Abstract:Displacement-controlled systems have high efficiency and are widely used in industry. Accurate control of the actuator motion in hydraulic systems is usually a necessity in industrial applications such as the motion of control surfaces in fixed-wing airplanes for flight control as well as the aircraft brake systems. To address this need, the current study was conducted with the goal of developing a high-fidelity model to achieve precise control. This work focused on modeling a hydrostatic transmission that is used for controlling a linear actuator velocity. The flow entering the actuator was changed using a variable displacement pump. The study included examining the stability and performance of the open-loop system. Additionally, the study involved the design of the proportional-integral-derivative PID and H∞ controllers, followed by the analysis of the stability and performance of the closed-loop system with both controllers. Furthermore, the multiplicative uncertainty is taken into account and the robustness of the system is verified using controllers PID and H∞. In the current study,Uncertain parameters such as actuator efficiency, pump speed, and viscous friction coefficient were considered and allowed for a ±5% deviation from their stated values. Taking uncertainty into account ensures that the system performs properly even in case where the design parameters vary within the specified range. The system response is compared for the cases of open-loop system, closed-loop system with PID controller, and closed-loop system with H∞ controller. The results demonstrated that the open-loop system remains stable for real-world applications but shows insufficient performance in terms of input tracking and disturbance rejection. The introduction of the PID controller significantly enhanced the system's response to a reference input; however, its disturbance rejection capabilities in terms of overshoot and settling time were still unsatisfactory. The system equipped with the PID controller failed to meet the robustness requirements. Conversely, the utilization of H∞ controllers yielded superior responses and fulfilled the robustness criteria.

Modeling and Control Design for an Inlet Metering Valve-Controlled Pump Used to Control Actuator Velocity Via H-Infinity and Two-Degrees-of-Freedom Methods

Parallel Velocity Control of an Electro-Hydraulic Actuator with Dual Disturbance Observers

Design of uncertain displacement controlled velocity control system for hydraulic actuator

Design, Modeling, and Pressure Control of a 300-Kw-class Hydraulic Pump/motor Loading System with Energy Regeneration

Modeling of a pneumatic system for high-accuracy position control

A new control design and robustness analysis of a variable speed hydrostatic transmission used to control the velocity of a hydraulic cylinder

Adaptive Robust Control Of Variable Displacement Pumps

Velocity-tracking Control of the Variable-speed Controlled Hydraulic System: Using Compound Algorithm of PD & Feedforward-feedback Control

Designing an Improved Controller for a Pump Direct Driven Electro-Hydraulic System Using a Nonlinear Flow Mapping

Nonlinear Supply Pressure Control for a Variable Displacement Axial Piston Pump

Harmonic and Synchronous Compound Control of a Dual-Valve Controlled Single-Rod Electro-Hydraulic Actuator.

Accurate Motion Control of a Direct-Drive Hydraulic System with an Adaptive Nonlinear Pump Flow Compensation

Precision Motion Control of a Servomotor-Pump Direct-Drive Electrohydraulic System With a Nonlinear Pump Flow Mapping

High Precision Energy Saving Motion Control Of Hydraulic Cylinder Based On Integration Of Valves And Pump

Motion Control of an Independent Metering System With Polynomial Approximations for Valve Flow Nonlinearity

Research on dynamic performance of independent metering valve-cylinder system based on double pressure compound control

Precision Motion Control of Separate Meter-In and Separate Meter-Out Hydraulic Swing System with State Constraints

Advanced Valves and Pump Coordinated Hydraulic Control Design to Simultaneously Achieve High Accuracy and High Efficiency.

Pump/valves coordinate control of the independent metering system for mobile machinery

Precision Motion Control of an Independent Metering Hydraulic System with Nonlinear Flow Modeling and Compensation

An Adaptive Robust Controller for Hydraulic Robotic Manipulators with a Flow-Mapping Compensator