Occupational health and the school leaver.

N. Cherry,R. Gear,H. Waldron

DOI: https://doi.org/10.1093/oxfordjournals.pubmed.a043583

Community Medicine

Abstract:

What problem does this paper attempt to address?

Copper oxide–modified screen-printed carbon electrodes for the detection of mycobacterium tuberculosis infection treating drug: Isoniazid

Shengzhou Qiu,Chenxi Wu,Sima Akter,Shaoli Hong,Huihong Liu,Sakil Mahmud

DOI: https://doi.org/10.1007/s11581-024-05863-0

IF: 2.961

2024-10-03

Ionics

Abstract:This study presents the development of copper oxide–modified screen-printed carbon electrodes (CuO/SPCE) for the sensitive electrochemical detection of isoniazid (INZ). The electrodeposition of CuO on the surface of SPCE in a dilute CuSO 4 solution forms CuO amorphisms or clusters, which catalyze the oxidation of INZ. The sensor exhibited a linear response to INZ concentrations ranging from 4 to 200 μM with a correlation coefficient of 0.991 and a limit of detection (LoD) of 8.39 μM. Stability and reproducibility were confirmed through repetitive measurements with relative standard deviations of 0.27% and 1.20%, respectively. Interference studies demonstrated the sensor's selectivity toward INZ, and a real sample analysis of pharmaceutical tablets yielded recovery rates ranging from 99.50 to 105.03%. Hence, regular monitoring of INZ dosage levels in human body fluids is critical, necessitating the development of sensitive, effective, and consistent methods to quantify INZ in clinical and pharmaceutical samples. Graphical

chemistry, physical,physics, condensed matter,electrochemistry
Novel β-cyclodextrin doped carbon dots for host–guest recognition-assisted sensing of isoniazid and cell imaging

Lu-Shuang Li,Ying-Xia Zhang,Wei Gong,Jing Li

DOI: https://doi.org/10.1039/d2ra05089g

IF: 4.036

2022-10-22

RSC Advances

Abstract:In the present study, novel β-cyclodextrin doped carbon dots (CCDs) were prepared via a simple one-pot hydrothermal method at a mild temperature (140 °C), using mixtures of β-cyclodextrin and citric acid as precursors. By characterizing the chemical properties of CCDs prepared at 140 °C and 180 °C, the importance of low-temperature reaction for preservation of the specific structure of β-CD was elucidated. The CCDs showed excellent optical properties and were stable to changes in pH, ionic strength and light irradiation. Since the fluorescence of the CCDs could be selectively quenched by isoniazid (INZ) through specific host–guest recognition effects, a convenient isoniazid fluorescence sensor was developed. Under the optimal conditions, the sensor exhibited a relatively low detection limit of 0.140 μg mL −1 and a wide detection range from 0.2 μg mL −1 to 50 μg mL −1 for INZ detection. Furthermore, the sensor was employed successfully for the determination of INZ in urine samples with satisfactory recovery (91.1–109.5%), displaying potential in clinical applications. Finally, low cytotoxicity of the prepared CCDs was confirmed using the CCK-8 method, followed by application in HepG2 cell imaging.

chemistry, multidisciplinary
Development of isoniazid electrochemical sensor using nickel ferrite - nitrogen and sulfur co-doped graphene quantum dot nanocomposite as a new electrode modifier

