Abstract:A portable and low-cost miniaturized analysis system was proposed, in which microchip electrophoresis (MCE) and chemiluminescence (CL) were used as the separation and detection units, respectively. A porous monolithic plug was created in the separation channel of the microchip as a select valve, which prevented the pressure-driven CL reagents flowing back into the separation channel but allowed electrophoretic migration along the separation channel. The sensitivity was greatly enhanced by improving the mixing efficiency using a spiral detection channel with an increased length facing the photomultiplier tube (PMT). Peak width could be significantly reduced by increasing the flow rate of CL reagents. Putting grounding electrode before the detection channel significantly improved the reproducibility. A simple and compact subatmospheric pressure fluid-driven device was developed for manipulating the whole analytical process, including variable-volume sample loading, electrophoretic separation and CL reagents transportation. All miniaturized components for constructing a portable MCE-CL system are commercially available. This approach considerably simplified the operation and equipments for constructing an efficient MCE-CL system. Nine metal cations, such as Cr(III), Co(II), Cu(II), Ni(II), Au(III), Mn(II), Zn(II), Pt(II), Pb(II) were successfully separated within 200 s. Migration time precisions ranging from 0.39% for Cr(III) to 2.1% for Cu(II) were obtained for ten consecutive determinations with peak height precisions from 1.67% for Co(II) to 5.73% for Pb(II). Detection limits ranging from 7.5 x 10(-11) mol L(-1) for Co(II) to 8.3 x 10(-9) mol L(-1) for Pb(II) were achieved, which were about three orders lower than the present MCE-CL system. It has been applied for the determination of metals in tea. The results with the recoveries from 97.0% to 102.3% proved that the proposed MCE-CL system offers a number of benefits including miniaturization, high sensitivity and better resolution.

Multichannel separation device with parallel electrochemical detection

Smartphone-based integrated voltammetry system for simultaneous detection of ascorbic acid, dopamine, and uric acid with graphene and gold nanoparticles modified screen-printed electrodes

3D-Printed Microfluidic Device with In-line Amperometric Detection that Also Enables Multi-Modal Detection

A high-performance polycarbonate electrophoresis microchip with integrated three-electrode system for end-channel amperometric detection.

A Compact and Low-Cost Miniaturized Analysis System Composed of Microchip Electrophoresis and Chemiluminescence Detection Manipulated by a Simple Subatmospheric Pressure Fluid-Driven Device

Convenient Enantioseparation by Monolithic Imprinted Capillary Clamped in a Chip with Electrochemical Detection

Design of novel, simple, and inexpensive 3D printing-based miniaturized electrochemical platform containing embedded disposable detector for analytical applications

The Use of Poly(dimethylsiloxane) Surface Modification with Gold Nanoparticles for the Microchip Electrophoresis.

Design and implementation of an array of micro-electrochemical detectors for two-dimensional liquid chromatography--proof of principle

Microchip Capillary Electrophoresis With An End-Channel Amperometric Detector And Its Preliminary Application

Simultaneous multiple enantioseparation with a one-pot imprinted microfluidic channel by microchip capillary electrochromatography.

Electrophoretic microchip with dual-opposite injection for simultaneous measurements of anions and cations.

Multi-Channel Microfluidic Chip Coupling With Mass Spectrometry For Simultaneous Electro-Sprays And Extraction

Microchip Separation and Electrochemical Detection of Amino Acids and Peptides Following Precolumn Derivatization with Naphthalene-2,3-dicarboxyaldehyde

Capillary Electrophoresis Microchip Coupled with On-Line Chemiluminescence Detection

Use of 3D printing to integrate microchip electrophoresis with amperometric detection

Fabrication and Performance of A Three-Dimensionally Adjustable Device for the Amperometric Detection of Microchip Capillary Electrophoresis

An End-Channel Amperometric Detector for Microchip Capillary Electrophoresis

A decoupler-free simple paper microchip capillary electrophoresis device for simultaneous detection of dopamine, epinephrine and serotonin

A 3D printed dual screen-printed electrode separation device for twin electrochemical mini-cell establishment

A capillary-PDMS hybrid chip for separations-based sensing of neurotransmitters in vivo