[Bromocriptine, lactation inhibition and drug monitoring].

A. Fournié,V. Graille,J. Montastruc

Abstract:

What problem does this paper attempt to address?

Synthesis of Polymer Thin Film Gradient with Nanometer Thickness through Water Diffusion Controlled Surface Polymerization

Dawei Jiang,Xueying Huang,Fei Qiu,Chuping Luo,Lequn Lee Huang

DOI: https://doi.org/10.1021/ma9018262

IF: 5.5

2010-01-01

Macromolecules

Abstract:We report here a unique, simple method for synthesizing polymer film gradients with nanometer thickness through diffusion controlled Surface polymerization. Polar solvents, especially water, have previously been shown to increase the rate of atom transfer radical polymerization (ATRP) of numerous monomers. That result made it apparent that the rate of ATRP polymerization could be regulated by the concentration of water in the polymerization solution. Oil the basis of this observation, WC Successfully developed a simple method for preparing polymer thin Film gradients on substrates by water concentration gradient formed along, the surface of substrates. An initiator attached Substrate was placed in it two-layer system of water and it Polymerization solution in which the diffusion of water into the polymerization Solution resulted in it monomer concentration gradient, leading to varied polymerization rates along the Substrate, and finally polymer thin Film gradients. Poly(ethylene glycol) methacrylate (PEGMA) gradient thin films formed on silica surfaces have thickness ranging from a few of hundreds of angstroms to more than 1000 angstrom.
Recent progress in non-photolithographic patterning of polymer thin films

Mingjun Qiu,Weiwei Du,Shangyu Zhou,Pengzhe Cai,Yingwu Luo,Xiaoxue Wang,Rong Yang,Junjie Zhao

DOI: https://doi.org/10.1016/j.progpolymsci.2023.101688

IF: 31.281

2023-01-01

Progress in Polymer Science

Abstract:Patterned polymer thin films are essential components in many devices and applications owing to the multi-functionality, flexibility, lightweight and cost-efficiency. Unfortunately, conventional photolithography needs the use of developers and strippers which contain solvents and reagents that may dissolve, swell or degrade the polymer thin film substrates. Alternatively, non-photolithographic strategies provide alternative options and avoid the complicated optical systems, offering versatile routes for fabricating polymeric micro- and nanostructures. In this review, we summarize the recent progress in non-photolithographic patterning methods including soft lithography, nanoimprint lithography, direct writing, self-assembly of block copolymers, area-selective vapor phase deposition and instability induced patterning. These patterning approaches have been applied to various applications such as chromic devices, polymer light-emitting diodes, sensors, transistors, and protein and cellular engineering and many other scenarios. Finally, the subsisting challenges and future research directions of non-photolithographic patterning approaches are highlighted from the aspect of resolution, reliability and scalability.
Controlled Grafting of Well-Defined Polymers on Hydrogen-Terminated Silicon Substrates by Surface-Initiated Atom Transfer Radical Polymerization

W. H. Yu,E. T. Kang,K. G. Neoh,Shiping Zhu

DOI: https://doi.org/10.1021/jp034330s

2003-01-01

Abstract:Controlled grafting of well-defined polymer brushes on the hydrogen-terminated Si(100) substrates (the Si-H substrate) was carried out via the surface-initiated atom transfer radical polymerization (ATRP). Surface initiators were immobilized on the Si-H substrates in three consecutive steps: (i) coupling of an omega-unsaturated alkyl ester to the Si-H surface under UV irradiation, (ii) reduction of the ester groups by LiAlH4, and (iii) esterification of the surface-tethered hydroxyl groups with 2-bromoisobutyrate bromide. Homopolymer brushes of methyl methacrylate (MMA), (2-dimethylamino)ethyl methacrylate (DMAEMA), and poly(ethylene glycol) monomethacrylate (PEGMA) were prepared by ATRP from the alpha-bromoester functionalized silicon surface. The chemical composition and topography of the graft-functionalized silicon surfaces were characterized by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM), respectively. Kinetic studies revealed a linear increase in polymer film thickness with reaction time, indicating that chain growth from the surface was a controlled process with a "living" characteristic. Diblock copolymer brushes consisting of PMMA and PDMAEMA blocks were obtained by using the homopolymer brushes as the macroinitiators for the ATRP of the second monomer, providing further evidence to the existence of "living" chain ends. ATRP from the Si-H surfaces allowed the preparation of polymeric-inorganic hybrid materials with well-structured surface and interface.
Photocatalytic Surface Initiation for Area-Selective Chemical Vapor Deposition of Polymer Thin Film