Mohammad Kazem Ahsani,Fatemeh Ahour,Elnaz Asghari

DOI: https://doi.org/10.1038/s41598-024-64797-9

IF: 17.694

2024-06-22

NanoScience and Technology

Abstract:This work reports the synthesis of nickel ferrite decorated nitrogen and sulfur co-doped graphene quantum dot (NF@N, S:GQD) and its use as an electrode modifier. The developed NF@N, S:GQD modified glassy carbon electrode (NF@N, S:GQD/GCE) was applied to assess isoniazid (INZ) concentration based on its oxidation at the surface of the proposed electrode. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used as appropriate electrochemical techniques to study the electrochemical behavior of INZ and determine it. Based on combined evidence from surveys, research, and personal results, it is thought that the combination of nickel ferrite and doped graphene quantum dots can synergistically affect results, leading to increased sensitivity and reduced detection limits. This is probably mainly due to the high electrical conductivity of N, S-GQD structure, the electrocatalytic effect of nickel ferrite, and increased surface area resulting from the nano size of the modifier. The optimum conditions for preparing of the modified electrode and determination of INZ are selected by performing electrochemical experiments. The voltammetric response of the sensor is linear from 0.3 to 40 nM INZ under optimal conditions and the detection limit of the sensor is 0.1 nM. The validity and performance of the prepared sensor were confirmed by determining the amount of INZ in the drug and urine as real samples. The composite of doped nanoparticles and nickel ferrite is an innovative modification material to create electrochemical sensors with high sensitivity and selectivity that can be used in pharmaceutical applications.
A New Hybrid β-Cyclodextrin/PAMAM G.0 as an Electrochemical Sensor for Isoniazid Detection

Priscila Fernanda Pereira Barbosa,Valmor Roberto Mastelaro,Devaney Ribeiro do Carmo

DOI: https://doi.org/10.1007/s11665-023-09114-7

IF: 2.3

2024-01-06

Journal of Materials Engineering and Performance

Abstract:Β-cyclodextrin was functionalized with the polyamide dendrimer PAMAM G.0, and the resulting material was used to adsorb copper before reacting with potassium hexacyanoferrate (II) to form a mixed valence complex on the -cyclodextrin/PamamG.0 surface (β-Cd-PAMAM-Cu/Fe). This material and its precursors were characterized by scanning electron microscopy, x-ray diffraction and by x-ray photoelectron spectroscopy. The β-Cd-PAMAM-Cu/Fe material was successfully tested in the electrocatalytic oxidation of isoniazid (ISO) using cyclic voltammetry (CV) and square wave voltammetry (SWV). ISO is highly selective and effective against Mycobacterium tuberculosis, and used for the treatment of tuberculosis. It can cause drug resistance, neurotoxicity and even hepatic impairment when ISO is consumed in excess, so its detection is highly desirable. The electrochemical performance of the modified sensor exhibited a limit of detection (LOD) of 3.69 × 10 −7 mol L −1 with a linear range from 1.0 × 10 −6 to 1.0 × 10 −5 mol L −1 of isoniazid, using CV. A second region was detected with a limit of detection of 1.98 × 10 −5 mol L −1 with a linear range from 6.0 × 10 −5 to 9.0 × 10 −4 mol L −1 of isoniazid, using CV. In the same way, two linear regions were obtained using SWV, whose LOD was 6.49 × 10 −9 mol L −1 in the concentration range of 5.0 × 10 −7 to 1.0 × 10 −6 mol L −1 and the second region presented a LOD of 1.96 × 10 −7 mol L −1 in the concentration range of 2.0 × 10 −6 to 1.0 × 10 −5 mol L −1 . Recoveries ranging from 97.20 to 100.57% were calculated, demonstrating satisfactory accuracy of the proposed method.

materials science, multidisciplinary
Tröger's base-linked aluminium phthalocyanine polymer for discriminative electrochemistry sensing of isoniazid antibiotic

Gang Xiang,Wensi Xu,Wenfeng Zhuge,Qing Huang,Cuizhong Zhang,Jinyun Peng

DOI: https://doi.org/10.1039/d3ay02298f

IF: 3.1

2024-01-20

Analytical Methods

Abstract:Isoniazid is a first-line drug used to treat tuberculosis. However, its excessive use can lead to serious adverse effects. Thus, strict monitoring of the isoniazid levels in medications and human systems is required. In this study, a new polymer (AlPc-TB POP) containing metal phthalocyanine and Tröger's base was synthesized and explored as an electrocatalyst for the oxidation of isoniazid. The results indicated that the polymer is an excellent electron-transfer medium for isoniazid oxidation. The AlPc-TB POP-based sensor quantified isoniazid in the linear range of 0.1-130 μM, with a detection limit of 0.0185 μM. The response of the developed sensor to isoniazid was reproducible and stable. Furthermore, this method can accurately determine isoniazid levels by ignoring the influence of common interfering species in tablets and biological samples. This study contributes to the development of nitrogen-rich porous organic polymers and offers a novel strategy for addressing challenges in disease therapeutic efficacy and public safety monitoring.

spectroscopy,chemistry, analytical,food science & technology
High resolution purification of DNA restriction fragments using HPLC.

