Abstract:The discharge of wastewater containing dyes not only causes serious environmental pollution but also poses a severe threat to human health. The selective separation of dyes and reuse of inorganic salts are vital in the textile industry. In this work, nitrogen-doped graphene quantum dots (N-GQDs) was successfully synthesized via the "one-step solvothermal method", and the N-GQDs composite membranes were innovatively fabricated by constructing a thin selective layer top the modified multi-walled carbon nanotubes (MWCNTs) matrix membrane via interfacial polymerization process. The pore size of the N-GQDs membranes could be flexibly modulated by regulating the contents of the N-GQDs. The suitable N-GQDs membrane (M4, 0.35 wt % of N-GQDs) possessed over 96 % rejection rate for diverse charged dyes, which was higher than that of the piperazine polyamide (PA3) membrane. Notably, the rejection of the smaller molecular weight of Methylene Blue by the M4 membrane reached ~98.93 %, which was higher than that reported in most literature, mainly owing to the relatively smaller average pore size and stronger electronegativity of the membrane. Especially compared with our previous work, the prepared M3 and M4 membranes exhibited an enhancement of ~37.79 % and 39.48 % in rejection of Methylene Blue, ~ 78 % and 19 % in pure water permeability, respectively. On account of the size sieving and charge effect, the N-GQDs membrane (M4) could maintain high rejection for dyes and exhibited efficient separation for dye/salt with a separation factor of 115 for the Congo Red/sodium chloride mixture after continuous cross-flow filtration for 24 h in the simulated wastewater condition. Furthermore, the N-GQDs membrane also exhibited favorable acid-base resistance and satisfactory anti-fouling performance. Importantly, the N-GQDs membranes presented excellent decolorization efficiency for the practical textile wastewater. These results revealed that the as-prepared N-GQDs membrane possessed great potential for actual textile wastewater advanced treatment and purification. This study also offers a new candidate to rationally manipulate the separation properties of nanofiltration membranes adopting new aqueous monomers.

Incorporation of Graphene Oxide Quantum Dots in Gradient Layers of Polyethersulphone Nanofiltration Membranes for Nitrate Rejection from Aqueous Solution

Graphene Oxide Based Membrane Intercalated by Nanoparticles for High Performance Nanofiltration Application

Carboxyl-functionalized graphene oxide polyamide nanofiltration membrane for desalination of dye solutions containing monovalent salt

“Mix-Then-On-Demand-Complex”: In Situ Cascade Anionization and Complexation of Graphene Oxide for High-Performance Nanofiltration Membranes

Physically Coating Nanofiltration Membranes with Graphene Oxide Quantum Dots for Simultaneously Improved Water Permeability and Salt/Dye Rejection

Enhancing the Dye-Rejection Efficiencies and Stability of Graphene Oxide-Based Nanofiltration Membranes via Divalent Cation Intercalation and Mild Reduction

Graphene Oxide Quantum Dots Embedded Polysulfone Membranes with Enhanced Hydrophilicity, Permeability and Antifouling Performance

Functionalised graphene oxide-based nanofiltration membranes with enhanced molecular separation performance

High Flux Nanofiltration Membranes Prepared with a Graphene Oxide Homo-Structure

Graphene oxide-embedded polyamide nanofiltration membranes for selective ion separation

Graphene Oxide-Based Membranes Intercalated with an Aromatic Crosslinker for Low-Pressure Nanofiltration

A Facile Way to Fabricate GO-EDA/Al2O3 Tubular Nanofiltration Membranes with Enhanced Desalination Stability via Fine-Tuning the pH of the Membrane-Forming Suspensions

Azido-group Functionalized Graphene Oxide/polysulfone Mixed Matrix Ultrafiltration Membrane with Enhanced Interfacial Compatibility for Efficient Water and Wastewater Treatment

High-permeable graphene oxide/graphitic carbon nitride composite nanofiltration membrane for selective separation of dye and desalination

Graphene quantum dots enhanced ultrathin nanofilms and arginine engineered nanofiltration membranes with ultra-high separation performance

Polyphenol etched ZIF-8 modified graphene oxide nanofiltration membrane for efficient removal of salts and organic molecules

Incorporation of graphene oxide nanosheets into polyethersulfone membranes to improve their separation performance and antifouling characteristics for Congo Red removal

One-step synthesis of zwitterionic graphene oxide nanohybrid: Application to polysulfone tight ultrafiltration hollow fiber membrane

Efficient decolorization performance of graphene quantum dots modulated nanofiltration membranes with tunable pore size for precise molecular sieving

Conductive thin-film nanocomposite nanofiltration membrane comprising N-doped graphene quantum dots with relieved concentration polarization for sulfate separation from high-salinity solution

Intercalation of soft PPy polymeric nanoparticles in graphene oxide membrane for enhancing nanofiltration performances