Yuanhao Shen,Mingjun Qiu,Xiaocheng Huang,Weiwei Du,Xinlei He,Yingwu Luo,Zheng Yang,Junjie Zhao

DOI: https://doi.org/10.1021/acsmaterialslett.4c01024

IF: 11.4

2024-01-01

ACS Materials Letters

Abstract:Nonlithographic patterning of polymer thin films enables various applications spanning from soft electronics to biomedical engineering. Developing area-selective deposition (ASD) for polymers could achieve self-aligned polymer growth, fostering the generation of complex nanostructures and device configurations with enhanced precision and versatility. However, due to the rapid radical propagation in chain reactions, achieving area-selective radical polymerization in all-dry processes still represents a huge challenge. Here, we report a photocatalytic surface-initiated chemical vapor deposition method. Localized radical generation on the TiO2 surface enabled ASD of a poly(glycidyl methacrylate) (pGMA) thin film. Increasing hydroxyl groups and eliminating Ti(III) defects on the TiO2 surface by the O-2 plasma pretreatment were found to be crucial to promote the photocatalytic initiation efficiency. Moreover, we obtained area selectivity of up to 92.2% on prepatterned TiO2/SiO2 substrates with pGMA film thickness over 10 nm on TiO2. Our work offers placement control over chain-growth polymers, providing new opportunities for bottom-up nonlithographic nanofabrication.
Chemical Modification on Top of Nanotopography to Enhance Surface Properties of PDMS

Jueyu Li,Min Wang,Yanbin Shen

DOI: https://doi.org/10.1016/j.surfcoat.2011.09.052

2012-01-01

Abstract:In the present study we report the surface modification of polydimethylsiloxane (PDMS) via combining both physical and chemical modification routes. Well defined nanostructures were created on PDMS surface through anodized aluminum oxide (AAO) template method. On top of the nanostructures, polyvinyl alcohol (PVA) was coated after the nano patterned PDMS was exposed to air plasma. The influence of the combined modification on surface properties of PDMS was examined by ATR-FTIR and water contact angle measurement. The impact of plasma pretreatment time and storage time in ambient environment were investigated, and property of films with or without nanostructures was compared. Experimental results show that long-term stable hydrophilic surfaces of PDMS can be achieved by PVA coating and be further improved by the surface nanostructures. The modified PDMS was also used for cell culture. The results indicate that both nanostructuring and chemically modifying the PDMS surface improves cell growth. Additionally, combination of these surface modifications has an additive effect on cell proliferation.
Multifunctional Photodegradable Polymers for Reactive Micropatterns

