Abstract:The objective of the study is to examine the Coats-Redfern approximation and to propose an innovative kinetic calculation method for the complex process of the heavy tar thermal decomposition under non-isothermal process. The thermal decomposition process was examined using the thermogravimetric analysis. There are several kinetic models proposed to analyze pyrolysis mechanism in terms of the formal reaction. In this manner, the kinetic parameters of the pyrolysis process can be evaluated based on total mass loss (thermogravimetric analysis –TGA). The TGA procedures can be conducted with isothermal or non-isothermal conditions, but the experimental data obtained according to this procedure have to be transformed into appropriate correlation. The obtained results have shown that the reaction takes place within temperature range of 540 K to 700 K and the inductive period of the process is about 224 min. Kinetic parameters were estimated with using of the conventional Coats-Redfern method. A new kinetic calculation method has been designed to provide a less laboriousness of identifications procedures compared with Coats-Redfern approximation and to take into account an induction time of the process. As the outcome of this study, it was shown that the kinetic parameters estimated with using of the proposed model-fitted method gives the more appropriate correlation in comparison with the conventional Coats-Redfern method. The proposed method uses the Coats-Redfern algorithm for evaluation of the reaction mechanism, but the value of the constant rate is defined directly from experimental data on the conversion rate.

Pressure-identification method in adiabatic calorimetry: Determining decomposition mechanism model from initial conversion based on experimental pressure data

Kinetic-parameters-free method of determining autocatalytic decomposition from experimental adiabatic data

Adiabatic compression heating of selected organic solvents under high pressure processing

Investigation of temperature gradient effects and effective thermal inertia during adiabatic decomposition of substances with varying exothermic characteristics

Assessing an Experimental Approach for Chemical Explosive Mode and Heat Release Rate Using DNS Data

A Power-Modulated Accelerating Rate Calorimetry for Varying Heat Capacity Measurement During Thermal Decomposition

Experimental Analysis of Intrinsic Kinetics and Rate Profiles for Coal Char Conversion under Different Atmospheres

Risk evaluation on the basis of pressure rate measured by automatic pressure tracking adiabatic calorimeter

Numerical Simulation of the Thermal Decomposition of Tert-Butyl Peroxyacetate in Adiabatic Tests

Runaway reaction investigation of di-tert-butyl peroxide using adiabatic calorimetry

Numerical Simulation of the Thermal Inertia of an Adiabatic Reaction Calorimeter in Reaction Thermal Safety Process

Investigative calorimetric studies and kinetic parameters estimation using analytical methods for self-reactive hazardous chemicals in a chemical manufacturing plant

Numerical and Experimental Studies on Decomposition and Vent of Di-Tertbutyl Peroxide in Pressure Vessel

Experimental sensitivity analysis of the runaway severity of Dicumyl peroxide decomposition using adiabatic calorimetry

Model-Free Kinetic Determination Of Pre-Exponential Factor And Reaction Mechanism In Accelerating Rate Calorimetry

Effect of reaction type on TMRad, TD24 and other data obtained by adiabatic calorimetry

A green approach towards adoption of chemical reaction model on 2,5-dimethyl-2,5-di-(tert-butylperoxy)hexane decomposition by differential isoconversional kinetic analysis

Heat Dissipation Analysis and Correction of the Sample in Accelerating Rate Calorimetric Experiment

AN INNOVATE METHOD OF THERMOGRAVIMETRIC DATA ANALYSIS

Method and automatic program for accurate thermodynamic data of reaction mechanisms for combustion modeling