Abstract:Most of the super hydrophobic paper surfaces prepared at present will change the original properties of the paper and can not be used for oil-water separation continuously. There is not yet much systematic research on super hydrophobic modification of paper-based materials. The use of polymers and inorganic fillers for synergistic modification is also relatively rare. In this paper, fluorine-containing epoxy polymer P(GMA-r-DFMA) and KH550 modified nano-SiO2 were mixed to obtain an organic-inorganic hybrid super hydrophobic solution, which was chemically cross-linked to the surface of paper fibers to form a micro- and nano-thin coating to construct a super hydrophobic surface, but the original properties of the paper remain unchanged. The optimal parameters (polymer concentration, soaking time, drying time, drying temperature) for building super hydrophobic surface on paper were explored, and the optimal conditions are the polymer concentration of 7 mg/mL, soaking time of 5 h, drying time of 6 h, drying temperature of 100 °C. Under the optimum conditions, the water contact angle of the modified paper surface is 164 ± 2o and the water rolling angle is 5 ± 2o. The surface of the super hydrophobic modified paper contaminated with toner can be self-cleaned by water droplets. Compared with the unmodified paper, the whiteness, smoothness and glossiness of the surface of the super hydrophobic modified paper have not changed greatly. When the oils were n-hexane, n-octane and trichloromethane, the oil-water separation efficiency of the modified paper could reach 99.9 %, 99.9 % and 98 %, and the effects were stable. Super hydrophobic modified paper in water formed a large number of bubbles on its surface, resulting in silver mirror phenomenon. SEM results showed that the pore structure of the paper was not changed after modification. The surface of the original paper fiber is very smooth, but the surface of the super hydrophobic modified paper fiber has a large number of micro and nano protrusions.

Fabrication of transparent and superhydrophobic nanopaper via coating hybrid SiO2/MWCNTs composite

Facile Method for the Preparation of Superhydrophobic Cellulosic Paper

Percolation-dominated Superhydrophobicity and Conductivity for Nanocomposite Coatings from the Mixtures of a Commercial Aqueous Silica Sol and Functionalized Carbon Nanotubes

Carbon Nanotubes Noncovalently Functionalized by an Organic-Inorganic Hybrid: New Building Blocks for Constructing Superhydrophobic Conductive Coatings

Nonaligned carbon nanotubes partially embedded in polymer matrixes: a novel route to superhydrophobic conductive surfaces.

Design and Synthesis of a Robust and Multifunctional Superhydrophobic Coating with a Three-Dimensional Network Structure on a Paper-Based Material

Multifunctional and fluorine-free superhydrophobic composite coating based on PDMS modified MWCNTs/ZnO with self-cleaning, oil-water separation, and flame retardant properties

Cellulose nanofiber assisted dispersion of hydrophobic SiO2 nanoparticles in water and its superhydrophobic coating

A Simple Method For Preparing Superhydrophobic Self-Cleaning Paper By Spraying Nanoparticle Suspension

Superhydrophobic, strong and transparent paper made from cellulosic fibers

Preparation of superhydrophobic conductive CNT/PDMS film on paper by foam spraying method

Fabrication and research of superhydrophobic paper for oil-water separation

Superhydrophobic paper fabricated via nanostructured titanium dioxide-functionalized wood cellulose fibers

Facile Fabrication of Superhydrophobic Nanocomposite Coatings Based on Water‐Based Emulsion Latex

Facile preparation of pliable superamphiphobic papers with high and durable liquid repellency for anti-corrosion and open surface microfluidics

Flexible biomimetic materials with excellent photothermal performance and superhydrophobicity

Facile preparation of economical, eco-friendly superhydrophobic surface on paper substrate with excellent mechanical durability

Construction of super hydrophobic paper by modified nano-SiO2 hybrid medium fluoro-epoxy polymer and its properties

Multifunctional coatings fabricated from Chinese hemp–derived superhydrophobic micro–nanocellulose

PDMS-Based Hierarchical Superhydrophobic Fabric Coating Fabricated by Thermal Treatment and Electrostatic Flocking Technology

Robust, Transparent, and Superhydrophobic Coating Fabricated with Waterborne Polyurethane and Inorganic Nanoparticle Composites