Lei Li,Xin-Xing Deng,Zi-Long Li,Fu-Sheng Du,Zi-Chen Li

DOI: https://doi.org/10.1021/ma501019c

IF: 5.5

2014-01-01

Macromolecules

Abstract:We report the first example of realizing the multi-functionalization of photodegradable polymers for the preparation of reactive micropatterns. Three o-nitrobenzaldehyde monomers (M1, M2, and M3) with ally!, propargyl, and epoxy groups were synthesized in high yields by the simple reactions of 5-hydroxy-2-nitro-benzaldehyde with ally! bromide, propargyl bromide, and epichlorohydrin, respectively. Passerini multicomponent polymerization (Passerini MCP) of M1, M2, or M3 with 1,6-hexanedioic acid and 1,6-diisocyanohexane generated three poly(ester-amide)s (P1, P2, and P3), the ester linkages of which were o-nitrobenzyl derivatives with functional groups from the corresponding monomers. Therefore, these polymers are photodegradable and can also be further modified by efficient click reactions like thiol-ene, copper catalyzed azide- alkyne cycloaddition (CuAAC), and epoxy amine reaction. Furthermore, Passerini MCP of M1, M2, and M3 with 1,6-hexanedioic acid and 1,6-diisocyanohexane could yield a photodegradable triply functional polymer (P4) containing all the three functional side groups which can be further modified by sequential click reactions. All the polymers were thoroughly characterized by H-1 NMR and GPC. Degradation of the polymers in solution under UV irradiation was investigated by UV vis and GPC, and they can all be photocleaved into oligomers and small molecules in 30 min. These functional polymers are extremely useful as positive photoresists to create reactive micropatterns. As an example, the triply functional polymer film was fabricated and cross-linked by epoxy amine reaction. After photoirradiation under a mask, reactive patterns with allyl and propargyl groups were obtained. Sequential modification of the reactive sites by CuAAC and thiol-ene reactions afforded multifunctional patterned surfaces with tunable properties as confirmed by scanning electron micrograph (SEM) and confocal fluorescence microscopy.
A Facile Method of Forming Nanoscale Patterns on Poly(ethylene Glycol)-Based Surfaces by Self-Assembly of Randomly Grafted Block Copolymer Brushes.

Xiang Gao,Wei Feng,Shiping Zhu,Heather Sheardown,John L. Brash

DOI: https://doi.org/10.1021/la800729c

IF: 3.9

2008-01-01

Langmuir

Abstract:Poly(oligo(ethylene glycol) methacrylate) (POEGMA) block poly(methyl methacrylate) (PMMA) brushes were synthesized on the silicon wafer surfaces by the surface-initiated atom transfer radical polymerization (ATRP) method. Atomic force microscopy, ellipsometry, and water contact angle methods were employed to study the surface morphology and stimulus-response behavior. It was found that simple solvent treatments could induce phase segregation of the POEGMA and PMMA segments thus introducing nanoscale patterns. The feature size could be less than 10 nm and was tunable on the nanoscale. Various patterns including spherical aggregates, wormlike aggregates, stripe patterns, perforated layers, and complete overlayers were obtained through adjusting the upper block layer thickness. These patterns could switch between the different morphologies reversibly after the treatment with selective solvents.
Controlling Pore Size and Wettability of A Unique Microheterogeneous Copolymer Film with Porous Structure

G Zhang,N Fu,H Zhang,JY Wang,XL Hou,B Yang,JC Shen,YS Li,L Jiang

DOI: https://doi.org/10.1021/la025695r

IF: 3.9

2003-01-01

Langmuir

Abstract:We have fabricated a mesoporous copolymer thin film whose surface pore size can be varied from submicrometer to micrometer. Our fabrication method requires microphase separation induced by a silicone surfactant during the rapid solvent evaporation and polymerizations. The sample films were characterized with atomic force microscopy (AFM), confocal Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), in situ infrared (IR), attenuated total reflection (ATR), and other techniques. The characterization results show that the pore size can be controlled by altering the concentration of silicone surfactant. Furthermore, the mesoporous copolymer film with hydrophobic convex and hydrophilic concave structure exhibits both hydrophobic and oleophobic properties. The unique properties can be attributed to the special heterogeneous porous structure of the polymer film. The resulting porous polymer films can be utilized in many fields, such as self-cleaning, antiadhesives, adsorption, and separation. These mesoscale-patterned surfaces can also provide a model system for investigating the interface properties of actual surfaces.
Polymer blend lithography: A versatile method to fabricate nanopatterned self-assembled monolayers

Cheng Huang,Markus Moosmann,Jiehong Jin,Tobias Heiler,Stefan Walheim,Thomas Schimmel

