Abstract:The Cu materials are playing an irreplaceable role in modern marine facilities, while one major issue affecting their service life is corrosion attack caused by external erosion of chloride ions, which leads to the quickly structural deterioration and reduced durability. To solve this obstinate issue, the corrosion−resistant Ni−based composite films with conductive Yttria–stabilized zirconia (YSZ, 2.5–15 g/L) and non−conductive Si 3 N 4 (2.5–15 g/L) reinforcing phases were composite–electrodeposited on Cu substrate in direct current (DC) mode. It was believed that the electrical differences of incorporated nanoparticles have a significant impact on nucleation and growth behaviors during electrodeposition, which further altered the structure and property of Ni−based composite films. Therefore, the emphasis of this study was to establish the correlation between obtained structure, electrochemical, and immersion corrosion performances at different incorporation levels of YSZ/Si 3 N 4 nanoparticles. The results demonstrate that by increasing the total doping contents, the Electrochemical Impedance Spectroscopy (EIS) and Chronoamperometry (CA) measurements exhibited an initial increase followed by a subsequent decrease on co−deposition dynamics, which was related to the dominant impact of conductive YSZ nanoparticle at electrocrystallization process. Meanwhile, the moderate incorporation level of 15 g/L offered effective control over structural compactness through dispersion−strengthening and grain−refining, and the same ratio of YSZ/Si 3 N 4 nanoparticles further maximized the improvement degree of microhardness, electrochemical passivation, and immersion stability of resulting films. Besides, the corrosion current density ( j corr ) of Ni−YSZ−Si 3 N 4 composite coating under optimum condition of 15 g/L was two orders of magnitude smaller than that of Cu substrate after long−term immersion test, and the corresponding polarization resistance ( R p ) also increased by 8.6 times. Overall, these substantial alterations obtained provide effective guideline for the design and preparation of corrosion−resistant Ni−based composite coating, which is beneficial to prolonging the service life of Cu components in saline environments.

The characteristics of nickel film produced by supercritical carbon dioxide electroplating with ultrasonic agitation

Study on the changes of ultrasonic parameters over supercritical Ni-Co electroplating process

Influence of ultrasonic combined supercritical-CO2 electrodeposition process on copper film fabrication: Electrochemical evaluation

Electrodeposition and Characterization of Nano-Structured Ni–SiC Composite Films

Post-supercritical CO2 electrodeposition approach for Ni-Cu alloy fabrication: An innovative eco-friendly strategy for high-performance corrosion resistance with durability

Composite Electroless Nickel-nano Al2O3 Coatings on Steel Substrate

Comparative Study of Electroless Nickel Film on Different Organic Acids Modified Cuprammonium Fabric (CF)

Parametric Characterization of Copper Metal Coatings Produced by Supercritical Argon Electroplating

Nickel Salt Dependency as Catalyst in the Plating Bath on the Film Properties of Cu/Cu-Ni

The Improvement in Corrosion Resistance of Electroless Ni-P Coating on Micro-arc Oxidized AZ31 Alloy Prepared with Sodium Dodecyl Sulfate Additive and Post-supercritical CO2 Mixed Electrolyte

Effect of Process Conditions on the Microstructure and Properties of Supercritical Ni-GQDs Plating

Preparation and Characterization of Ni-Coated Cr3c2 Powder by Room Temperature Ultrasonic-Assisted Electroless Plating

Electrodeposition and Characterization of Nano-Structured Black Nickel Thin Films

Study on the Corrosion Resistance of Superhydrophobic Ni-Co- P-BN(h) Nanocomposite Coatings Prepared by Electrochemical Machining and Fluorosilane Modification

Electrodeposition of Ni–Co alloys from a deep eutectic solvent

Optimization of Black Nickel Coatings’ Electrodeposit onto Steel

A rapid one-step electrodeposition method for fabrication of the superhydrophobic nickel/cobalt alloy surfaces with excellent robustness and durability features

Effect of Current Density on the Microstructure and Properties of Supercritical Ni-FG Composite Electrodeposited Layers

Fabrication of a Robust Superhydrophobic Ni Coating with Micro–Nano Dual‐Scale Structures on 316L Stainless Steel

Electrodeposition fabrication of corrosion−resistant Ni–based composite film on surface of Cu: Role of conductive YSZ and non−conductive Si 3 N 4 nanoparticles

A Study on the Electrocodeposition Processes and Properties of Ni–SiC Nanocomposite Coatings