Abstract:<p>Rapid solidification cellular structures are known to play a crucial role in helping achieve high strength and high ductility in 316L austenitic stainless steels fabricated by laser powder-bed-fusion (L-PBF). Despite this, the understanding of their intrinsic characteristics (e.g., crystallographic orientations, dislocations, precipitates, elemental segregations) and the respective impacts on the material's strength and thermal stability remains nebulous. We conduct several dedicated transmission electron microscopy (TEM) studies to investigate these strengthening mechanisms and identified that cell walls follow specific crystallographic orientations. The high density of tangled dislocations inside cell walls are found to have a higher tendency to dissociate, forming wider stacking faults while oxide precipitates are confined inside cell walls. These features act as barriers to moving dislocations upon plastic deformation and contribute to the high strength. Our dislocation dynamic simulations indicate that segregated particles are effective in blocking dislocations locally, helping the formation of dislocation cells and participating to the material strengthening. To study the thermal stability of L-PBF 316L SS, we perform systematic post-processing heat treatments from 400-1200°C. Microstructure characterizations using electron backscatter diffraction, TEM, and synchrotron X-ray diffraction coupled with dislocation dynamics and CALPHAD simulations and tensile testing reveal three heat treatment zones where the structure-property relationship can be tuned. After annealing up to 600°C, the microstructure remains stable; but the work hardening behavior is altered with a material that retains high strength and high ductility. Annealing between 600-1000°C activates elemental diffusion and gradual disappearance of cell walls, leading to a sharp drop in yield strength and a tradeoff between strength and ductility. Low-angle grain boundaries remain stable up to 1000°C while the average grain size defined by high angle grain boundaries is near constant at annealing temperatures up to 800°C. Annealing above 1100°C removes all L-PBF microstructure footprints and renders a conventional-like microstructure. Compared to conventional materials, L-PBF 316LSS displays substantially higher thermal stability and superior performance at elevated temperatures.</p>

Effect of δ-Ferrite Formation and Self-Tempering Behavior on Mechanical Properties of Type 410 Martensitic Stainless Steel Fabricated via Laser Powder Bed Fusion

Unveiling the Cellular Microstructure–property Relations in Martensitic Stainless Steel Via Laser Powder Bed Fusion

Microstructural Evolution and Strengthening Mechanism in Laser Powder Bed Fusion 316L Stainless Steel with High Strength and Ductility

Tailoring the Microstructural and Mechanical Properties of 316L Stainless Steel Manufactured by Laser Powder Bed Fusion

Deformation-Induced Strengthening Mechanism in a Newly Designed L-40 Tool Steel Manufactured by Laser Powder Bed Fusion

Influence of post-processing heat-treatment on the mechanical performance of AISI 410L stainless steel manufactured by the L-DED process

New insights on cellular structures strengthening mechanisms and thermal stability of an austenitic stainless steel fabricated by laser powder-bed-fusion

Comprehensive Investigation of the Mechanical Properties of 316L Stainless Steel Processed via Laser Powder Bed Fusion

Effect of Laser Powder Bed Fusion Parameters on the Evolution of Melt Pool, Densification, Microstructure, and Hardness in 420 Stainless Steel Parts

Fatigue and tensile deformation behaviors of laser powder bed fused 304L austenitic stainless steel

Microstructure Evolution and Mechanical Properties of AISI 430 Ferritic Stainless Steel Strengthened Through Laser Carburization

Investigation of Microstructures and Tensile Properties of 316L Stainless Steel Fabricated via Laser Powder Bed Fusion

Evolution of microstructure and mechanical properties in 2205 duplex stainless steels during additive manufacturing and heat treatment

Exploring structural origins responsible for the exceptional mechanical property of additively manufactured 316L stainless steel via in-situ and comparative investigations

Synergetic Effects of Ferrite Content and Tempering Temperature on Mechanical Properties of a 960 MPa Grade HSLA Steel

Microstructure and mechanical characterization of additively manufactured Fe11Cr8Ni5Co3Mo martensitic stainless steel

Effects of laser additive manufacturing on microstructure and crystallographic texture of austenitic and martensitic stainless steels

Achieving Ultrahigh Yield Strength and Decent Toughness in an In-Situ Alloyed H13 Steel Via Laser Powder Bed Fusion

Influence of solidification structure on austenite to martensite transformation in additively manufactured hot-work tool steels

Influence of the Processing Parameters on the Microstructure and Mechanical Properties of 316L Stainless Steel Fabricated by Laser Powder Bed Fusion

Response of laser power bed fusion manufactured austenitic stainless steel towards combined heat treatment and low-temperature thermochemical surface strengthening