DOI: https://doi.org/10.3762/bjnano.3.71

IF: 3.1

2012-09-04

Beilstein Journal of Nanotechnology

Abstract:A rapid and cost-effective lithographic method, polymer blend lithography (PBL), is reported to produce patterned self-assembled monolayers (SAM) on solid substrates featuring two or three different chemical functionalities. For the pattern generation we use the phase separation of two immiscible polymers in a blend solution during a spin-coating process. By controlling the spin-coating parameters and conditions, including the ambient atmosphere (humidity), the molar mass of the polystyrene (PS) and poly(methyl methacrylate) (PMMA), and the mass ratio between the two polymers in the blend solution, the formation of a purely lateral morphology (PS islands standing on the substrate while isolated in the PMMA matrix) can be reproducibly induced. Either of the formed phases (PS or PMMA) can be selectively dissolved afterwards, and the remaining phase can be used as a lift-off mask for the formation of a nanopatterned functional silane monolayer. This “monolayer copy” of the polymer phase morphology has a topographic contrast of about 1.3 nm. A demonstration of tuning of the PS island diameter is given by changing the molar mass of PS. Moreover, polymer blend lithography can provide the possibility of fabricating a surface with three different chemical components: This is demonstrated by inducing breath figures (evaporated condensed entity) at higher humidity during the spin-coating process. Here we demonstrate the formation of a lateral pattern consisting of regions covered with 1 H ,1 H ,2 H ,2 H -perfluorodecyltrichlorosilane (FDTS) and (3-aminopropyl)triethoxysilane (APTES), and at the same time featuring regions of bare SiO x . The patterning process could be applied even on meter-sized substrates with various functional SAM molecules, making this process suitable for the rapid preparation of quasi two-dimensional nanopatterned functional substrates, e.g., for the template-controlled growth of ZnO nanostructures Bauermann, L. P.; Gerstel, P.; Bill, J.; Walheim, S.; Huang, C.; Pfeifer, J.; Schimmel, T. Langmuir 2010, 26, 3774–3778. doi:10.1021/la903636k.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Processive Catalytic Polymerization via Molecularly Confined Catalyst

Jia Niu,Zefeng Zhou,Wei-Shang Lo,Gavin J. Giardino,Kanika Lalit,Wenqi Wang,Chloe Fields,Alfred Barney,Chia-Kuang Tsung,Wenyu Huang

DOI: https://doi.org/10.26434/chemrxiv-2023-n2016

2023-12-11

Abstract:Controlling the reactivity of the propagating chain end in polymerization reactions is crucial for achieving well-defined polymers in both synthetic polymer chemistry1,2 and biology3. Processive enzymes in nature have evolved substrate-enclosing structures to protect the catalytic center from reaccess by the nascent polymer4. However, substrate enclosure has not been adopted in polymer chemistry for improving catalytic processivity. Here, we present a strategy for processive catalytic polymerization by encapsulating catalysts for ring-opening metathesis polymerization (ROMP) into the sub-surface cages of a metal-organic framework. The sub-surface encapsulation of the catalysts within the framework protects the propagating polymer chain end from the secondary metathesis reaction with the alkenes in the backbone of the nascent polymer, while allowing the nascent polymer to grow out of the framework with little impedance and achieve continuous chain growth. As a result, ultra-high-molecular-weight polymers with low dispersity were generated from the ROMP of low-strain cyclic olefins such as cis-cyclooctene and cyclopentene. We demonstrate that ultra-high-molecular-weight polymers with degradable backbones and enhanced mechanical and adhesive properties could be readily generated from this approach.

