Abstract:The lamellae deformation and cavitation behavior of annealed isotactic polypropylene during uniaxial stretching are comprehensively investigated by in situ synchrotron small-angle X-ray scattering and wide-angle X-ray scattering. We reveal how lamellae deformation occurs in the time scales of elastic deformation, intralamellar slip, and melting-recrystallization, separated by three critical strains which are only rarely influenced by annealing. Strain I (0.1) marks the end of elastic deformation and the onset of intralamellar slip, beyond which the crystallinity decreases gradually. Strain II (0.45) signifies the start of the recrystallization process, from where the long period in the stretching direction begins to decrease from its maximum and the polymer chains in the crystal start to orient along the stretching direction. The energy required for melting arises from the friction between the fragmented lamellae produced by intralamellar slip. Strain III (0.95) denotes the end of the recrystallization process. Beyond the strain of 0.95, the long period and the crystal size remain nearly unchanged. During further stretching, the newly formed lamellae serve as the anchoring points for polymer chains in the amorphous phase. The extension of the polymer chains in between lamellae triggers the strain hardening behavior. On the other hand, annealing significantly decreases the critical strain for voids formation and increases the voids number but restricts the void size. For those samples annealed at a temperature lower than 90 degrees C, voids are formed between strain II and strain III, and voids are oriented in the stretching direction once they are formed. However, for those samples annealed at a temperature higher than 105 degrees C, voids are formed between strain I and strain II. In this case, voids are initially oriented with their longitudinal axis perpendicular to the stretching direction and then transferred along stretching direction via void coalescence. Additionally, the formation of voids influences neither the critical strains for lamellae deformation nor the final long period, the orientation of polymer chains, or the crystal size. The final long period, the orientation of polymer chains in the crystal, and the crystal size are determined only by the stretching temperature through melting-recrystallization.

Temperature dependent large strain cavitation in ultra high molecular weight polyethylene during tensile deformation

Effect of αc-relaxation on the large strain cavitation in polyethylene

Aging-dependent Strain Localization in Amorphous Glassy Polymers: from Necking to Shear Banding

Thermomechanical Coupling in Glassy Polymers: an Effective Temperature Theory

A Constitutive Model for Strain Hardening Behavior of Predeformed Amorphous Polymers: Incorporating Dissipative Dynamics of Molecular Orientation

The breakage of original crystallites determined small strain cavitation in syndiotactic polypropylene during step-cycle tensile deformation

Molecular dynamics simulation of plastic deformation in polyethylene under uniaxial and biaxial tension

Molecular dynamics study of axial tensile response of crystalline ultra-high molecular weight polyethylene under different loading conditions

Effect of deformation ratio of flow-induced crystallization on polyethylene in crystalline behavior, thermal stability, and tensile loading: a molecular dynamics simulation

Reversed thermal stability between stress-induced melting and recrystallized crystallites and original inclined ones in moderately stretched ultra high molecular weight polyethylene and high density polyethylene

Molecular Weight and Distribution Dependent Critical Stress of Fragmentation of Highly Oriented Amorphous Network in Stretched Isotactic Polypropylene

Evolution of the cavity structure of HDPE/UHMWPE blends during cold stretching

Temperature dependency of cavitation in impact copolymer polypropylene during stretching

Structure/property relationship of semi-crystalline polymer during tensile deformation: A molecular dynamics approach

Time–temperature Correlations of Amorphous Thermoplastics at Large Strains Based on Molecular Dynamics Simulations

Lamellar thickness and stretching temperature dependency of cavitation in semicrystalline polymers

Application of an interpenetrating network model to the solid deformation of a quenched isotactic polypropylene film

Critical Strains for Lamellae Deformation and Cavitation During Uniaxial Stretching of Annealed Isotactic Polypropylene

Molecular Orientations and True Stress−Strain Relationship in Isotactic Polypropylene Film

Segmental Orientations and Deformation Mechanism of Poly(Ether-Block-Amide) Films

Influence of ensemble boundary conditions (thermostat and barostat) on the deformation of amorphous polyethylene by molecular dynamics