M. Merion,W. Warren,C. Stacey,M. E. Dwyer

1988-03-01

BioTechniques

Abstract:
An Enzyme-Induced Novel Biosensor for the Sensitive Electrochemical Determination of Isoniazid

Rajasekhar Chokkareddy,Natesh Kumar Bhajanthri,Gan G Redhi,Natesh Bhajanthri,Gan Redhi

DOI: https://doi.org/10.3390/bios7020021

2017-06-05

Biosensors

Abstract:In this present work, a glassy carbon electrode (GCE) was modified primarily with multiwalled carbon nanotubes (MWCNTs) and a composite of MWCNTs and titanium oxide nanoparticles (TiO2NPs). The enzyme horseradish peroxidase (HRP) was immobilized to enhance the sensing ability of GCE. The proposed biosensor was used for the sensitive determination of isoniazid (INZ) in various pharmaceutical samples. The electrochemical behaviour of the developed MWCNT-TiO2NPs-HRP-GCE biosensor was studied by using cyclic voltammetry (CV) and differential pulse voltammetric (DPV) techniques. Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), thermogravimetry (TGA) and transmission electron microscopy (TEM) techniques were used to characterize the developed sensor. Phosphate buffer solution (PBS) with pH 7 was used as supporting electrolyte in the present investigation. The cyclic voltammetric results revealed that the increment of anodic peak currents for the enzyme-induced sensor was almost 8-fold greater than that of a bare GCE. The DPV technique exhibited good limit of detection and limit of quantification values, viz., 0.0335 μM and 0.1118 μM, respectively. Moreover, the developed sensor showed long-lasting stability and repeatability without any interferents. This strongly indicates that the fabricated sensor shows outstanding electrochemical performance towards INZ, with excellent selectivity and sensitivity. The developed sensor was successfully applied to pharmaceutical samples and gave good percentages of recoveries.
Rational tuning of binding properties of pillar [5] arene-based sensing material by synergistic effect and its application for fluorescent turn-on detection of isoniazid and controlled reversible morphology

Jian-Peng Hu,Qi Zhao,Qi Lin,Hong Yao,You-Ming Zhang,Tai-Bao Wei

DOI: https://doi.org/10.1016/j.aca.2024.342332

2024-04-01

Abstract:Isoniazid (INH) is crucial in the treatment of tuberculosis; however, its overuse may induce significant gastrointestinal and hepatic side effects. On October 27, 2017, the International Agency for Research on Cancer, under the auspices of the World Health Organization, published a list of carcinogens for preliminary collation and reference. Isoniazid was categorized as a Group 3 carcinogen. The efficient detection of INH poses an important and challenging task. In this study, a "synergistic effect" is incorporated into the pillar (Yamagishi and Ogoshi, 2018) [5] arene-based macrocyclic host (DPA) by strategically attaching bis-p-hydroxybenzoic acid groups to the opposite ends of the pillar (Yamagishi and Ogoshi, 2018) [5] arene. This combination endows DPA with a reversible and selective fluorescence response to isoniazid. Additionally, DPA exhibits excellent analytical capabilities for isoniazid, including speed and selectivity, with a detection limit as low as 4.85 nM. Concurrently, DPA can self-assemble into a microsphere structure, which is convertible into micrometer-sized tubular structures through host-guest interactions with isoniazid. The introduction of a competitive guest, trimethylamine, enables the reversion to its microsphere structure. Consequently, this study presents an innovative and straightforward synthetic approach for smart materials that facilitates the reversible morphological transition between microspheres and microtubes in response to external chemical stimuli. This discovery provides a valuable strategy for designing "synergistic effects" in constructing trace-level isoniazid-responsive interfaces, with potential applications across various fields, such as controlled drug delivery.
Supramolecular phenolic network-engineered C-CeO2 nanofibers for simultaneous determination of isoniazid and hydrazine in biological fluids