Chemistry
Designing mamdani type fuzzy rule using a collaborative FCM scheme

Chin-Teng Lin,M. Prasad,Jyh-Yeong Chang

DOI: https://doi.org/10.1109/IFUZZY.2013.6825450

2013-12-01

Abstract:This paper presents a new approach for generating fuzzy rules for fuzzy inference system by using collaborative fuzzy c-mean (CFCM). In order to do any mode of integration between datasets, there is a need to define the common feature between datasets by using some kind of collaborative process and also need to preserve the privacy and security at higher levels. This collaboration process gives a common structure between datasets which helps to define an appropriate number of rules for structural learning and also improve the accuracy of the system modeling. This all consideration bring the concept of collaborative fuzzy rule generation process with a quality measuring.
Creating "living" Polymer Surfaces to Pattern Biomolecules and Cells on Common Plastics.

Chunyan Li,Andrew Glidle,Xiaofei Yuan,Zhixiong Hu,Ellie Pulleine,Jon Cooper,Wantai Yang,Huabing Yin

DOI: https://doi.org/10.1021/bm4000597

2013-01-01

Biomacromolecules

Abstract:Creating patterns of biomolecules and cells has been applied widely in many fields associated with the life sciences, including diagnostics. In these applications it has become increasingly apparent that the spatiotemporal arrangement of biological molecules in vitro is important for the investigation of the cellular functions found in vivo. However, the cell patterning techniques often used are limited to creating 2D functional surfaces on glass and silicon. In addition, in general, these procedures are not easy to implement in conventional biological laboratories. Here, we show the formation of a living poly(ethylene glycol) (PEG) layer that can be patterned with visible light on plastic surfaces. This new and simple method can be expanded to pattern multiple types of biomolecule on either a previously formed PEG layer or a plastic substrate. Using common plastic wares (i.e., polyethylene films and polystyrene cell culture Petri-dishes), we demonstrate that these PEG-modified surfaces have a high resistance to protein adsorption and cell adhesion, while at the same time, being capable of undergoing further molecular grafting with bioactive motifs. With a photomask and a fluid delivery system, we illustrate a flexible way to immobilize biological functions with a high degree of 2D and 3D spatial control. We anticipate that our method can be easily implemented in a typical life science laboratory (without the need for specialized lithography equipment) offering the prospect of imparting desirable properties to plastic products, for example, the creation of functional microenvironments in biological studies or reducing biological adhesion to surfaces.
Micropattern Fabricated by Acropetal Migration Controlled through Sequential Photo and Thermal Polymerization

Xiaxin Gao,Jin Li,Wenqiang Yuan,Shuzhen Yan,Xiaodong Ma,Tiantian Li,Xuesong Jiang

DOI: https://doi.org/10.1002/smll.202403099

IF: 13.3

Small

Abstract:Bottom-up patterning technology plays a significant role in both nature and synthetic materials, owing to its inherent advantages such as ease of implementation, spontaneity, and noncontact attributes, etc. However, constrained by the uncontrollability of molecular movement, energy interaction, and stress, obtained micropatterns tend to exhibit an inevitable arched outline, resulting in the limitation of applicability. Herein, inspired by auxin's action mode in apical dominance, a versatile strategy is proposed for fabricating precision self-organizing micropatterns with impressive height based on polymerization-induced acropetal migration. The copolymer containing fluorocarbon chains (low surface energy) and tertiary amine (coinitiator) is designed to self-assemble on the surface of the photo-curing system. The selective exposure under a photomask establishes a photocuring boundary and the radicals would be generated on the surface, which is pivotal in generating a vertical concentration difference of monomer. Subsequent heating treatment activates the material continuously transfers from the unexposed area to the exposed area and is accompanied by the obviously vertical upward mass transfer, resulting in the manufacture of a rectilinear profile micropattern. This strategy significantly broadens the applicability of self-organizing patterns, offering the potential to mitigate the complexity and time-consuming limitations associated with top-down methods.
Nanoimprint Lithography and Surface Modification As Prospective Technologies for Heterogeneous Integration

N. Kehagias,W. Hu,V. Reboud,N. Lu,B. Dong,L. Chi,H. Fuchs,A. Genua,J. A. Alduncin,J. A. Pomposo,D. Mecerreyes,C. M. Sotomayor Torres

