Proton microscopy and microanalysis--biological applications.

G. Legge,P. M. O'brien,B. Kirby,G. Allan

DOI: https://doi.org/10.1016/0304-3991(88)90316-6

IF: 2.994

Ultramicroscopy

Abstract:

What problem does this paper attempt to address?

Robust Superhydrophobic Bilayer Coating: Long-term Anti-Corrosion and Anti-Fouling Resistance Enabled by POSS Star Cross-Linking and Fluoride-Modified SiO2 Nanoparticles Specific Synergies

Lijian Liu,Haihua Wang,Xixi Hao,Qinghua Zhang,Guiqiang Fei,Yihao Duan,Liyu Sun

DOI: https://doi.org/10.1016/j.porgcoat.2024.108919

IF: 6.6

2025-01-01

Progress in Organic Coatings

Abstract:Durable superhydrophobic coating has become frequently investigated and reported, however, achieving concurrent mechanical robustness, long-term anti-corrosive and anti-fouling functionalities remains a formidable challenge. In this study, a polymer nanocomposite coating was created through the star crosslinking of polyhedral oligomeric silsesquioxane (POSS) and fluorinated polyimide (FPI) prepolymer. Subsequently, a superhydrophobic bilayer was created by using the aforementioned coating as base coating, hydrophobic polyolefin (POA) with high toughness and strong adhesive was selected to binder fluoride-modified SiO2 nanoparticles (F-SiO2) to construct robust superhydrophobic topcoat and simultaneously enhance the interfacial bonding between topcoat and base coating. Notably, the bilayer superhydrophobic coating exhibited robust mechanical durability, retaining its superhydrophobicity even after 100 cycles of sandpaper friction and 80 cycles of tape peeling. After a 50-day salt spray test, the superhydrophobic FPI/POSS@POA/F-SiO2 bilayer coating demonstrated exemplary corrosion resistance, the low frequency impedance modulus (|Z|0.01Hz) was still as high as 7.04 × 1010 Ω·cm2, which is one order of magnitude higher than that of FPI/POSS-4 coating (3.17 × 109 Ω·cm2) and three orders of magnitude higher than pure FPI coating (1.82 × 107 Ω·cm2). In addition, the superhydrophobic coating also demonstrated self-cleaning and anti-fouling properties. The enhanced comprehensive performance for the superhydrophobic FPI/POSS@POA/F-SiO2 bilayer coating can be ascribed to the improved compactness and physical barrier resulted from the POSS star crosslinking, as well as the strong inhibitory effect endowed by the robust superhydrophobic surface. This study offers a fresh perspective on the preparation of superhydrophobic bilayer coatings with outstanding long-term anti-corrosive and anti-fouling attributes, showcasing their potential and prospective practical applications.
Long-term Can-Sealing Protection: a Stable Black Phosphorus Nanoassembly Achieved Through Heterogeneous Hydrophobic Functionalization.

Ying-Hao Pai,Chun-Hua Chen

DOI: https://doi.org/10.1039/d0nr08364j

IF: 6.7

2020-01-01

Nanoscale

Abstract:Black phosphorus (BP), a promising 2D material, has sparked a research boom in various areas, while its fatal atmospheric instability seriously obstructs the progress of most practical applications. To realize the novel scalable concept of can-sealing protection, the selective deposition of a series of hydrophobicallyor hydrophilically-functionalized Al2O3 nanostructured capping layers has been successfully achieved to seal the top surface of the exfoliated BP flake assemblies on Ag-patterned substrates. The hydrophobic Al2O3 columnar capping is evidenced as the most promising candidate to provide comprehensive protection against the severe rapid degradation of pristine BP even under a very high-humidity environment (RH = 85%) for a long period of time. The present work provides valuable insight into the distinct anisotropic degradation of the sealed BP flake assemblies evidently induced by the deposited hydrophobicallyor hydrophilically-functionalized Al2O3 capping.
Toward Air-Stable Multilayer Phosphorene Thin-Films and Transistors.