Gang Lang,Jing Feng,Bo Feng,Junlan Hu,Zhiling Ran,Zhiting Zhou,Zhenju Jiang,Yunxiang He,Junling Guo

DOI: https://doi.org/10.1016/j.cclet.2023.109113

IF: 9.1

2023-09-01

Chinese Chemical Letters

Abstract:Electrochemical sensing provides a powerful technological means for the therapeutic drug monitoring of drug-resistant tuberculosis but requires a functionalized electrode to capture the analytes and catalyze their redox reactions. Herein, we construct a nickel-tannic acid supramolecular network (Ni-TA) on the surface of electrospun-derived C-CeO2 nanofiber for the sensitive and simultaneous detection of isoniazid (INZ) and hydrazine (HYD). Mechanistic investigations demonstrate that Ni-TA is electronegative and hydrophilic, thus facilitating an efficient mass and electron transfer. Ni-TA/C-CeO2 has higher adsorption rate constants (0.091 g mg–1 h–1 for INZ, and 0.062 g mg–1 h–1 for HYD) than native C-CeO2 (0.075 g mg–1 h–1 for INZ, and 0.047 g mg–1 h–1 for HYD). Moreover, Ni-TA/C-CeO2 (56 Ω) has lower charge transfer resistances than C-CeO2 (417 Ω). Ni-TA/C-CeO2 performs low detection limits and wide linearity ranges for INZ (0.012 μmol/L and 0.1-400 μmol/L, respectively) and HYD (0.008 μmol/L and 0.015-1420 μmol/L, respectively), coupled with high selectivity, cycle stability and reproducibility. This research demonstrated the promising applications of Ni-TA/C-CeO2 by analyzing human-collected plasma and urine samples.

chemistry, multidisciplinary
Exploring the potential of MIL-53(Fe) as a fluorescent probe for the highly selective and sensitive detection of anti-tuberculosis drug—Isoniazid

Diksha Aggarwal,Twinkle Garg,Ankush Sheoran,Sonal Singhal

DOI: https://doi.org/10.1016/j.molstruc.2023.136899

IF: 3.841

2024-02-01

Journal of Molecular Structure

Abstract:Ecosystem and human health can both be catastrophically harmed by overuse of anti-tuberculosis drug, isoniazid. Within this frame of reference, an Fe-based metal organic framework (MIL-53(Fe)) was developed via hydrothermal route to successfully recognise and detect, isoniazid antibiotic, using fluorescence sensing. The structural, morphological and other important property insights of MIL-53(Fe) were gained using various techniques like FT-IR, XRD, FE-SEM, BET, TGA and VSM. The developed fluorescence probe exhibited fluorescence enhancement with the incremental addition of isoniazid antibiotic, in the range of 0.1 to 7.0 µM. The limit of detection (LOD) value was found to be 0.25 µM under optimal sensing conditions. MIL-53(Fe) demonstrated high selectivity and specificity for the detection of isoniazid. In addition, the sensor displayed excellent performance in reproducibility, repeatability and real water studies.

chemistry, physical
Facile synthesis of copper carbonate analog with peroxidase-like activity for colorimetric detection of isoniazid

