Abstract:The study effectively optimized the transesterification process of Jatropha oil to fatty acid methyl ester using response surface methodology (CCD) and Taguchi orthogonal method, leading to enhanced efficiency and product quality. The optimization of five process parameters was conducted to predict the biodiesel yield (%) from the transesterification of Jatropha oil. The procedure was made easier with the use of a nanocatalyst made from calcium oxide obtained from snail shells using the hydrothermal technique. The RSM approach yielded an optimal FAME of 94.10% under specific conditions: a methanol to oil ratio of 5 : 1, catalyst weight of 1.5 w/w, reaction temperature of 50 °C, reaction duration of 45 minutes, and an agitation speed of 250 rpm across 32 experimental trials. On the other hand, the Taguchi method predicted a higher FAME yield of 86.36% using specific operational parameters. These parameters included a methanol to oil ratio of 4 : 1, catalyst weight of 0.5 w/w, reaction temperature of 60 °C, reaction duration of 25 minutes, and an agitation speed of 200 rpm. These parameters were determined through 16 experimental trials. The RSM technique yielded impressive results with a determined coefficient of determination ( R 2 ) of 0.9943, adjusted R 2 of 0.9838, predicted R 2 of 0.8470, and a coefficient of variance (CV) of 0.65. On the other hand, the Taguchi method had coefficients of 0.8994, 0.7483, and 1.95. The FAME yield of RSM was slightly higher, but the Taguchi method was much more cost-efficient. The analysis of variance (ANOVA) results showed that the methanol to oil ratio had the highest influence on the yield, accounting for 49.61% of the variation. This highlights the significant impact of this factor on the overall process. The study highlights the significance of utilizing advanced techniques such as TOA and RSM, which are known for their effectiveness. The study aims to enhance the yield and efficiency of the transesterification process, thereby increasing the overall production of fatty acid methyl ester from Jatropha oil. This innovative approach efficiently generates biodiesel from renewable resources, like Jatropha oil, in a manner that is both environmentally friendly and maximizes the effectiveness of the process parameters.

Multi-response optimization of transesterification parameters of mahogany seed oil using grey relational analysis in Taguchi method for quenching application

Optimization of Extraction Technology for Total Flavones from Metasequoia by Response Surface Methodology

Simulation-Based Multiobjective Optimization Of The Product Separation Process Within An Mtp Plant

Modeling and optimization of transesterification of Jatropha oil to fatty acid methyl ester: application of response surface methodology (CCD) and Taguchi orthogonal method

Transesterification of Methyl Oleate for Sustainable Production of Biolubricant: Process Optimization and Kinetic Study

Multi-response and multi-criteria decision-making optimization of transesterification reaction for biodiesel production based on critic weight determination method

Optimization of heat treatment parameters of medium carbon steel quenched in different media using Taguchi method and grey relational analysis

Multi-objective optimization of a novel crude lipase-catalyzed fatty acid methyl ester (FAME) production using low-order polynomial and Kriging models

Data on the derived mesoporous based catalyst for the synthesized of fatty acid methyl ester (FAME) from ternary oil blend: An optimization approach

Multi-objective optimization of a diesel engine fueled with different fuel types containing additives using grey-based Taguchi approach

Biodiesel production and exploring properties of Datura stramonium L. oil with its optimization using combined approaches—Taguchi, grey relational analysis, and response surface methodology

Fatty acid methyl ester production from acid oil using silica sulfuric acid: Process optimization and reaction kinetics

Parameters Optimization of Palm Oil Biodiesel Production at Various CaO Concentrations Using Response Surface Methodology

Optimization of Pretreatment for Concentrating Natural Tocopherols by Response Surface Methodology

Multi-objective Performance Optimization of Compression Ignition Engine Operated on Mangifera Indica Biodiesel by Applying Taguchi Grey Relational Analysis

Optimisation, experimental validation and thermodynamic study of the sequential oil extraction and biodiesel production processes from seeds of Sterculia foetida

Ultrasound-assisted process optimization and tribological characteristics of biodiesel from palm-sesame oil via response surface methodology and extreme learning machine - Cuckoo search

Optimization Of Process Parameters For Extraction Of Descurainia Sophia Seed Oil With Response Surface Methodology

Optimization of immobilized lipase catalyzed transesterification of cottonseed oil for biodiesel production using response surface methodology

Co-solvents transesterification of cotton seed oil into biodiesel: Effects of reaction conditions on quality of fatty acids methyl esters

Multi-Objective Optimization and Multi-Criteria Decision-Making Approach to Design Multi-Tubular Packed-Bed Membrane Reactor in Oxidative Dehydrogenation of Ethane