Abstract:The shale of the Wufeng–Longmaxi formation in the Sichuan Basin is the preferred layer for shale gas exploration in China, and its petrophysical characteristics are the key to geological and engineering sweet spot prediction. However, the characteristics and impact mechanisms of its acoustic wave velocity and elastic anisotropy are currently unclear. In this paper, the Wufeng–Longmaxi shale is taken as the research object, and the P-wave and S-wave velocities of the samples are tested under the loading and unloading processes of confining pressure. The stress sensitivity variations in parameters such as wave velocity, wave velocity ratio, and anisotropy are discussed. P-wave and S-wave anisotropy parameters are correlated under different pressure conditions. X-ray diffraction, casting thin sections, scanning electron microscopy, micron CT scanning, and other analytical techniques are used to explore the mechanisms of stress sensitivity of elastic parameters. The research results indicate that: (1) the acoustic velocities of samples from different angles are V90° > V45° > V0°, and there is a positive correlation between the wave velocity and the confining pressure. After unloading the confining pressure, irreversible plastic deformation occurs due to the closure of some microfractures in the rock core, causing the wave velocity to be higher than the initial value. (2) The stress sensitivity coefficient of the P-wave (The mean is 3.00 m·s−1·MPa−1) is higher than that of the S-wave (the mean is 1.23 m·s−1·MPa−1), and the stress sensitivity coefficient of the compacted stage (the mean is 3.02 m·s−1·MPa−1) is higher than that of the elastic stage (the mean is 1.21 m·s−1·MPa−1). (3) The anisotropy of the P-wave and S-wave is negatively correlated with the confining pressure. When the confining pressure is loaded to 65 MPa, the change rate of the P-wave anisotropy coefficient is 23%, and its stress sensitivity is higher than that of S-wave anisotropy coefficient (the change rate is 13.7%). After unloading the confining pressure, the degree of anisotropy is reduced due to the closure of some microfractures. The empirical formula of P-wave and S-wave anisotropy parameters under different pressures is established through linear regression, which can provide a reference for mutual predictions. (4) The variation in wave velocity anisotropy with stress can be divided into stress and material anisotropy, which are related to the directional arrangement of microfractures and clay minerals, respectively. The quantitative characterization of shale anisotropy can be realized by evaluating the development degree of reservoir fractures and mineral components, providing a reference for logging interpretations, sweet spot prediction, and fracturing construction of shale gas reservoirs.

Laboratory observation of velocity anisotropy affected by clays and microcracks in artificial clay-rich shale samples

The effects of clay mineralogy and crack properties on elastic properties of dry and water-saturated transversely isotropic rocks

Response of Velocity Anisotropy of Shale Under Isotropic and Anisotropic Stress Fields

Ultrasonic velocity anisotropy of jurassic shales with different lithofacies

Experimental Investigation of Stress Sensitivity of Elastic Wave Velocities for Anisotropic Shale in Wufeng–Longmaxi Formation

Experimental research on anisotropic properties of shale

Estimation of Anisotropy Parameters for a Clay-rich Shale Formation Based on a Rock Physics Model

Rock Physics Modeling Studies on the Elastic and Anisotropic Properties of Organic-Rich Shale

STUDY OF INFLUENCE OF PARAMETERS OF INTERMEDIATE PRINCIPAL STRESS AND PRINCIPAL STRESS DIRECTION ON ANISOTROPY OF INTACT CLAY

Elasticity and Characteristic Stress Thresholds of Shale under Deep In Situ Geological Conditions

Experimental study on anisotropic properties of Longmaxi formation shale under uniaxial compression

The investigation of multiple factors on elastic anisotropy of artificial shale based on the orthogonal experiment

3D anisotropic microcracking mechanisms of shale subjected to direct shear loading: A numerical insight

Ultrasonic wave propagation characteristics for typical anisotropic failure modes of shale under uniaxial compression and real-time ultrasonic experiments

Assessment of Anisotropic Elastic Parameters Using Laboratory Triaxial and In-Situ Pressuremeter Tests in Opalinus Clay

An empirical elastic anisotropy prediction model in self-sourced reservoir shales and its influencing factor analysis

Anisotropic borehole response from pressuremeter testing in deep clay shale formations

Investigation of Mechanical Properties of Quartz and Illite in Shale Using Molecular Dynamics Simulation

Measurements of Seismic Anisotropy in Synthetic Rocks with Controlled Crack Geometry and Different Crack Densities

Investigation of crack propagation behavior on shales with different inclination based on ultra-fast time resolution method

Anisotropic Characterization of Mechanical Behavior and Fracture Morphology in Marine and Continental Shales under Uniaxial Compression: A Comparative Analysis