Abstract:Two novel electron-rich linear small-molecules, containing benzene and thiophene as the cores with arylamine side groups, named HTM1 and HTM2, respectively, were synthesized via short, easy and efficient synthetic routes. The influence of the pi-linkers of the two materials on photophysical, electrochemical, and thermal properties, and hole mobility and photovoltaic performance was investigated. The compound with thiophene as p-linker (HTM2) shows better solubility and higher hole-transporting mobility than the compound with benzene as p-linker (HTM1). When these two materials were incorporated into perovskite solar cells as hole transporting materials (HTMs), short circuit photocurrent densities (J(sc)s) of 15.83 mA cm(-2) and 21.1 mA cm(-2), open circuit voltages (V(oc)s) of 0.79 V and 1.09 V, and fill factors (FFs) of 0.46 and 0.62, were obtained. These factors contributed to average overall power conversion efficiencies (PCEs) of 6.4% and 13.9% with the best PCEs of 7.5% and 14.7%, respectively. The performance of HTM2 is comparable to the PCE obtained using the current state-of-the- art HTM of 2,2 ',7,7 '-tetrakis(N, N '-di-p-methoxyphenylamine)-9,9 '-spirobifluorene (spiro-OMeTAD) with the best PCE of 17.4% using a similar device preparation method and measurement conditions. These results showed that selecting a suitable pi-linker is important for the performance of HTMs. And the simple HTM2 material is a promising HTM with the potential to replace the expensive spiro-OMeTAD due to its comparable performance with a much simpler synthesis route and much reduced cost (10 times less than that of spiro-OMeTAD). This study demonstrates that a compound with a suitable pi-linker could be a low-cost and high performance HTM to replace spiro-OMeTAD.

Inexpensive Hole-Transporting Materials Derived from Tröger's Base Afford Efficient and Stable Perovskite Solar Cells

Asymmetric Triphenylethylene-Based Hole Transporting Materials for Highly Efficient Perovskite Solar Cells

Cut from the Same Cloth: Enamine-Derived Spirobifluorenes as Hole Transporters for Perovskite Solar Cells

Asymmetric 3D Hole-Transporting Materials Based on Triphenylethylene for Perovskite Solar Cells

Cyclopentadithiophene-Based Hole-Transporting Material for Highly Stable Perovskite Solar Cells with Stabilized Efficiencies Approaching 21%

Unadorned Molecular Engineering of Phenoxazine-Core-Based Hole-Transport Materials for Sustainable Perovskite Solar Cells

Dopant‐Free Donor (d)–π–d–π–d Conjugated Hole‐Transport Materials for Efficient and Stable Perovskite Solar Cells

Molecular engineering of methoxy-substituted terthienyl core unit based hole transport materials for perovskite solar cells

Simple hole-transporting materials containing twin-carbazole moiety and unconjugated flexible linker for efficient and stable perovskite solar cells

Cyclopentadiene‐Based Hole‐Transport Material for Cost‐Reduced Stabilized Perovskite Solar Cells with Power Conversion Efficiencies over 23%

Over 20% PCE Perovskite Solar Cells with Superior Stability Achieved by Novel and Low-Cost Hole-Transporting Materials

Dopant-free dithieno[3′,2':3,4;2′′,3'':5,6]benzo[1,2-d]imidazole-based hole-transporting materials for efficient perovskite solar cells

Low-cost and Efficient Hole Transport Materials Based on 9-Phenyl-9h-car-bazole Branch for Perovskite Solar Cells

Hole-Transporting Materials for Printable Perovskite Solar Cells

Simple and low-cost thiophene and benzene-conjugated triaryamines as hole-transporting materials for perovskite solar cells

Dopant‐Free Hole Transport Materials Based on a Large Conjugated Electron‐Deficient Core for Efficient Perovskite Solar Cells

Highly efficient perovskite solar cells based on symmetric hole transport material constructed with indaceno[1,2-b:5,6-b']dithiophene core building block

Highly Efficient and Stable Perovskite Solar Cells Via a Multifunctional Hole Transporting Material

Dithieno[3,2‐b:2′,3′‐d]pyrrol‐Cored Hole Transport Material Enabling Over 21% Efficiency Dopant‐Free Perovskite Solar Cells

Tetraphenylbutadiene-Based Symmetric 3D Hole-Transporting Materials for Perovskite Solar Cells: A Trial Trade-off Between Charge Mobility and Film Morphology.

Readily Synthesized Dopant-Free Hole Transport Materials with Phenol Core for Stabilized Mixed Perovskite Solar Cells