Abstract:In recent decades, geoelectrical methods have played a very important role in near-surface investigation. The most widely used of these methods is electrical resistivity tomography (ERT). Regardless of the forward and inversion algorithms used, the original data collected from a survey is the most important factor for quality of the resulted model. However, 3D electrical resistivity survey design continues to be based on data sets recorded using one or more of the standard electrode arrays. There is a recognized need for the 3D survey design to get better resolution using fewer data. Choosing suitable data from the comprehensive data set is a great approach. By reasonable selecting, better resolution can be obtained with fewer electrodes and measurements than conventional arrays. Previous research has demonstrated that the optimized survey design using the 'Compare R' method can give a nice performance.This paper adds target-oriented selection and modified the original 'Compare R' method. The survey design should be focused on specific target areas, which need a priori information about the subsurface properties. We select electrodes and configurations as the target set by the comprehensive set firstly which meets the requirements of the target area. The number of measurements and electrodes is much less than the comprehensive set and the model resolution matrix takes less time to calculate. At the next step for rank, we calculate the sensitivity matrix of the target set only once and then calculate the contribution degree of each measurement separately from it. The time of iterative calculation of the resolution matrix when measurements set changing is less than the original method.The traditional method of evaluating RMS is not appropriate for comparing the quality of collected data by different survey designs. SSIM (structural similarity index) gives more reliable measures of image similarity better than the RMS. The curves of SSIM values in three dimensions and the average SSIM are given as quantitative comparisons. Besides, the frequency of electrodes utilized given to guides on selecting the highest used electrodes. Finally, the curves of the average relative resolution S and the number of electrodes as the number of measurements increase are given, which proves the method works effectively.The results show the significance of using target-oriented optimized survey design, as it selects fewer electrodes and arrays than the original CR method. Also, it produces better resolution than conventional arrays and takes less calculation time. 3D SSIM, frequency of electrodes used, the relationship between average relative resolution, number of electrodes and number of measurements, these quantitative comparison methods can effectively evaluate the data collected in various survey designs.

3D modeling on topographic effect for frequency-/time-domain airborne EM systems

Modeling the 3D Terrain Effect on MT by the Boundary Element Method

A Footprint-Guided Algorithm for 3-D Simulation Based on BEM of Topography Effect in Frequency-Domain Airborne Electromagnetic Method

3D Airborne EM Forward Modeling Based on Time-Domain Spectral Element Method

3D frequency-domain modeling of marine controlled source electromagnetic responses with topography using finite volume method

Target-oriented Optimized Survey Design and Quantitative Comparison for 3D Electrical Resistivity Tomography

3D Inversion of Large-Scale Frequency-Domain Airborne Electromagnetic Data Using Unstructured Local Mesh

Hybrid Time-Domain Adaptive Integration Method for Simulating Transient Electromagnetic Responses of an Arbitrary Structure with Large Scale

3D Airborne EM Forward Modeling Based on Finite-Element Method with Goal-Oriented Adaptive Octree Mesh

A Systematic Study of Topography Effect of Ert Based on 3-D Modeling and Inversion

Three-dimensional airborne electromagnetic forward modeling based on multiscale hexahedral finite-element method

A goal-oriented adaptive algorithm for 3D magnetotelluric forward modeling

Adaptive finite element for 3D time-domain airborne electromagnetic modeling based on hybrid posterior error estimation

Numerical Investigation of Rayleigh-wave Propagation on Topography Surface

Modeling Of Rayleigh-Wave Propagation In Three-Dimensional Media With Topography Using Staggered-Grid Finite Difference Scheme

Three-Dimensional Inversion of Long-Offset Transient Electromagnetic Method over Topography

3D anisotropic modeling of geomagnetic depth sounding based on unstructured edge-based finite-element method

Non-orthogonal-Grid-based three dimensional modeling of transient electromagnetic field with topography

3D Time-Domain Airborne Electromagnetic Inversion Based on Secondary Field Finite-Volume Method

One-dimensional Modeling of Airborne Transient Electromagnetic using a Long Grounded-wire Source

Goal-Oriented 3-D Time-Domain Marine CSEM Modeling With Anisotropy and Topography