DOI: https://doi.org/10.1002/pssc.200780226

2008-01-01

Abstract:Nanoimprint lithography offers the possibility to pattern wafer-scale surfaces with nm-sized structures in polymers reaching the 10 nm lateral size. Printable polymers can be tailored to have a surface upon which molecules self-assemble. Furthermore, the resulting surfaces may be heterogeneously structured with or without etching away parts of imprinted polymers, in order to provide a flexible platform for structured surfaces with functional materials. We review progress in these combined approaches and discuss three examples: (a) a process to modify printed surfaces in order to grow polymer brushes, (b) a technique to realise patterned surfaces with different emission colours by using a one-step gas phase deposition of a single type of molecules on pre-patterened solid substrates and (c) a general method suitable to pattern different conducting polymer species at the nanoscale range by combining nanoimprint lithography process ad a lift-off process.
Engineering live cell surfaces with functional polymers via cytocompatible controlled radical polymerization

Jia Niu,David J. Lunn,Anusha Pusuluri,Justin I. Yoo,Michelle A. O'Malley,Samir Mitragotri,H. Tom Soh,Craig J. Hawker

DOI: https://doi.org/10.1038/nchem.2713

IF: 24.274

2017-01-30

Nature Chemistry

Abstract:The capability to graft synthetic polymers onto the surfaces of live cells offers the potential to manipulate and control their phenotype and underlying cellular processes. Conventional grafting-to strategies for conjugating preformed polymers to cell surfaces are limited by low polymer grafting efficiency. Here we report an alternative grafting-from strategy for directly engineering the surfaces of live yeast and mammalian cells through cell surface-initiated controlled radical polymerization. By developing cytocompatible PET-RAFT (photoinduced electron transfer-reversible addition-fragmentation chain-transfer polymerization), synthetic polymers with narrow polydispersity (Mw/Mn < 1.3) could be obtained at room temperature in 5 minutes. This polymerization strategy enables chain growth to be initiated directly from chain-transfer agents anchored on the surface of live cells using either covalent attachment or non-covalent insertion, while maintaining high cell viability. Compared with conventional grafting-to approaches, these methods significantly improve the efficiency of grafting polymer chains and enable the active manipulation of cellular phenotypes.

chemistry, multidisciplinary
Fabrication of Self‐Wrinkling Polymer Films with Tunable Patterns through an Interfacial‐Fuming‐Induced Surface Instability Process

Yi‐Chen Chen,Ying‐Wei Luo,Ching‐Yu Huang,Yan‐Lin Li,Ting‐Lun Chen,Ting‐Yu Xu,Han‐Yu Hsueh

DOI: https://doi.org/10.1002/smll.202311679

IF: 13.3

2024-01-22

Small

Abstract:Inspired by the superglue fuming method for fingerprint collection, this study developed a novel interfacial‐fuming‐induced surface instability process to generate wrinkled patterns on polymeric substrates. The aforementioned technique can be easily applied to architectures with complex outer morphologies and inner surfaces, thereby enabling the construction of surface patterns under ambient conditions without vacuum limitations or precise process control. Inspired by the superglue fuming method for fingerprint collection, this study developed a novel interfacial‐fuming‐induced surface instability process to generate wrinkled patterns on polymeric substrates. High‐electronegativity groups are introduced on the substrate surface to initiate the polymerization of monomer vapors, such as ethyl cyanoacrylate, which results in the formation of a stiff poly(ethyl cyanoacrylate) capping layer. Moreover, interfacial polymerization resulted in the covalent bonding of the substrate, which led to the volumetric shrinkage of the composite and the accumulation of compressive strain. This process ultimately resulted in the development and stabilization of wrinkled surface morphologies. The authors systematically examined parameters such as the modulus of the epoxy substrate, prestrain, the flow rate of fuming, and operating temperature. The aforementioned technique can be easily applied to architectures with complex outer morphologies and inner surfaces, thereby enabling the construction of surface patterns under ambient conditions without vacuum limitations or precise process control. This study is the first to combine fuming‐induced interfacial polymerization with surface instability to create robust wrinkles. The proposed method enables the fabrication of intricate microwrinkled patterns and has considerable potential for use in various practical applications, including microfluidics, optical components, bioinspired adhesive devices, and interfacial engineering.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Ultrasmooth Polydopamine Modified Surfaces for Block Copolymer Nanopatterning on Flexible Substrates