Joon-Seok Kim,Yingnan Liu,Weinan Zhu,Seohee Kim,Di Wu,Li Tao,Ananth Dodabalapur,Keji Lai,Deji Akinwande

DOI: https://doi.org/10.1038/srep08989

IF: 4.6

2015-01-01

Scientific Reports

Abstract:Few-layer black phosphorus (BP), also known as phosphorene, is poised to be the most attractive graphene analogue owing to its high mobility approaching that of graphene, and its thickness-tunable band gap that can be as large as that of molybdenum disulfide. In essence, phosphorene represents the much sought after high-mobility, large direct band gap two-dimensional layered crystal that is ideal for optoelectronics and flexible devices. However, its instability in air is of paramount concern for practical applications. Here, we demonstrate air-stable BP devices with dielectric and hydrophobic encapsulation. Microscopy, spectroscopy, and transport techniques were employed to elucidate the aging mechanism, which can initiate from the BP surface for bare samples, or edges for samples with thin dielectric coating, highlighting the ineffectiveness of conventional scaled dielectrics. Our months-long studies indicate that a double layer capping of Al2O3 and hydrophobic fluoropolymer affords BP devices and transistors with indefinite air-stability for the first time, overcoming a critical material challenge for applied research and development.
Improving Harsh Environmental Stability of Few‐Layer Black Phosphorus by Local Charge Transfer

Ning Wang,Haining Liu,Xi Zhou,Qingyuan Luo,Xue Yang,Hongyan Yang,Haibo Shu,Hua Xu,Qiuyu Zhang,Diane Hildebrandt,Xinying Liu,Shanlin Qiao,Bilu Liu,Qingliang Feng

DOI: https://doi.org/10.1002/adfm.202203967

IF: 19

2022-06-19

Advanced Functional Materials

Abstract:One‐step scalable production of high‐quality and ultra‐stable Au/FL‐BP single crystals with the strong local charge transfer. Au/FL‐BP crystals as well as related back‐gated field effect transistors show long‐term stability under harsh environments, including i) high humidity of 95%, ii) strong organic agent of alcohol and acetone for >45 days, and iii) high temperature at 573 K for >9 h. Few‐layer black phosphorus (FL‐BP) is a promising high‐mobility semiconductor with thickness‐dependent direct bandgap varying from visible to mid‐infrared region. The poor stability under harsh environment, stemming from irreversible oxidization of P atoms with lone pair electrons, restricts its practical applications. Herein, an electrochemical intercalation and in situ electrochemical deposition (EI&ED) approach to produce scalable Au nanoparticles/FL‐BP crystals with enhanced stability in harsh environment is developed. In this approach, the chemical reactivity of BP is significantly suppressed via the efficient local charge transfer from FL‐BP to electrochemically deposited Au nanoparticles. Thus obtained Au/FL‐BP based nano‐devices show good stability under harsh environment, including i) high humidity of 95%, ii) immersibility in organic agents for as long as 45 days, and iii) annealing at 573 K for 9 h. In addition, compared to bare FL‐BP crystals, Au/FL‐BP based photodetectors present 50‐ and 36‐fold improvement of photoresponsivity at 1550 and 1850 nm via the surface plasmonic enhancement effect. This EI&ED method can produce ultra‐stable FL‐BP crystals at large‐scale, which resolves the crucial barriers in using FL‐BP in large‐scale electronic and optoelectronic devices.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Protecting black phosphorus with selectively adsorbed graphene quantum dot layers

Vijay Laxmi,Weilong Dong,Haoqiang Wang,Dianyu Qi,Qiaoyan Hao,Zhengbiao Ouyang,Waqas Ahmad,Muhammad Najeeb Ullah Shah,Qunhui Yuan,Wenjing Zhang

DOI: https://doi.org/10.1016/j.apsusc.2020.148089

IF: 6.7

2021-02-01

Applied Surface Science

Abstract:Black phosphorus (BP) is an exciting material that possesses excellent electronic properties, such as high mobility, and thickness-dependent, easily tunable band gap, making it a promising candidate for applications in optoelectronics, energy storage and nano-photonics. However, the instability of mechanically exfoliated BP thin films under oxygen and humidity conditions is still a bottleneck in its practical applications. Herein, we choose a facile way to effectively protect BP by selectively adsorbing graphene quantum dots (GQDs) on its surface as a protective layer. This strategy can prevent the degradation of the thin BP layer in the presence of oxygen and humidity. We systematically investigated the impact of GQDs absorption on BP surface via atomic force microscopy, Raman spectroscopy, transmission electron microscopy and electrical measurements. Our results show that GQDs could effectively protects the BP surface from exposure to atmospheric oxidants, resulting in significantly improved stability along with enhanced mobility and on/off ratio of corresponding field-effect transistors (FETs). Importantly, the electrical properties of optimized FETs could be retained for over 24 h even under heating at 100 ℃ in ambient conditions. This work offers a facile approach to efficiently prevent BP and other air-sensitive materials from environmental oxidants for their practical applications.

chemistry, physical,physics, applied, condensed matter,materials science, coatings & films
Degradation Chemistry and Stabilization of Exfoliated Few-Layer Black Phosphorus in Water.

