Abstract:Predicting the dramatic changes in material properties caused by irradiation damage is key for the design of future nuclear fission and fusion reactors. Self-ion implantation is an attractive tool for mimicking the effects of neutron irradiation. However, the damaged layer of implanted samples is only few microns thick, making it difficult to estimate macroscopic properties. Here we address this challenge using a combination of experimental and modelling techniques. We concentrate on self-ion-implanted tungsten, the front-runner for fusion armour components and a prototypical bcc material. To capture dose-dependent evolution of properties, we experimentally characterise samples with damage levels from 0.01 to 1 dpa. Spherical nano-indentation of <001> grains shows hardness increasing up to a dose of 0.032 dpa, beyond which it saturates. AFM measurements show pile-up increasing up to the same dose, beyond which large pile-up and slip-steps are seen. Based on the observations we develop a crystal plasticity (CPFE) model for the irradiated material. It captures irradiation-induced hardening followed by strain-softening through interaction of irradiation-defects and gliding dislocations. Shear resistance of irradiation-defects is derived from TEM observations of similarly irradiated samples. Nano-indentation of pristine and implanted tungsten of doses 0.01, 0.1, 0.32 and 1 dpa is simulated. Two model parameters are fitted to the experimental results of the 0.01 dpa sample and are kept unchanged for all other doses. Peak load, indent surface profiles and damage saturation predicted by the CPFE model closely match experimental observations. Predicted lattice distortions and dislocation distributions around indents agree with corresponding measurements from HR-EBSD. Finally, the CPFE model is used to predict the macroscopic stress-strain response of similarly irradiated bulk tungsten material.

A model to evaluate the radiation-hardening in shallow ion-irradiated metallic materials

A Mechanistic Model for Depth-Dependent Hardness of Ion Irradiated Metals

Model for the hardness-depth relationships of ion-irradiated nanocrystalline metals

Nanoindentation Test of Ion-Irradiated Materials: Issues, Modeling and Challenges

Size dependence of micro-scale mechanical properties on heavy-ion irradiated tempered-martensitic steel evaluated through nanoindentation and micropillar compression tests

Modelling Nano-Indentation of Ion-Irradiated FCC Single Crystals by Strain-Gradient Crystal Plasticity Theory

Revealing the Temperature-Dependent Hardening Mechanisms of Non-Uniformly Distributed Defects for Ion-Irradiated Metals: Experiments and Modeling

Model of Nanoindentation Size Effect Incorporating the Role of Elastic Deformation

A Statistical Model of Irradiation Hardening Induced by Non-Periodic Irradiation Defects

Irradiation-Hardening Model of TiZrHfNbMo0.1 Refractory High-Entropy Alloys

Simulation of the Irradiation Effect on Hardness of Chinese HTGR A508-3 Steels with CPFEM

Microstructure-Informed Prediction of Hardening in Ion-Irradiated Reactor Pressure Vessel Steels

Modified deformation behaviour of self-ion irradiated tungsten: A combined nano-indentation, HR-EBSD and crystal plasticity study

A Nano-Indentation Model for Spherical Indenters

Quantitative Study of Roughness Effect in Nanoindentation on AISI316L Based on Simulation and Experiment

Study on Irradiation Effect in Stress-Strain Response with CPFEM During Nano-Indentation

Mechanical properties of 6H-SiC irradiated by neutron and MeV heavy ions: A nanoindentation and finite element method study

Effect of Ion Irradiation on Nanoindentation Fracture and Deformation in Silicon Carbide

Atomic Irradiation Defects Induced Hardening Model in Irradiated Tungsten Based on Molecular Dynamics and CPFEM

Nanoindentation Response of Ion-Irradiated Fe, Fe-Cr Alloys and Ferritic-Martensitic Steel Eurofer 97: The Effect of Ion Energy

Indenter Tip Radius Effect on the Nix–Gao Relation in Micro- and Nanoindentation Hardness Experiments