Abstract:Large beam-anode layer ion source can produce high-density ions, and has been widely used in plasma cleaning and assisted deposition. However, when increasing the ion-beams, arcing always occurs inside the ion source and serious etching will take place on the cathode which results in sample pollution especially in long-time cleaning. This work proposes two designed structures, called magnetic shields surrounding the anode and sputtering shields on the top of the inner and outer cathodes, respectively. The influence of the designed structure on the electromagnetic field and the plasma properties of the ion source are studied by a self-established simulation techniques based on the particle-in-cell/Monte Carlo collision method and test particle Monte Carlo method. The results show that the magnetic shields surrounding the anode cut off the magnetic induction line between the cathode and anode, which eliminates the arcing condition in the ion source. The sputtering shields for the cathodes use alumina ceramics because of the extremely low sputtering yield and high insulation performance. Therefore, the sputtering shields can not only resist the ion sputtering, but also shield the electric field on the outer surface of the cathode. As a result, the plasma discharge region is compressed towards the anode and away from the cathode simultaneously, which provides a stronger electric field force directed to the output region for Ar+ ions, also resulting in a suppressed cathode etching behavior but an improved Ar+ ion output efficiency. The optimized calculation shows that the best distance from the sputtering shields to the cathode surface is 9 mm. The discharge experiments reveal that the modified ion source can eliminate the inside arcing and provide a clean and strong ion beam with a high efficiency. At the same discharge current, the output efficiency of the modified ion source is 36% higher than that of the original ion source. When used in the plasma cleaning, the glass substrate remains transparent and keeps the original element composition ratio. The detected Fe content, comes from the cathode sputtering, is only 0.03% after the plasma cleaning for 1 h, which is 2 orders of magnitude smaller than that cleaned by the original ion source. The Fe content of the modified ion source is about 0.6% of the original ion source, which is in good agreement with the result of simulation optimization.

Ion source based on a circular anode layer plasma thruster

Broad Beam Ion Sources for Electrostatic Space Propulsion and Surface Modification Processes: From Roots to Present Applications

Study and Elimination of the Cathode Etching on Large Beam-Anode Layer Ion Source

Development of Volume Produced Negative Ion Source using a CCRF Discharge

Development and Characterization of Porous-Media Borosilicate Glass Ion Sources for Electrospray Thruster

Vacuum Arc Ion Sources

Characterization of Conical Ionic Liquid Ion Sources for 2-D Electrospray Thruster Arrays on Porous Substrates

Low current heaterless hollow cathode neutralizer for plasma propulsion-Development overview

Design of Compact Hexapole ECR Ion Thruster

Polyatomic ions from a high current ion implanter driven by a liquid metal ion source

Development and Characterization of a Novel Porous-Media Borosilicate Glass Ion Sources for Electrospray Thruster

Fabrication and characterization of a fully conventionally machined, high-performance porous-media electrospray thruster

Two-Electrode Ion-Extraction System of a Radio-Frequency Ion Source: Numerical and Experimental Studies of Erosion of the Accelerating Electrode

A Broad Beam Cold Cathode Penning Ionization Gauge Ion Source For Ion-Beam-Assisted Deposition

A new type of ion source

Experimental Study on the Ionization Regions in a Multi-Cusped Field Thruster

New concept of metal ion thruster based on pulsed thermionic vacuum arc discharge

- 24-Ion Beam Properties after Transport through an Extended Plasma Channel

Pulsed vacuum arc plasma source of supersonic metal ion flow

A dc plasma source for plasma–material interaction experiments

High intensity proton source based on a hollow-cathode reflex discharge