Taiming Zhang,Yangyang Wan,Huanyu Xie,Yang Mu,Pingwu Du,Dong Wang,Xiaojun Wu,Hengxing Ji,Lijun Wan

DOI: https://doi.org/10.1021/jacs.8b02156

IF: 15

2018-01-01

Journal of the American Chemical Society

Abstract:Exfoliated black phosphorus (BP), as a monolayer or few-layer material, has attracted tremendous attention owing to its unique physical properties for applications ranging from optoelectronics to photocatalytic hydrogen production. Approaching intrinsic properties has been, however, challenged by chemical reactions and structure degradation of BP under ambient conditions. Surface passivation by capping agents has been proposed to extend the processing time window, yet contamination or structure damage rise challenges for BP applications. Here, we report experiments combined with first-principle calculations that address the degradation chemistry of BP. Our results show that BP reacts with oxygen in water even without light illumination. The reaction follows a pseudo-first-order parallel reaction kinetics, produces PO23-, PO33-, and PO43- with reaction rate constants of 0.019, 0.034, and 0.023 per day, respectively, and occurs preferentially from the P atoms locating at BP edges, which yields structural decay from the nanoflake edges in water. In addition, a negligible decay ratio (0.9 ± 0.3 mol %) and preserved photocatalytic activity of BP are observed after storage in deoxygenated water for 15 days without surface passivation under ambient light. Our results reveal the chemistry of BP degradation and provide a practical approach for exfoliation, delivery, and application of BP.
Black phosphorus field effect transistors stable in harsh conditions via surface engineering

Bei Jiang,Hao Huang,Rui Chen,Guoli Li,Denis Flandre,Da Wan,Xue Chen,Xingqiang Liu,Cong Ye,Lei Liao

DOI: https://doi.org/10.1063/5.0021335

IF: 4

2020-09-14

Applied Physics Letters

Abstract:Black phosphorus (BP) has potential for fabricating p-type transistors in ultra-thin 2D-material complementary circuits. However, as the synergetic effect of water and oxygen leads to performance degradation under an ambient atmosphere, it is urgent to develop a passivation strategy for robust stability. Herein, a scalable superhydrophobic passivation layer is designed to improve the stability of BP transistors, which consists of fluoroalkylsilane-coated titanium dioxide (TiO2) nanoparticles. Due to the superhydrophobic property of the passivation layer, the BP transistors preserve intrinsic performance in extremely wet conditions, including humid air, water, HCl, and KOH. After 28 days in atmospheric conditions, the performance presents only 20% channel current degradation and the device can work even after 60 days. This work not only experimentally demonstrates robust stable BP transistors in harsh conditions but also provides a highly efficient and damage-free strategy to suppress the influence of water adsorption in atmospheric conditions for highly stable 2D materials devices.

physics, applied
Electrostatic Functionalization and Passivation of Water-Exfoliated Few-Layer Black Phosphorus by Poly Dimethyldiallyl Ammonium Chloride and Its Ultrafast Laser Application.

Qingliang Feng,Hongyan Liu,Meijie Zhu,Jing Shang,Dan Liu,Xiaoqi Cui,Diqin Shen,Liangzhi Kou,Dong Mao,Jianbang Zheng,Chun Li,Jin Zhang,Hua Xu,Jianlin Zhao

DOI: https://doi.org/10.1021/acsami.8b00556

IF: 9.5

2018-01-01

ACS Applied Materials & Interfaces

Abstract:Few-layer black phosphorus (BP) which exhibits excellent optical and electronic properties, has great potential applications in nanodevices. However, BP inevitably suffers from the rapid degradation in ambient air because of the high reactivity of P atoms with oxygen and water, which greatly hinders its wide applications. Herein, we demonstrate the electrostatic functionalization as an effective way to simultaneously enhance the stability and dispersity of aqueous phase exfoliated few-layer BP. The poly dimethyldiallyl ammonium chloride (PDDA) is selected to spontaneously and uniformly adsorb on the surface of few-layer BP via electrostatic interaction. The positive charge-center of the N atom of PDDA, which passivates the lone-pair electrons of P, plays a critical role in stabilizing the BP. Meanwhile, the PDDA could serve as hydrophilic ligands to improve the dispersity of exfoliated BP in water. The thinner PDDA-BP nanosheets can stabilize in both air and water even after 15 days of exposure. Finally, the uniform PDDA-BP-polymer film was used as a saturable absorber to realize passive mode-locking operations in a fiber laser, delivering a train of ultrafast pulses with the duration of 1.2 ps at 1557.8 nm. This work provides a new way to obtain highly stable few-layer BP, which shows great promise in ultrafast optics application.
Construction of hierarchical functionalized black phosphorus with polydopamine: A novel strategy for enhancing flame retardancy and mechanical properties of polyvinyl alcohol

