Abstract:Rapid progress achieved on perovskite solar cells raises the expectation for their further development toward practical applications. Moisture sensitivity of perovskite materials is one of the major obstacles which limits the long-term durability of the perovskite solar cells, especially in outdoor operation where rainfall and water accumulation on the solar panels often occur. Micro/nanopinholes within the functional layers of the devices usually lead to water vapor penetration, thus subsequent decomposition of perovskites, and finally poor device performance and shortened operational lifetime. In this work, low-temperature atomic layer deposition (ALD) technique was utilized to incorporate pinhole-free metal oxide layers (TiO2 and Al2O3) into an inverted perovskite solar cell consisting of indium tin oxide/NiO/perovskite/PC61BM/TiO2/Ag. The interface properties between the inserted TiO2 layer and the perovskite layer were investigated by X-ray photoelectron spectroscopy. The results showed that TiO2 ALD fabrication process had made negligible degradation to the perovskite layer. The TiO2 layer can significantly reduce interfacial charge recombination loss, improve interfacial contact, and enhance water resistance. A maximum power conversion efficiency (PCE) of 18.3% was achieved for devices with TiO2 interface layers. A stacked Al2O3 encapsulation layer was designed and deposited on top of the devices to further improve device stability under harsh environmental conditions. The encapsulated devices with the best performance retained 97% of the initial PCE after being stored in ambient condition for a thousand hours. They also showed great water resistance, and no significant degradation in terms of PCE and photocurrent of the devices was observed after they were immersed in deionized water for as long as 2 h. Our approach offers a promising way of developing highly efficient and stable perovskite solar cells under real-world operational conditions.

An Interlayer with Strong Pb-Cl Bond Delivers Ultraviolet-Filter-Free, Efficient, and Photostable Perovskite Solar Cells

UV-robust and efficient perovskite solar cells enabled by interfacial photocatalysis suppression and defect passivation

UV‐Inert ZnTiO3 Electron Selective Layer for Photostable Perovskite Solar Cells

Strong-bonding hole-transport layers reduce ultraviolet degradation of perovskite solar cells

Ultraviolet Filtration Passivator for Stable High-Efficiency Perovskite Solar Cells

Impermeable Inorganic Walls Sandwiching Photoactive Layer toward Inverted Perovskite Solar and Indoor-Photovoltaic Devices

Impermeable inorganic “walls” sandwiching perovskite layer toward inverted and indoor photovoltaic devices

Tri-functionalized TiO Cl4-2 accessory layer to boost efficiency of hole-free, all-inorganic perovskite solar cells

Multifunctional Metal‐organic Frameworks Capsules Modulate Reactivity of Lead Iodide toward Efficient Perovskite Solar Cells with Ultraviolet Resistance

Synergistic Passivation and Down‐Conversion by Imidazole‐Modified Graphene Quantum Dots for High Performance and UV‐Resistant Perovskite Solar Cells

High‐Efficiency and Stable Perovskite Solar Cells via Buried Interface Modification with Multi‐Functional Phosphorylcholine Chloride

Suppressing Charge Recombination and Ultraviolet Light Degradation of Perovskite Solar Cells Using Silicon Oxide Passivation

A Semitransparent Inorganic Perovskite Film for Overcoming Ultraviolet Light Instability of Organic Solar Cells and Achieving 14.03% Efficiency

Tin Oxide Bilayer as Effective Electron Transport Layers for Efficient and Stable Perovskite Solar Modules

Deep‐Ultraviolet Photoactivation‐Assisted Contact Engineering Toward High‐Efficiency and Stable All‐Inorganic CsPbI 2 Br Perovskite Solar Cells

Intermediate Phase Modification Enables High‐Performance Iodine‐Rich Inorganic Perovskite Solar Cells with 3000‐Hour Stability

Hydrothermal Deposition of UV‐Absorbing Passivation Layers for Efficient and Stable Perovskite Solar Cells

Efficient and stable perovskite solar cells fabrication in open air through adopting a dye interlayer

Low-Temperature Atomic Layer Deposition of Metal Oxide Layers for Perovskite Solar Cells with High Efficiency and Stability under Harsh Environmental Conditions

Robust chelated lead octahedron surface for efficient and stable perovskite solar cells

Halogen Radical‐Activated Perovskite‐Substrate Buried Heterointerface for Achieving Hole Transport Layer‐Free Tin‐Based Solar Cells with Efficiencies Surpassing 14%