Joon Hee Cho,Reika Katsumata,Sunshine X. Zhou,Chae Bin Kim,Austin R. Dulaney,Dustin W. Janes,Christopher J. Ellison

DOI: https://doi.org/10.1021/acsami.6b00626

2016-03-11

Abstract:Nature has engineered universal, catechol-containing adhesives which can be synthetically mimicked in the form of polydopamine (PDA). In this study, PDA was exploited to enable the formation of block copolymer (BCP) nanopatterns on a variety of soft material surfaces. While conventional PDA coating times (1 h) produce a layer too rough for most applications of BCP nanopatterning, we found that these substrates could be polished by bath sonication in a weakly basic solution to form a conformal, smooth (root-mean-square roughness ∼0.4 nm), and thin (3 nm) layer free of large prominent granules. This chemically functionalized, biomimetic layer served as a reactive platform for subsequently grafting a surface neutral layer of poly(styrene-random-methyl methacrylate-random-glycidyl methacrylate) to perpendicularly orient lamellae-forming poly(styrene-block-methyl methacrylate) BCP. Moreover, scanning electron microscopy observations confirmed that a BCP nanopattern on a poly(ethylene terephthalate) substrate was not affected by bending with a radius of ∼0.5 cm. This procedure enables nondestructive, plasma-free surface modification of chemically inert, low-surface energy soft materials, thus overcoming many current chemical and physical limitations that may impede high-throughput, roll-to-roll nanomanufacturing.

materials science, multidisciplinary,nanoscience & nanotechnology
Simultaneous Spin Coating and Ring-Opening Metathesis Polymerization for the Rapid Synthesis of Polymer Films

Zane J. Parkerson,Liudmyla Prozorovska,Matthew P. Vasuta,Tyler D. Oddo,G. Kane Jennings

DOI: https://doi.org/10.1021/acsami.4c00211

IF: 9.5

2024-03-23

ACS Applied Materials & Interfaces

Abstract:We report a highly controlled technique for the synthesis of polymer films atop a substrate by combining spin coating with ring-opening metathesis polymerization (ROMP), herein termed spin coating ROMP (scROMP). The scROMP approach combines polymer synthesis and deposition into one process, fabricating films of up to 36 cm2 in under 3 min with orders-of-magnitude reduction in solvent usage. This method can convert numerous norbornene-type molecules into homopolymers and random copolymers as...

materials science, multidisciplinary,nanoscience & nanotechnology
Surface Imprinting in Layer-by-Layer Nanostructured Films

F. Shi,Z. Liu,G.-L. Wu,M. Zhang,H. Chen,Z. Q. Wang,X. Zhang,I. Willner

DOI: https://doi.org/10.1002/adfm.200700267

IF: 19

2007-01-01

Advanced Functional Materials

Abstract:In this Full Paper, we develop a novel approach for the generation of stable molecularly imprinted sites in polymeric films by combining the layer-by-layer (LbL) technique and photochemical crosslinking of the layered structure. After photo-crosslinking, the imprinted films show high reproducibility and rapid loading and unloading of imprinted sites by the template molecules. Moreover, the competitive adsorption of template molecules and redox labels into the imprinted film using electrochemical methods indicates that the imprinted film has higher affinity for template molecules. We believe this approach may have some advantages over traditional ways of preparing imprinted sites in polymer matrices and it may open a new avenue for the functionalization of LbL films.
Solid-Phase Microcontact Printing for Precise Patterning of Rough Surfaces: Using Polymer-Tethered Elastomeric Stamps for the Transfer of Reactive Silanes