Shuilai Qiu,Yifan Zhou,Xiyun Ren,Bin Zou,Wenwen Guo,Lei Song,Yuan Hu

DOI: https://doi.org/10.1016/j.cej.2020.126212

IF: 15.1

2020-12-01

Chemical Engineering Journal

Abstract:As a rising star of two-dimensional (2D) materials, single or few-layer black phosphorus (BP) possess great potential as nanofiller in fabricating polymer nanocomposites, due to its thermodynamic stability, nano-size effect and structural characteristics. Herein, few-layer BP nanosheets were scalable exfoliated via solvent-thermal method, the Lithium ion intercalation was achieved during this procedure. Follow by a polydopamine (PDA) encapsulated BP sandwich nanostructure was developed by oxidation–reduction strategy, which improved the air stability of few-layer BP and its interfacial compatibility with polymer matrix. As could be expected, the PDA encapsulated BP (BP-PDA) can effectively enhance the mechanical properties and flame retardancy of polyvinyl alcohol (PVA) nanocomposite films. For instance, the PVA/BP-PDA5.0 nanocomposite film loaded with 5 wt% BP-PDA exhibited 57.2% maximum decrease in peak heat release rate and 47.9% maximum reduction in total heat release. Meanwhile, while the BP-PDA loading achieved 2 wt%, PVA/BP-PDA2.0 nanocomposite film revealed an 81.1% increase in the tensile strength. In particular, on account of dual protection of the PDA encapsulation and polymer matrix embedding, the air stability of BP in PVA matrix was significantly improved. As an evidence, the ratio of Ag1/Ag2 in Raman spectra of BP-PDA decreased from the initial 0.72 to 0.62, even after exposed to air for five months, indicating a low level of oxidation. This work provides a novel strategy for scalable exfoliation and functionalization of BP, and enables a wide range of potential applications of BP in polymer nanocomposites.

engineering, chemical, environmental
Light stabilizer and diazo passivation of black phosphorus nanosheets: Covalent functionalization endows air stability and flame retadancy enhancements

Shuilai Qiu,Yanbei Hou,Xia Zhou,Yifan Zhou,Jingwen Wang,Bin Zou,Wenhao Yang,Lei Song,Yuan Hu

DOI: https://doi.org/10.1016/j.cej.2021.131532

IF: 15.1

2021-12-01

Chemical Engineering Journal

Abstract:As a new nano flame retardant, black phosphorus (BP) is easy to degrade and oxidize in the presence of water and oxygen, especially in the case of light, this process will be accelerated. In order to delay the oxidative degradation of BP and maintain its structure stability and flame retardant properties, the light stabilizer, free radical quenching type hindered amine is used to improve the ambient stability and the flame retardant efficiency of BP. In this work, BP was modified by diazotization to obtain active chlorine groups, and then the hindered amine light stabilizer was grafted onto the surface of BP through covalent reaction to form functionalized BP (BP-HAN). The fire risk of epoxy resin can be obviously reduced by introducing the BP-HAN into the matrix. The addition of 2 wt% BP-HAN can reduce the PHRR and THR value of epoxy by 56.0% and 48.2%, respectively. In particular, epoxy composites with only 0.5 wt% BP-HAN were able to achieve UL-94V-0 rating with an oxygen index of more than 30. In addition, compared with pure BP nanosheets, the ambient stability of BP modified by hindered amine was significantly improved. This work provides a reference for the application of BP in the field of flame retardant, and simultaneously achieves the improvement of the ambient stability and flame retardant performance of BP.

engineering, chemical, environmental
Electrochemical Exfoliation and Functionalization of Black Phosphorene to Enhance Mechanical Properties and Flame Retardancy of Waterborne Polyurethane

Lingxin He,Xia Zhou,Wei Cai,Yuling Xiao,Fukai Chu,Xiaowei Mu,Xianling Fu,Yuan Hu,Lei Song

