Abstract:Structural strain responses, generally induced by traffic, wind, temperature, and so forth, can be used to evaluate the safety and serviceability of in-service bridges. According to one-year continuous monitoring of strain data recorded by the structural health monitoring system of the Sutong cable-stayed bridge, the lifetime fatigue reliability of three welded details of the orthotropic steel deck was investigated: rib-to-deck at the diaphragm (RTDD), rib-to-diaphragm (RTD), and diaphragm-to-deck (DTD) details. In this case study, detailed analysis of the separated components of the raw strain data was first conducted and included the slow-varying trend and the dynamic component. The strain variation trend in the bottom flange synchronized with the mean temperature, while that in the top flange did not. In addition, the strain dynamic component was mainly induced by the local vehicle axle loads. In the second step, rainflow counting was used to obtain the stress range histograms, which were then used to calculate the equivalent stress range according to the lognormal-fitting method. Finally, a time-dependent fatigue reliability evaluation of the described three welded details was conducted using one-year monitoring strain data. Results showed that the fatigue performance of the two welded details, RTDD and DTD, remained satisfactory after 100 years of operation because the failure probabilities were both lower than 10−5. The designed cutout of the diaphragm was applied to the RTD weld at the welded connection between the U rib and diaphragm. This cutout was validated as a means to help achieve better fatigue resistance for the RTD weld. In the future, long-term monitoring strain data (more than 5 years) need to be investigated for better assessment of the fatigue performance of the orthotropic steel deck.

Investigation on fatigue cracks of diaphragm cutout in bridge orthotropic steel deck

Investigation of the Fatigue Stress of Orthotropic Steel Decks Based on an Arch Bridge with the Application of the Arlequin Method

Fatigue damage investigation on diaphragm cutout detail on orthotropic bridge deck based on field measurement and FEM

Fatigue performance of cracked diaphragm cutouts in steel bridge reinforced employing CFRP/SMA

Numerical Simulation of Fatigue Cracking of Diaphragm Notch in Orthotropic Steel Deck Model

Analysis of Residual Stresses in Curved Cutouts of Steel Box Girder Transverse Diaphragms

Diagnosis and Mitigation of Fatigue Damage in Longitudinal Diaphragms of Cable-Stayed Bridges

Fatigue evaluation and structural optimization of rib-to-diaphragm connection in orthotropic steel decks

Fatigue Reliability Assessment of a Long-Span Cable-Stayed Bridge Based on One-Year Monitoring Strain Data

Fatigue crack-propagation law of diaphragm-to-rib welded joint in steel bridge deck

A case study of fatigue cracks in orthotropic steel bridge decks

Fatigue Analysis of Long-Span Steel Truss Arched Bridge Part I: Experimental and Numerical Study of Orthotropic Steel Deck

Fatigue assessment of orthotropic steel bridge decks based on strain monitoring data

Fatigue Property and Improvement of a Rounded Welding Region between the Diaphragm Plate and Closed Rib of an Orthotropic Steel Bridge Deck

Fatigue Performance Evaluation for an Orthotropic Steel Bridge Deck Based on Field Hotspot Stress Measurements

Cracking of Longitudinal Diaphragms in Long-Span Cable-Stayed Bridges

Fatigue behaviour of root crack in stiffener-to-deck plate weld at crossbeam of orthotropic bridge decks

Fatigue strength and crack growth of double-side welded rib-to-deck joint in orthotropic steel decks

XFEM based study on fatigue performance of rib-to-diaphragm welded joints considering initial defects

Dynamic Property Analysis of Orthotropic Bridge Deck with Local Fatigue Crack