Pinar Akarsu,Richard Grobe,Julius Nowaczyk,Matthias Hartlieb,Stefan Reinicke,Alexander Böker,Marcel Sperling,Martin Reifarth,Alexander Böker

DOI: https://doi.org/10.1021/acsapm.1c00024

2021-04-07

ACS Applied Polymer Materials

Abstract:We present a microcontact printing (μCP) routine suitable to introduce defined (sub-) microscale patterns on surface substrates exhibiting a high capillary activity and receptive to a silane-based chemistry. This is achieved by transferring functional trivalent alkoxysilanes, such as (3-aminopropyl)-triethoxysilane (APTES) as a low-molecular weight ink via reversible covalent attachment to polymer brushes grafted from elastomeric polydimethylsiloxane (PDMS) stamps. The brushes consist of poly{N-[tris(hydroxymethyl)-methyl]acrylamide} (PTrisAAm) synthesized by reversible addition-fragmentation chain-transfer (RAFT)-polymerization and used for immobilization of the alkoxysilane-based ink by substituting the alkoxy moieties with polymer-bound hydroxyl groups. Upon physical contact of the silane-carrying polymers with surfaces, the conjugated silane transfers to the substrate, thus completely suppressing ink-flow and, in turn, maximizing printing accuracy even for otherwise not addressable substrate topographies. We provide a concisely conducted investigation on polymer brush formation using atomic force microscopy (AFM) and ellipsometry as well as ink immobilization utilizing two-dimensional proton nuclear Overhauser enhancement spectroscopy (1H-1H-NOESY-NMR). We analyze the μCP process by printing onto Si-wafers and show how even distinctively rough surfaces can be addressed, which otherwise represent particularly challenging substrates.

polymer science,materials science, multidisciplinary

[Bromocriptine, lactation inhibition and drug monitoring].

Synthesis of Polymer Thin Film Gradient with Nanometer Thickness through Water Diffusion Controlled Surface Polymerization

Recent progress in non-photolithographic patterning of polymer thin films

Controlled Grafting of Well-Defined Polymers on Hydrogen-Terminated Silicon Substrates by Surface-Initiated Atom Transfer Radical Polymerization

Photocatalytic Surface Initiation for Area-Selective Chemical Vapor Deposition of Polymer Thin Film

Chemical Modification on Top of Nanotopography to Enhance Surface Properties of PDMS

Multifunctional Photodegradable Polymers for Reactive Micropatterns

A Facile Method of Forming Nanoscale Patterns on Poly(ethylene Glycol)-Based Surfaces by Self-Assembly of Randomly Grafted Block Copolymer Brushes.

Controlling Pore Size and Wettability of A Unique Microheterogeneous Copolymer Film with Porous Structure

Polymer blend lithography: A versatile method to fabricate nanopatterned self-assembled monolayers

Processive Catalytic Polymerization via Molecularly Confined Catalyst

Designing mamdani type fuzzy rule using a collaborative FCM scheme

Creating "living" Polymer Surfaces to Pattern Biomolecules and Cells on Common Plastics.

Micropattern Fabricated by Acropetal Migration Controlled through Sequential Photo and Thermal Polymerization

Nanoimprint Lithography and Surface Modification As Prospective Technologies for Heterogeneous Integration

Engineering live cell surfaces with functional polymers via cytocompatible controlled radical polymerization

Fabrication of Self‐Wrinkling Polymer Films with Tunable Patterns through an Interfacial‐Fuming‐Induced Surface Instability Process

Ultrasmooth Polydopamine Modified Surfaces for Block Copolymer Nanopatterning on Flexible Substrates

Simultaneous Spin Coating and Ring-Opening Metathesis Polymerization for the Rapid Synthesis of Polymer Films

Surface Imprinting in Layer-by-Layer Nanostructured Films

Solid-Phase Microcontact Printing for Precise Patterning of Rough Surfaces: Using Polymer-Tethered Elastomeric Stamps for the Transfer of Reactive Silanes