DOI: https://doi.org/10.1016/j.compositesb.2020.108446

IF: 11.322

2020-01-01

Composites Part B Engineering

Abstract:Similar to graphene, few-layer black phosphorus possesses many excellent properties such as good thermal stability, mechanical properties and unique characteristic dimension effects, which is considered as promising nanoadditives. But the low yield and inferior interfacial adhesion with polymer matrix are unavoidable obstruction to fabricate high performance nanocomposites. Herein, we report a facile and environmentally friendly approach to simultaneously exfoliate and modify black phosphorus (BP) by electrochemical cathodic exfoliation, where BP crystal acted as the cathode and ethylene imine polymer (PEI) acted as electrolyte and modifier. The positively charged PEI would uniformly anchor on the surface of the newly peeled-off BP nanosheets through electrostatic attraction effect, resulting in preventing the agglomeration of BP nanosheets and improve the compatibility between BP and waterborne polyurethane (WPU) matrix. Significantly, with the addition of 2.0 wt% PEI modified BP in WPU matrix, the fire safety of WPU composites was enhanced. The peak heat-release rate, total heat release, total smoke production and total CO yield are decreased by 34.3%, 21.2%, 22.3% and 50.2% compared to pure WPU, respectively. Also, the tensile strength of WPU composites was increased by 71% (from 21.9 to 31.0 MPa) at the cost of the breaking elongation slightly decreased by 5.6%. This work provides the possibility for the scalable preparation and a real application of BP in polymer nanocomposites.
Double-Layer Superhydrophobic Coating: Enhanced Anti-Corrosion and Anti-Fouling Resistance through Star Cross-linking of FPI/POSS@POA/F-SiO 2

Lijian Liu,Haihua Wang,Xixi Hao,Qinghua Zhang,Guiqiang Fei,Yihao Duan,Liyu Sun

DOI: https://doi.org/10.21203/rs.3.rs-4006075/v1

2024-01-01

Abstract:Abstract To address the escalating demand for anti-corrosive and anti-fouling solutions in marine environments, the development of superhydrophobic bilayer coating based on nanocomposite polymers applied to metal substrates is crucial. However, achieving concurrent anti-corrosive and anti-fouling functionalities remains a formidable challenge. In this study, a nanocomposite polymer coating was created through the star crosslinking of polyhedral oligomeric silsesquioxane (POSS) and fluorinated polyimide (FPI) prepolymer. Subsequently, a double-layer coating featuring a superhydrophobic layer was fashioned using the aforementioned coating as the base layer. Following a 50-day salt spray test, both the FPI/POSS-4 coating and the double-layer superhydrophobic FPI/POSS@POA/F-SiO2 coating demonstrated exemplary corrosion resistance. The impedance modulus (|Z| 0.01 Hz) of FPI/POSS-4 and FPI/POSS@POA/F-SiO2 was 3.17 × 109 and 7.04 × 1010 Ω⋅cm2, respectively, surpassing that of pure FPI coating by approximately two to three orders of magnitude. The enhanced performance for the FPI/POSS-4 single-layer coating resulted from the POSS star crosslinking, which bolstered coating compactness, thereby creating a physical barrier akin to the “labyrinth effect.” This hindered corrosive media penetration, thereby extending the penetration path. Conversely, the latter double-layer coating relied on the exceptional shielding provided by the underlying nanocomposite polymer coating and the inhibitory effects of the superhydrophobic coating against corrosive media. Notably, the fabricated superhydrophobic coating exhibited robust mechanical durability, retaining its superhydrophobicity even after 100 cycles of sandpaper friction and 80 cycles of tape peeling. In addition, the superhydrophobic coating demonstrated self-cleaning and anti-fouling properties. This study offers a fresh perspective on the preparation of double-layer superhydrophobic coatings with outstanding anti-corrosive and anti-fouling attributes, showcasing their potential and prospective practical applications.
Enhanced Stability of Black Phosphorus Field‐Effect Transistors via Hydrogen Treatment

Bensong Wan,Qionghua Zhou,Junying Zhang,Yue Wang,Bingchao Yang,Weiming Lv,Baoshun Zhang,Zhongming Zeng,Qian Chen,Jinlan Wang,Wenhong Wang,Fusheng Wen,Jianyong Xiang,Bo Xu,Zhisheng Zhao,Yongjun Tian,Zhongyuan Liu

DOI: https://doi.org/10.1002/aelm.201700455

IF: 6.2

2018-01-01

Advanced Electronic Materials

Abstract:Atomically thin black phosphorus (BP) exhibits great potential for wide applications in future electronic and optoelectronic devices. However, BP exhibits fast ambient degradation and is thus severely limited in practical applications. Here, a simple strategy using hydrogen treatment to enhance the environmental stability of BP flakes is reported. Owing to the drastically suppressed ambient degradation by hydrogen treatment, atomic BP flakes are just slightly corroded on the surface even after up to 4 weeks in air, and more impressively, the BP field-effect transistors still maintain over 85% of their initial mobility and I-ON/I-OFF ratio. First-principle calculations indicate that the hydrogen molecules are probably embedded between BP layers, and shift down the conduction band minimum, which strongly protects against the formation of superoxide on the surface and thus suppresses the ambient degradation of BP. This study provides a simple and nondestructive route to achieve air-stable BP devices.
Wet Chemical Method for Black Phosphorus Thinning and Passivation.