Yan Dai,Hao Zhang

DOI: https://doi.org/10.1016/j.heliyon.2024.e34962

IF: 3.776

2024-07-20

Heliyon

Abstract:In this article, copper carbonate analog with good peroxidase-like activity was successfully synthesized for the first time via a simple co-precipitation of CuSO4▪5H2O and Na2CO3. The obtained copper carbonate analog exhibited excellent intrinsic peroxidase-like activity towards a classical peroxidase substrate of 3, 3', 5, 5' -tetramethylbenzidine (TMB) in the presence of hydrogen peroxide (H2O2) under an acidic environment. The study of the catalytic mechanism confirmed that the hydroxyl radical produced from the decomposition of H2O2 is the main reactive oxygen species responsible for the catalytic oxidation of TMB to oxTMB. Moreover, results from kinetic parameter analysis indicated that H2O2 was more easily and/or likely to attach to the copper carbonate analog than TMB. Subsequently, the effects of experimental conditions (buffer pH, temperature, and incubation time) on the catalytic activity of the copper carbonate analog were also optimized. Finally, a copper carbonate analog-based colorimetric sensor was developed to determine isoniazid. Under the optimal conditions, the linear range for isoniazid was as broad as 0-178.6 μM, and the detection limit was as low as 8.47 μM. The spiked recoveries of isoniazid in normal human serum has been observed in the range of 94.8%-105.5 %. This strategy focuses on the development of a green, cost-efficient peroxidase mimic with high activity, good biocompatibility, and a simple synthesis process.
Photoelectrochemical sensing of isoniazid and streptomycin based on metal Bi-doped BiOI microspheres grown on book-shape layers of Ti3C2 heterostructures

Chengzhi Ding,Shengnan Ma,Shuohao Wang,Ruixia Liang,Yuanyuan Liu,Wei Wang,Huihui Chen,Xufeng Guo,Jiao Wang,Li Wei

DOI: https://doi.org/10.1007/s00604-024-06280-w

2024-04-12

Abstract:Isoniazid and streptomycin are vital drugs for treating tuberculosis, which are utilized as efficient anti-tuberculosis agents. This paper presents a novel visible-light-driven composite photocatalyst Ti3C2/Bi/BiOI, which was built from Ti3C2 nanosheets and Bi/BiOI microspheres. Photoelectrochemical (PEC) sensors based on Ti3C2/Bi/BiOI were synthesized for isoniazid identification, which showed a linear concentration range of 0.1-125 μM with a detection limit of 0.05 μM (S/N = 3). Moreover, we designed a PEC aptasensors based on aptamer/Ti3C2/Bi/BiOI to detect streptomycin in 0.1 M PBS covering the electron donor isoniazid, because the isoniazid consumes photogenerated holes thus increasing the photocurrent effectively and preventing photogenerated electron-hole pairs from being recombined. Furthermore, PEC aptasensors based on aptamer/Ti3C2/Bi/BiOI were synthesized for streptomycin identification, which exhibited a linear concentration range of 0.01-1000 nM with a detection limit of 2.3 × 10-3 nM (S/N = 3), and are well stable in streptomycin sensing.
Development of Biocompatible 1D CuO Nanoneedles and Their Potential for Sensitive, Mass-Based Detection of Anti-Tuberculosis Drugs

Khizra Bano,Sadia Z. Bajwa,Nicole J. Bassous,Thomas J. Webster,Ayesha Shaheen,Ayesha Taj,Sadaf Hameed,Bushra Tehseen,Zhifei Dai,M. Zubair Iqbal,Waheed S. Khan

DOI: https://doi.org/10.1007/s13204-019-01003-7

2019-01-01

Applied Nanoscience

Abstract:Unique physical and chemical properties make 1D nanomaterials very attractive and their window of applications is broadened by the addition of biocompatible materials. Similarly, the massive side effects associated with the frequent use of antibiotics make it crucial to analyze the quantity and detect even the subservient amounts of antibiotics in vivo following their administration to patients. The present study describes the one-pot solvothermal approach to produce 1D CuO nanoneedles. Microscopic investigations revealed the presence of nanoneedles of about 8–15 nm in size with negative surface charge (− 30.51 mV). These structures were explored for the targeted detection of the anti-tubercular agent rifampicin. This developed interface showed excellent sensitivity, with the limit of detection as low as 9.4 nM and the limit of quantification as 20 nM. This sensor exhibited good selectivity towards the structural analogs (rifabutene, rifapentine) of the analyte. This study represents the potential of 1D nanomaterial in biomedical applications such as the development of interfaces for online monitoring.
Ratiometric Fluorescence Nanosensors Based on Core- Shell Structured Carbon/ CdTe Quantum Dots and Surface Molecularly Imprinted Polymers for the Detection of Sulfadiazine

