Abstract:To rationalize the relatively high investment that industrial automation systems entail, research in the field of intelligent machines should target high value functions such as fettling, die-finishing, deburring, and fixtureless manufacturing. For achieving this goal, past work has concentrated on force control algorithms at the system level with limited focus on performance expansion at the actuator level. We present a comprehensive literature review on robot force control, including algorithms, specialized actuators, and robot control software. A robot force control testbed was developed using Schunk's PowerCube 6-DOF Arm and a six-axis ATI force/torque sensor. Using parameter identification experiments, manipulator module inertias and the motor torque constant were estimated. Experiments were conducted to study the practical issues involved in implementing stable contact transitions and programmable endpoint impedance. Applications to human augmentation, virtual fixtures, and teleoperation are discussed. These experiments are used as a vehicle to understand the performance improvement achievable at the actuator level. The approach at UTRRG has been to maximize the choices within the actuator to enhance its intelligence. Drawing on this 20-year research history in electromechanical actuator architecture, we propose a new concept that mixes two inputs, distinct in their velocity ratios, within the same dual actuator called a Force/Motion Actuator (FMA). Detailed kinematic and dynamic models of this dual actuator are developed. The actuator performance is evaluated using simulations with an output velocity specification and resolving input trajectories using a minimum-norm solution. It is shown that a design choice of 14:1 motion scaling between the two inputs results in good sensitivity to output force disturbances without compromising velocity tracking performance.

Controller Design of Indirect Force Control System with Velocity-Saturating Closed Loop Ultrasonic Motor Velocity Control System in Inner Loop

Optimal and Intelligent Motion Control Scheme for an Ultrasonic-Motor-Driven X-Y Stage

Robust Force Tracking Impedance Control of an Ultrasonic Motor-actuated End-effector in a Soft Environment.

Harmonic and Synchronous Compound Control of a Dual-Valve Controlled Single-Rod Electro-Hydraulic Actuator.

Sliding Mode Based Controller for Magnetostrictive Actuator

Hybrid Motion/Force Control of the Hydraulic Cooperative Manipulator in Constrained Motion

Force Control Using Internal Spring in Electrostatic Linear Motors and Switching Between Position and Force Control

Fuzzy-neuron Network Control Techniques Applied to a Robot Driven Directly by Ultrasonic Motors

-Synthesis-Based Adaptive Robust Control of Linear Motor Driven Stages With High-Frequency Dynamics: A Case Study

Adaptive PID Saturate Output Feedback Control of Robot Manipulators

Mechanism Development and Pulse-Width Modulation Advanced Controller Design of Low Torque Manipulator

Preliminary Studies on Force/Motion Control of Intelligent Mechanical Systems

Robust Visual Feedback Control for Precise In-Hand Manipulation Using Parallel Soft Actuators

Design and Hybrid Control of the Pneumatic Force-Feedback Systems for Arm-Exoskeleton by Using On/off Valve

Dynamic Hybrid Velocity/force Control of Robot Compliant Motion over Globally Unknown Objects.

Adaptive Force Controller for Contact-Rich Robotic Systems using an Unscented Kalman Filter

Fuzzy-Sliding Mode Control for Humanoid Arm Robots Actuated by Pneumatic Artificial Muscles With Unidirectional Inputs, Saturations, and Dead Zones

Synthesis Methods and Experiment Validation of Compliant Force Controller Based Inner Position Loop.

Design and Implementation of Electromagnetic Active Control Actuators

A Globally Stable High-Performance Adaptive Robust Control Algorithm with Input Saturation for Precision Motion Control of Linear Motor Drive Systems

Modeling and Control Design for an Inlet Metering Valve-Controlled Pump Used to Control Actuator Velocity Via H-Infinity and Two-Degrees-of-Freedom Methods