Shuangqing Fan,JingSi Qiao,Jiawei Lai,Haicheng Hei,Zhihong Feng,Qiankun Zhang,Daihua Zhang,Sen Wu,Xiaodong Hu,Dong Sun,Wei Ji,Jing Liu

DOI: https://doi.org/10.1021/acsami.8b21655

IF: 9.5

2019-01-01

ACS Applied Materials & Interfaces

Abstract:Layered black phosphorus (BP) has been expected to be a promising material for future electronic and optoelectronic applications since its discovery. However, the difficulty in mass fabricating layered air-stable BP severely obstructs its potential industry applications. Here, we report a new BP chemical modification method to implement all-solution-based mass production of layered air-stable BP. This method uses the combination of two electron-deficient reagents 2,2,6,6-tetramethylpiperidinyl- N-oxyl (TEMPO) and triphenylcarbenium tetrafluorobor ([Ph3C]BF4) to accomplish thinning and/or passivation of BP in organic solvent. The field-effect transistor and photodetection devices constructed from the chemically modified BP flakes exhibit enhanced performances with environmental stability up to 4 months. A proof-of-concept BP thin-film transistor fabricated through the all-solution-based exfoliation and modification displays an air-stable and a typical p-type transistor behavior. This all-solution-based method improves the prospects of BP for industry applications.
Fluorinated Black Phosphorene Nanosheets with Robust Ambient Stability for Efficient and Stable Perovskite Solar Cells

Tao Liu,Yinjiang Liu,Mengwei Chen,Xi Guo,Shuai Tang,Ruoqian Zhang,Zuji Xie,Jie Wang,Anping Gu,Shiwei Lin,Ning Wang

DOI: https://doi.org/10.1002/adfm.202106779

IF: 19

2021-09-29

Advanced Functional Materials

Abstract:Extraordinary electronic and photonic features (e.g., tunable direct bandgap, high ambipolar carrier mobility) render few-layer black phosphorus (BP) nanosheets/quantum dots an important optoelectronic material. However, most of the BP applied in metal halide perovskite solar cells (PSCs) are produced by sonication-assisted liquid exfoliation, which inevitably brings inferior electronic properties, thus leading to limited beneficial effects. Furthermore, this study uncovers that the intrinsic instability of BP nanosheets sandwiched between (CsFAMA)Pb(BrI)3 perovskite and spiro-OMeTAD has a deleterious effect on the performance stabilization of PSCs. To address the above constraints, a feasible strategy herein is developed by introducing high-quality fluorinated BP (F-BP) nanosheets synthesized by one-step electrochemical delamination. In addition to P-Pb coordination, there is a strong hydrogen bond between F− and MA+/FA+ as well as an ionic bond between F− and Pb2+ for the perovskite/F-BP interface, thus leading to fewer interfacial traps than perovskite/BP, which is responsible for the highest power conversion efficiency (22.06%) of F-BP devices. More importantly, F-BP devices exhibit significantly improved humidity and shelf-life stabilities due to the excellent ambient stability of F-BP, resulting from the antioxidation and antihydration behavior of fluorine adatoms. Overall, the findings provide a promising strategy to simultaneously enhance the photovoltaic performance and long-term stability of BP-based PSCs.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Stabilizing Black Phosphorus via Covalent Functionalization of Solvent Formamide

Zuoliang He,Rui Liu,Wanyu Shan,Huachao Zhao,Yujian Lai,Peng Li,Jingfu Liu

DOI: https://doi.org/10.1002/admi.202002247

IF: 5.4

2021-05-03

Advanced Materials Interfaces

Abstract:Black phosphorus (BP) has been attracting increasing scientific and technological interest for its excellent materials properties, but suffers from the intrinsic easy oxidization due to the high reactivity of lone‐pair electrons in each phosphorus atom. Herein, solvent formamide (FM) is proposed for the covalent modification of BP by a one‐step ultrasonication without any additive. FM is demonstrated to functionalize BP by the formation of single covalent bond PN, thus occupying the active lone‐pair electrons of P atoms and leading to the significant enhancement of the antioxidative capacity of BP. Density functional theory calculations also rationalize the formation of stable PN bond and its contribution to the high solvent‐exfoliated efficiency during the exfoliation of BP. The plausible reaction mechanism of FM with BP and the final 5‐membered ring structure of products are also proposed to explain the formation process of the stable PN bonds.

materials science, multidisciplinary,chemistry
Black Phosphorus: Degradation Favors Lubrication.

