Abstract:Using single metal salts of zirconium, lanthanum, and iron as raw materials and sodium alginate as a cross-linking agent, a new composite adsorbent was prepared via the co-precipitation method and embedding immobilization technology, and its phosphorus adsorption performance in wastewater was evaluated. Scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD), and X-ray photoelectron spectroscopy (XPS) were used for characterization, and a 0.5 mol·L−1 sodium hydroxide solution was used to regenerate the adsorbent. The experimental results demonstrated that the adsorption rate reached 99.88% when the wastewater volume was 50 mL, the initial concentration of phosphorus-containing wastewater was 5 mg·L−1, the pH was 5, the dosage of composite adsorbent was 0.2 g, and the adsorption time was 200 min. The prepared adsorbent could reduce the initial phosphorus concentration of 5 mg·L−1 to 0.006 mg·L−1 in simulated wastewater, and from 4.17 mg·L−1 in urban sewage to undetected (<0.01 mg·L−1), thus meeting the discharge requirements of the grade A standard of the Urban Sewage Treatment Plant Pollutant Discharge Standard (GB18918-2002). The adsorption process conformed to the Freundlich adsorption isothermal equation and quasi-second-order kinetic equation, and the adsorption reaction was exothermic and spontaneous. More importantly, after three lye regeneration tests, the removal rate of phosphorus in water remained above 68%, that is, the composite adsorbent could be reproducibly fabricated and recycled. The characterization results showed that the surface of the composite adsorbent was rough, with a complex pore structure. After phosphorus removal, the surface morphology of the composite adsorbent showed a similar honeycomb structure, with a P-H, P-O stretching vibration peak and a characteristic P2p peak. At the same time, the proportion of hydroxyl groups (M-OH) on the metal surface decreased after adsorption. Our findings thus demonstrate that the mechanism of phosphorus removal is mainly based on the coordination exchange reaction between phosphate and metal active sites and surface hydroxyl groups, resulting in the formation of granular phosphate deposits.

Preparation of sustainable non-combustion filler substrate from waterworks sludge/aluminum slag/gypsum/silica/maifan stone for phosphorus immobilization in constructed wetlands

Effectiveness of a novel composite filler to enhance phosphorus removal in constructed wetlands

Studies On The Phosphorus Sorption Capacity Of Substrates Used In Constructed Wetland Systems

Efficient removal of phosphorus from constructed wetlands using solidified lanthanum/aluminum amended attapulgite/biochar composite as a novel phosphorus filter

Analysis on the Removal Efficiency of Phosphorus in Some Substrates Used in Constructed Wetland Systems

Treatment of high-phosphorus load wastewater by column packed with non-burning compound filler/gravel/ceramsite: evaluation of performance and microorganism community

New process for phosphorus removal with the combination of biological medium addition and calcium hydroxyphosphate crystallization

Research progress of phosphorus adsorption by attapulgite and its prospect as a filler of constructed wetlands to enhance phosphorus removal from mariculture wastewater

Phosphorus Adsorption Capacity of Filter Media in Constructed Wetlands

Characteristics of Phosphorus Adsorption of Aerated Concrete in Wastewater Treatment

Enhanced phosphate removal by filler encapsulation and surface engineering using SA/PVA matrix: Fabrication optimization, adsorption behaviors and inner removal mechanism

Removal efficacy of fly ash composite filler on tailwater nitrogen and phosphorus and its application in constructed wetlands

Preparation of a novel non-burning polyaluminum chloride residue(PACR) compound filler and its phosphate removal mechanisms

Performance and mechanism of phosphorus removal by slag ceramsite filler

Study on the Feasibility and Stability of Drinking Water Treatment Sludge (dwts)@zeolite to Remove Phosphorus from Constructed Wetlands

Utilization and value-adding of waste: Fabrication of porous material from chitosan for phosphate capture and energy storage

Preparation and Phosphorus Removal Performance of Zr–La–Fe Ternary Composite Adsorbent Embedded with Sodium Alginate

Phosphorus recovery as calcium phosphate by a pellet reactor pre-treating domestic wastewater before entering a constructed wetland

Co-immobilization of clinoptilolite and nanostructured hydrated ferric-zirconium binary oxide via polyvinyl alcohol-alginate covalent cross-linking for simultaneous deep removal of aqueous low-level nitrogen and phosphorus

Phosphorus removal and recovery from water with macroporous bead adsorbent constituted of alginate-Zr4+ and PNIPAM-interpenetrated networks

Accelerated phosphorus recovery from aqueous solution onto decorated sewage sludge carbon