Xiaoqiang Chen,Yu Luan,Ningwei Wang,Zhiping Zhou,Xiaoni Ni,Yunfei Cao,GuangShe Zhang,Yufeng Lai,Wenming Yang

DOI: https://doi.org/10.1002/jssc.201800866

IF: 3.614

2018-01-01

Journal of Separation Science

Abstract:Sulfadiazine is an environmental pollutant derived from abuse of antibiotics. Its content in environmental water is closely related to human health. Thus, a novel dual-emission surface molecularly imprinted nanosensor is designed for the specific adsorption and detection of sulfadiazine. In the system, blue emissive carbon quantum dots wrapped with silica served as the internal reference signal for eliminating background interference, while red emissive thioglycolic acid modified CdTe quantum dots (CdTe QDs), which are low dimensional semiconductor materials by the combination of cadmium and tellurium with excellent optical properties, were encapsulated in the imprinted layer to offer recognition signal. The fluorescence of CdTe quantum dots was quenched and the fluorescence quenching degree of carbon quantum dotswas inconspicuous with the increase of concentration of sulfadiazine, thereby reflecting the color change. The detection of sulfadiazine was successfully achieved in a concentration range of 0.25-20 mu mol/L with detection limit of 0.042 mu mol/L and nanosensors had specific recognition for sulfadiazine over its analogues. Compared to single-emission fluorescence sensors, ratiometric fluorescence nanosensors had wider linear range and higher detection accuracy. Furthermore, the nanosensors were also successfully applied for the determination of sulfadiazine in real water and milk samples with acceptable recoveries. The study provides a feasible method for the detection of sulfadiazine and a reference for the detection of sulfonamides.
Heparin-platinum Nanozymes with Enhanced Oxidase-Like Activity for the Colorimetric Sensing of Isoniazid.

Shao-Bin He,Liu Yang,Xiu-Ling Lin,Li-Ming Chen,Hua-Ping Peng,Hao-Hua Deng,Xing-Hua Xia,Wei Chen

DOI: https://doi.org/10.1016/j.talanta.2019.120707

IF: 6.1

2019-01-01

Talanta

Abstract:In this study, a colorimetric sensing assay of isoniazid based on excellent oxidase-like activity of heparin sodium stabilized platinum nanoparticles (HS-PtNPs) has been demonstrated. The newly prepared HS-PtNPs exhibit a great dispersion with an average size distribution of 4.8 +/- 0.6 nm, and maintain more than 90% catalytic activity under strong acid and alkali or long-term storage conditions, indicating a robust nanomaterial with attractive potential. The HS-PtNPs show distinct oxidase-like activity with an ultrahigh affinity (Km = 0.01012 mm) for 3, 3', 5, 5' tetramethylbenzidine (TMB). More significantly, we found that the pyridine ring of isoniazid has a strong reductive hydrazyl substitution, which can compete with TMB for the catalytic site of HS-PtNPs resulting in a colorless solution. Accordingly, a colorimetric sensing of isoniazid was fabricated. A linear relationship for isoniazid was achieved in 2.5 x 10(-6) to 2.5 x 10(-4) M (R-2 = 0.998) with a low limit of detection 1.7 x 10(-6) M (S/N = 3). Recovery experiments in drug tablets show that the standard recovery rates were 95%-103%. The quantitative detection data for isoniazid in drug tablets calculated respectively from the standard method and this method exhibited a high correlation coefficient (a slope of 0.9995), suggesting that high accuracy in isoniazid detection.
Coronary arterial calcium screening: ready for prime time?

S. Flamm

DOI: https://doi.org/10.1148/RADIOLOGY.208.3.9722830

IF: 19.7

1998-09-01

Radiology

Abstract:
Family rituals a powerful tool in family therapy.