Shuai Wu,Feng He,Guoxin Xie,Zhengliang Bian,Jianbin Luo,Shizhu Wen

DOI: https://doi.org/10.1021/acs.nanolett.8b02092

IF: 10.8

2018-01-01

Nano Letters

Abstract:Due to its innate instability, the degradation of black phosphorus (BP) with oxygen and moisture was considered the obstacle for its application in ambient conditions. Here, a friction force reduced by about 50% at the degraded area of the BP nanosheets was expressly observed using atomic force microscopy due to the produced phosphorus oxides during degradation. Energy-dispersive spectrometer mapping analyses corroborated the localized concentration of oxygen on the degraded BP flake surface where friction reduction was observed. Water absorption was discovered to be essential for the degraded characteristic as well as the friction reduction behavior of BP sheets. The combination of water molecules as well as the resulting chemical groups (P-OH bonds) that are formed on the oxidized surface may account for the friction reduction of degraded BP flakes. It is indicated that, besides its layered structure, the ambient degradation of BP significantly favors its lubrication behavior.
Identification of Lattice Oxygen in Few-Layer Black Phosphorous Exfoliated in Ultrahigh Vacuum and Largely Improved Ambipolar Field-Effect Mobilities by Hydrogenation and Phosphorization

Qingfeng Gui,Xiaobin Zhu,Lizhe Liu,Zhen-Yu Jia,Ye-Heng Song,Shao-Chun Li,Paul K. Chu,Xinglong Wu

DOI: https://doi.org/10.1021/acsami.7b12469

IF: 9.5

2017-01-01

ACS Applied Materials & Interfaces

Abstract:Black phosphorus (BP) has recently attracted considerable attention due to its unique structure and fascinating optical and electronic properties as well as possible applications in photothermal agents. However, its main drawback is rapid degradation in ambient environments of H2O and O-2, which has led to much research on the improvement of its stability. Unfortunately, this research has not shown great improvement in carrier mobilities. Here, we perform scanning tunneling microscopy observations of few-layer BP (FLBP) sheets exfoliated in ultrahigh vacuum and reveal, for the first time, the existence of lattice oxygen introduced during crystal growth. As a proof-of-concept application, hydrogenation is conducted to remove the lattice oxygen atoms followed by phosphorization, which repairs the phosphorous vacancies caused by mechanical exfoliation and hydrogenation. The resulting FLBP sheets show high ambipolar field-effect mobilities of 1374 cm(2) V-1 s(-1) for holes and 607 cm(2) V-1 s(-1) for electrons at 2 K After storage in air for 3 days, the hole and electron mobilities only decrease to 1181 and 518 cm(2) V-1 s(-1), respectively, and no structural degradation is observed. This work suggests an effective means to improve both the mobility and stability of BP sheets rendering practical application of FLBP sheets possible.
Modification Strategies and Prospects for Enhancing the Stability of Black Phosphorus

Haohao Zhang,Caoyue Shan,Koulong Wu,Mingyuan Pang,Zhen Kong,Jiajia Ye,Wensi Li,Lei Yu,Zhao Wang,Yen Leng Pak,Juan An,Xing Gao,Jibin Song

DOI: https://doi.org/10.1002/cplu.202400552

2024-10-11

ChemPlusChem

Abstract:Black phosphorus is a two‐dimensional layer material with promising applications due to its many excellent physicochemical properties, including high carrier mobility, ambipolar field effect and unusual in‐plane anisotropy. Currently, BP has been widely used in biomedical engineering, photocatalysis, semiconductor devices, and energy storage electrode materials. However, the unique structure of BP makes it highly chemically active, leading to its easy oxidation and degradation in air, which limits its practical applications. Recently, researchers have proposed a number of initiatives that can address the environmental instability of BP, and the application of these physical and chemical passivation techniques can effectively enhance the environmental stability of BP, including four modification methods: covalent functionalization, non‐covalent functionalization, surface coordination, physical encapsulation and edge passivation. This review highlights the mechanisms of the above modification techniques in addressing the severe instability of BP in different application scenarios, as well as the advantages and disadvantages of each method. This review can provide guidance for more researchers in studying the marvellous properties of BP and accelerate the practical application of BP in different fields.

chemistry, multidisciplinary
Construction of Multifunctional and Adjustable Langmuir–Blodgett Composite Films Containing Black Phosphorus with High Stability for Optically Electrical Applications

