Abstract:Airborne electromagnetic (AEM) exploration is an effective geophysical tool, especially suitable for survey in ridged mountain areas. Theoretical research shows that topography has serious effect on airborne EM responses. Negligence of this effect may create large errors in AEM interpretations. However, until now little study has been done on 3D topographic effect on frequency-/time-domain (FD/TD) airborne EM systems. Most scholars dealt with this problem using a structured grid that can't simulate topography accurately. We present analgorithm using edge-based unstructured finite-element method(FEM). Starting from the frequency-domain Maxwell's equations, we obtain a vector Helmholtz equation for a stable solution when air is present. We use the Galerkin method to discretize the Helmholtz equation and obtain the final finite-element equations. To accelerate the calculation speed, the source response in a free-space is used as the primary field, while the direct solver is used to deal with the multiple-source problem. After calculating the frequency-domain AEM responses, a Hankel's transform is applied to obtain the time-domain EM responses. To check the accuracy of the presented algorithm for AEM topographic modeling, we compare our results with both the semi-analytical results and those from published literatures. After that, we calculate the EM responses for 3D models with only topography and with both topography and anomalous targets. From profiled AEM responses, we draw similar conclusions to those of Yin (2015), while from area AEM responses, we find that; 1) for frequency-domain AEM systems, the real part of AEM response contains more information to deep earth than the imaginary part; 2) for time-domain AEM system, the magnetic induction dB/dt reveals the underground conductivity distribution better than the B field. These features provide the theoretical basis for identification and correction of topographic effect from the AEM measurements.

Predicting Spatial Field Values Under Undulating Terrain With 2W-PE Based on Machine Learning

Modeling the 3D Terrain Effect on MT by the Boundary Element Method

Electromagnetic Effective-Degree-of-Freedom Prediction with Parabolic Equation Method

Characterization of Mutual Coupling Effects among Multi-Antennas Mounted on a Perfect Electrically Conducting (PEC) Tower Platform in the Presence of Intentional Electromagnetic Pulses (Iemps)

Oscillatory Responses of a Spatially Random Seabed in the Vicinity of Structures: Validation and Application of the Integrated CFD-SFEM

Radio Wave Propagation Prediction in Urban Based on Parabolic Equation Methods

Research on electromagnetic scattering and radio wave propagation algorithm based on machine learning in half-space

Prediction Method of Maximum Propagation Angle in Parabolic Equation Model over Irregular Terrain

Two-Way Parabolic Equation Method for Radio Propagation Over Rough Sea Surface

Strength of the Electric Dipole Source Field in Multilayer Spherical Media

Near-Field Prediction in Complex Environment Based on Phaseless Scanned Fields and Machine Learning

A Machine Learning Method for 2-D Scattered Far-Field Prediction Based on Wave Coefficients

Numerical Investigation of Rayleigh-wave Propagation on Topography Surface

Numerical simulation and prediction of spatial wind field under complex terrain

A versatile wave propagation model for the VHF/UHF range considering three-dimensional terrain

Terrain Simplification Algorithm in Radio Wave Propagation Prediction

Prediction of reservoir saturation field in high water cut stage by bore-ground electromagnetic method based on machine learning

Wave field predictions using a multi-layer perceptron and decision tree model based on physical principles: A case study at the Pearl River Estuary

Lifting Wavelet-Based Two-Dimensional Scalar Field Simulation for Underwater Navigation Application

3D modeling on topographic effect for frequency-/time-domain airborne EM systems

Robust Location Algorithm Based on Weighted Least-Squares Support Vector Machine (WLS-SVM) for Non-Line-of-sight Environments