M. Palazzoli,L. Boscolo,G. Cecchin,G. Prata

DOI: https://doi.org/10.1111/J.1545-5300.1977.00445.X

IF: 4.319

1977-12-01

Family Process

Abstract:The use of systemic models in family therapy obliged our team to devise therapeutic tasks involving the entire family. Among these, one was found to be extremely effective: the prescribing of a family ritual. This article gives details of on such example aimed at the destruction of a myth that had been created by three generations of a family. In order that the reader may have a adequate understanding of this ritual, were shall fully describe the story of the family and of the transgenerational evolution of this myth. In the description of the treatment of the family, certain errors were made by the therapists that will come to light-errors that, as usual, were far more instructive than the actual successes. Eventually, it was the very understanding of these errors and their repercussions that led us to the successful prescription of the ritual. Finally, detailed analysis of the substance and aim of the ritual will illustrate and explain exactly what we mean by the term ritual.
One-step preparation of N-doped grapheme quantum dots with high quantum yield for bioimaging and highly sensitive electrochemical detection of isoniazid

S Sivaselvam,C Viswanathan,N Ponpandian

DOI: https://doi.org/10.1016/j.bioadv.2022.212731

Abstract:Conventional techniques for synthesizing GQDs have a poor quantum yield (QY) that restricts their biological applications. Herein, we present a rapid, cost-effective and high quantum yield synthesis of nitrogen-doped graphene quantum dots (N-GQDs) through a scientific microwave reactor. The reaction parameters like microwave irradiation time, temperature, precursor concentration and pressure were optimized for achieving high quantum yield. The prepared N-GQDs exhibit bright blue fluorescence and excitation independent emission property with a quantum yield of 42.81%. In-vivo investigations on C. elegans revealed that the as-prepared N-GQDs are exceptionally biocompatible and maintain the normal physiological functioning of the primary and secondary targeted organs in nematodes. The synergetic effect of intestinal barrier and defecation behavior mitigates N-GQDs translocation into reproductive organs of nematode. In addition, the N-GQDs modified GCE was tested for electrochemical sensing characteristics towards the anti-tuberculosis drug isoniazid (INZ). The N-GQDs showed appreciable electrocatalytic performance towards INZ with high sensitivity (3.76 μA μM-1 cm-1). The differential pulse voltammetry (DPV) analysis of N-GQDs exhibit a lower detection limit of 10.91 nM for INZ. The N-GQDs modified sensor exhibits good reproducibility, excellent anti-interference ability and excellent analytical performance for INZ in real samples like human blood serum and urine samples.
A dual-channel sensing platform for the cross-interference-free detection of tetracycline and copper ion

Fengzhi Yue,Xiaolei Zhao,Xiangzhen Chen,Yongxin Li,Yuanyuan Huang,Dan Zhao,Jun Xu,Lei Jia,Tongqian Zhao

DOI: https://doi.org/10.1016/j.talanta.2024.126617

IF: 6.1

2024-11-01

Talanta

Abstract:Tetracycline (TC) and copper ion (Cu2+), as important additives in animal feed, play a crucial role in disease prevention and growth regulation. However, the abuse leads to concentration accumulation, which seriously threatens human health and the ecological environment. There is an urgent need to develop a detection method to achieve fast and synchronous detection of these pollutants without cross-interference. Here, a carbon dots-doped lanthanide-based fluorescent nanosensor (CDs@Tb-MOFs@SiO2-NH2-Eu) was synthesized, which can detect TC in the 380 nm channel by "antenna effect" and internal filtering effects (IFE), and identify Cu2+ in the 320 nm channel. The sensor was highly sensitive to TC within 0-4 μM with a detection limit as low as 3.64 nM, and Cu2+ could be detected within 0-40 μM with a detection limit of 38 nM. A portable dual-channel visual fluorescence sensor was obtained by loading the probes onto test paper and cotton swabs in food samples, which indicates the practicability of this sensing strategy.
Spectrofluorimetric Determination of Hydrochlorothiazide by a Carbon Dots-Based Probe via Inner Filtering Effect and Resonance Rayleigh Scattering