Ran Wang,Na Li,Chongling Wang,Jing Gao,Liting Guo,Zhihui Qin,Jianmin Gu,Mingli Wang,Zhiwei Liu,Tifeng Jiao

DOI: https://doi.org/10.1021/acs.langmuir.1c01260

IF: 3.9

2021-07-02

Langmuir

Abstract:Fabrication of composite thin-film materials based on black phosphorus (BP) will greatly broaden the applications of BP in various areas. However, it is still a challenge to prepare a BP-based composite film with good stability and controllable structure. In this work, a series of BP-based composite Langmuir–Blodgett (LB) films are prepared by the self-assembly of polyethyleneimine (PEI)-modified BP nanosheets (BPNSs) (BPNS-PEI) and dye molecules. The presence of PEI greatly improves the stability of BPNSs. As for BPNS-PEI and dye molecules, the electrostatic interactions or π–π stacking interactions ensure the formation of stable composite LB films. Due to the protonation and deprotonation of amino groups, the synthesized BPNS-PEI/dye composite films show a sensitive response to acid and alkali gases, which shows wide application prospects as a highly sensitive gas sensor. Furthermore, surface-enhanced Raman scattering (SERS) proves that the prepared LB films exhibit good reproducibility and obvious Raman enhancement effect on rhodamine 6G molecules. In addition, due to the high carrier transfer rate of the obtained composite films, they possess enhanced photocurrent generation performance than pure BPNS-PEI and pure dye films. The current work demonstrates an effective method for preparing the ordered self-assembled BP-based composite LB films with good SERS and photoelectric conversion performance.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acs.langmuir.1c01260?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acs.langmuir.1c01260</a>.TEM images, SEM images, AFM images, acid–alkali response mechanism, and stability of BPNS-PEI-based dye composite films (<a class="ext-link" href="/doi/suppl/10.1021/acs.langmuir.1c01260/suppl_file/la1c01260_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

chemistry, multidisciplinary, physical,materials science

Proton microscopy and microanalysis--biological applications.

Robust Superhydrophobic Bilayer Coating: Long-term Anti-Corrosion and Anti-Fouling Resistance Enabled by POSS Star Cross-Linking and Fluoride-Modified SiO2 Nanoparticles Specific Synergies

Long-term Can-Sealing Protection: a Stable Black Phosphorus Nanoassembly Achieved Through Heterogeneous Hydrophobic Functionalization.

Toward Air-Stable Multilayer Phosphorene Thin-Films and Transistors.

Improving Harsh Environmental Stability of Few‐Layer Black Phosphorus by Local Charge Transfer

Protecting black phosphorus with selectively adsorbed graphene quantum dot layers

Degradation Chemistry and Stabilization of Exfoliated Few-Layer Black Phosphorus in Water.

Black phosphorus field effect transistors stable in harsh conditions via surface engineering

Electrostatic Functionalization and Passivation of Water-Exfoliated Few-Layer Black Phosphorus by Poly Dimethyldiallyl Ammonium Chloride and Its Ultrafast Laser Application.

Construction of hierarchical functionalized black phosphorus with polydopamine: A novel strategy for enhancing flame retardancy and mechanical properties of polyvinyl alcohol

Light stabilizer and diazo passivation of black phosphorus nanosheets: Covalent functionalization endows air stability and flame retadancy enhancements

Electrochemical Exfoliation and Functionalization of Black Phosphorene to Enhance Mechanical Properties and Flame Retardancy of Waterborne Polyurethane

Double-Layer Superhydrophobic Coating: Enhanced Anti-Corrosion and Anti-Fouling Resistance through Star Cross-linking of FPI/POSS@POA/F-SiO 2

Enhanced Stability of Black Phosphorus Field‐Effect Transistors via Hydrogen Treatment

Wet Chemical Method for Black Phosphorus Thinning and Passivation.

Fluorinated Black Phosphorene Nanosheets with Robust Ambient Stability for Efficient and Stable Perovskite Solar Cells

Stabilizing Black Phosphorus via Covalent Functionalization of Solvent Formamide

Black Phosphorus: Degradation Favors Lubrication.

Identification of Lattice Oxygen in Few-Layer Black Phosphorous Exfoliated in Ultrahigh Vacuum and Largely Improved Ambipolar Field-Effect Mobilities by Hydrogenation and Phosphorization

Modification Strategies and Prospects for Enhancing the Stability of Black Phosphorus

Construction of Multifunctional and Adjustable Langmuir–Blodgett Composite Films Containing Black Phosphorus with High Stability for Optically Electrical Applications