Abstract:Different from traditional D-pi-A sensitizers (the traditional design concept of the organic dyes is the donor-pi-linker-acceptor structure), a series of organic dyes with pyridinium as acceptor have been synthesized in order to approach the optimal energy level composition in the TiO2-dye-iodide/triiodide system in the dye-sensitized solar cells. HOMO and LUMO energy level tuning is achieved by varying the conjugation units and the donating ability of the donor part. Detailed investigation on the relationship between the dye structure and photophysical, photoelectrochemical properties and performance of DSSCs is described. For TPA-based dyes, by substituting the 3-hexylthiophene group with a carbon-carbon double bond as pi-spacer, the bathochromic shift of absorption spectra and higher current density (J(sc)) are achieved. When the methoxyl and n-hexoxyl are introduced into CM301 to construct dyes CM302 and CM303, the absorption peak is red-shifted compared with that of CM301 due to the increase of the electron-donating ability. The devices fabricated with sensitizers CM302 and CM303 show higher J(sc) and open-circuit voltage (V-oc) than those of the device sensitized by CM301, which can be mainly attributed to the wider incident photon-to-current conversion efficiency (IPCE) response and the suppression of electron recombination between TiO2 film and electrolyte, respectively. The effects of different electron donors in DSSCs application are compared, and the results show that sensitizers with a phenothiazine (PTZ) electron-donating unit give a promising efficiency, which is even better than the TPA-based dyes. This is because the PTZ unit displayed a stronger electron-donating ability than the TPA unit (oxidation potential of 0.82 and 1.08 V vs the normal hydrogen electrode (NHE), respectively). For sensitizers CM306 and CM307, the introduction of 1,3- bis(hexyloxy)phenyl increases the donating ability of the donor part. Furthermore, the presence of long alkyl chains decreases the dye adsorption amount on the TiO2 surface, which diminishes dye aggregation and the electron recombination effectively, though, with less adsorption amount of dyes on TiO2, the device sensitized by dye CM307 obtained the best conversion efficiency of 7.1% (J(sc) = 13.6 mA.cm(-2), V-oc = 710 mV, FF = 73.6%) under AM 1.5G irradiation (100 mW.cm(-2)).

Fine tuning of the photovoltaic properties of triarylethylene-bridged dyes by altering the position and proportion of phenyl/thienyl groups

Effect of triphenylethylene analogues on the performance of carbazole-based dye-sensitized solar cells

The Improved Photovoltaic Performance of Phenothiazine-Dithienopyrrole Based Dyes with Auxiliary Acceptors

Tetraphenylethylene-bridged double-branched sensitizers featuring hetero-donors for dye-sensitized solar cells

Synthesis of Phenothiazine Dyes Featuring Benzothiadiazole Unit for Efficient Dye-sensitized Solar Cells

Triphenylamine dyes bearing 5-phenyl-2-(arylthiophen-2-yl)thiazole bridge for dye sensitized solar cells

Y-shaped dyes based on triphenylamine for efficient dye-sensitized solar cells

Effects Of Various Pi-Conjugated Spacers In Thiadiazole[3,4-C]Pyridine-Cored Panchromatic Organic Dyes For Dye-Sensitized Solar Cells

Molecular Engineering of Simple Phenothiazine-Based Dyes to Modulate Dye Aggregation, Charge Recombination, and Dye Regeneration in Highly Efficient Dye-Sensitized Solar Cells

Introducing thiophene and benzothiadiazole groups in triphenylamine-based organic dyes with rigidly fused π-bridge to design high-efficiency solar cells: A theoretical investigation

Tuning the Homo and Lumo Energy Levels of Organic Dyes with N-Carboxomethylpyridinium As Acceptor to Optimize the Efficiency of Dye-Sensitized Solar Cells

Influence of Different Molecular Design Strategies on Photovoltaic Properties of a Series of Triphenylamine-Based Organic Dyes for Dye-Sensitized Solar Cells: Insights from Theoretical Investigations

Fine-Tuning by Triple Bond of Carbazole Derivative Dyes to Obtain High Efficiency for Dye-Sensitized Solar Cells with Copper Electrolyte

Insight into the effects of modifying π-bridges on the performance of dye-sensitized solar cells containing triphenylamine dyes.

Synthesis and photovoltaic properties of new [1,2,5]thiadiazolo[3,4-c]pyridine-based organic Broadly absorbing sensitizers for dye-sensitized solar cells

Effect of triptycene unit on the performance of porphyrin-based dye-sensitized solar cells

D-π-A Conjugated Polymer Dyes-Covered TiO2 Compact Layers for Enhancing Photovoltaic Performance of Dye-Sensitized Solar Cells

Influence of Spatial Arrangements of Π-Spacer and Acceptor of Phenothiazine Based Dyes on the Performance of Dye-Sensitized Solar Cells

Effect of Molecular Structure Perturbations on the Performance of the D–A−π–A Dye Sensitized Solar Cells

New Simple Panchromatic Dyes Based on Thiadiazolo[3,4-C]pyridine Unit for Dye-Sensitized Solar Cells

Enhanced performance of dye-sensitized solar cells with Y-shaped organic dyes containing di-anchoring groups