Ali Ghafarloo,Reza Sabzi,Naser Samadi,Hamed Hamishehkar

DOI: https://doi.org/10.21577/0103-5053.20210155

2022-01-01

Journal of the Brazilian Chemical Society

Abstract:Synthesis of carbon dots (CDs) from natural resources not only enables green synthesis and production of environmentally friendly materials, but also provides a cost-effective probe as a fluorescence nanosensor. The proposed sensor introduces a unique one-pot hydrothermal CDs synthesis from alfalfa leaves, which is promising for sensing hydrochlorothiazide (HCTZ) via inner filter effect (IFE) and resonance Rayleigh scattering (RRS). The as-prepared CDs had wide emission spectra, excitation-dependent emission, high solubility, high stability, and visible fluorescence light with a quantum yield of up to 11%. The absorption of HCTZ overlapped with the excitation spectra of CDs. Therefore, CDs represented excellent quenching due to IFE when HCTZ was gradually added. Furthermore, this fluorescent sensor was successfully used to quantify HCTZ in the linear ranges (0.17-2.50 μg mL-1) with the limit of detection of 0.11 μg mL-1. The sensing system was simple as no surface functionalization was required for CDs, leading to less laborious steps and more cost-effective synthesis. The reaction time was short, i.e., less than 2 min, indicating a simple approach for rapid analysis of HCTZ. By optimizing conditions, successful measurements were carried out on pharmaceutical tablets.

chemistry, multidisciplinary

Occupational health and the school leaver.

Copper oxide–modified screen-printed carbon electrodes for the detection of mycobacterium tuberculosis infection treating drug: Isoniazid

Novel β-cyclodextrin doped carbon dots for host–guest recognition-assisted sensing of isoniazid and cell imaging

Development of isoniazid electrochemical sensor using nickel ferrite - nitrogen and sulfur co-doped graphene quantum dot nanocomposite as a new electrode modifier

A New Hybrid β-Cyclodextrin/PAMAM G.0 as an Electrochemical Sensor for Isoniazid Detection

Tröger's base-linked aluminium phthalocyanine polymer for discriminative electrochemistry sensing of isoniazid antibiotic

High resolution purification of DNA restriction fragments using HPLC.

An Enzyme-Induced Novel Biosensor for the Sensitive Electrochemical Determination of Isoniazid

Rational tuning of binding properties of pillar [5] arene-based sensing material by synergistic effect and its application for fluorescent turn-on detection of isoniazid and controlled reversible morphology

Supramolecular phenolic network-engineered C-CeO2 nanofibers for simultaneous determination of isoniazid and hydrazine in biological fluids

Exploring the potential of MIL-53(Fe) as a fluorescent probe for the highly selective and sensitive detection of anti-tuberculosis drug—Isoniazid

Facile synthesis of copper carbonate analog with peroxidase-like activity for colorimetric detection of isoniazid

Photoelectrochemical sensing of isoniazid and streptomycin based on metal Bi-doped BiOI microspheres grown on book-shape layers of Ti3C2 heterostructures

Development of Biocompatible 1D CuO Nanoneedles and Their Potential for Sensitive, Mass-Based Detection of Anti-Tuberculosis Drugs

Ratiometric Fluorescence Nanosensors Based on Core- Shell Structured Carbon/ CdTe Quantum Dots and Surface Molecularly Imprinted Polymers for the Detection of Sulfadiazine

Heparin-platinum Nanozymes with Enhanced Oxidase-Like Activity for the Colorimetric Sensing of Isoniazid.

Coronary arterial calcium screening: ready for prime time?

Family rituals a powerful tool in family therapy.

One-step preparation of N-doped grapheme quantum dots with high quantum yield for bioimaging and highly sensitive electrochemical detection of isoniazid

A dual-channel sensing platform for the cross-interference-free detection of tetracycline and copper ion

Spectrofluorimetric Determination of Hydrochlorothiazide by a Carbon Dots-Based Probe via Inner Filtering Effect and Resonance Rayleigh Scattering