic Microcapsules/Waterborne Polyurethane Paints

Textile Resistance Switching Memory for Fabric Electronics

Rapid Copper Metallization of Textile Materials: a Controlled Two-Step Route to Achieve User-Defined Patterns under Ambient Conditions.

Fabrication of Multifunctional Electronic Textiles Using Oxidative Restructuring of Copper into a Cu-Based Metal–Organic Framework

Enhanced Coloration Time of Electrochromic Device Using Integrated WO3@PEO Electrodes for Wearable Devices

A Review of Electro Conductive Textiles Utilizing the Dip-Coating Technique: Their Functionality, Durability and Sustainability

“Drop-on-textile” patternable aqueous PEDOT composite ink providing highly stretchable and wash-resistant electrodes for electronic textiles

Environmentally Stable, Highly Conductive, and Mechanically Robust Metallized Textiles