Abstract:An experimental and theoretical investigation of the preparation and exposure of multilayer photosensitive materials is presented. It is shown how the recorded change in the refractive index in each layer depends on the dye (photosensitizer) concentrations in each layer. It is also shown how the photosensitive material properties in each layer can be controlled to optimize some recording characteristics for particular applications. To do so, a set of equations, predicting the amplitude of higher harmonics refractive index amplitudes induced in the material layers with depth during exposure, is derived. This results in a technique for varying the dye concentration in each layer of a multilayer, so as to optimize volume diffraction grating performance. In part I of this paper, the 3D nonlocal photopolymerization-driven diffusion (NPDD) model is applied to calculate the resulting combined multilayer absorption and polymerization processes. The NPDD describes the time-varying behaviors taking place during exposure in such photopolymer materials. Simulations are performed for an acrylamide/polyvinyl alcohol-based photopolymer containing erythrosine-B dye. It is predicted that, in general, non-uniform gratings are formed, with the resulting refractive index being distorted both from the ideal sinusoidal cross-sectional spatial distribution and also with depth. This agrees with previous results indicating that increasing the thickness of a single photopolymer layer does not in practice lead to ever-increasing angular selectivity. In part II of this paper, it is confirmed experimentally that a suitably modified multilayer can be used to increase grating angular selectivity, i.e., reduce the width of the off-Bragg replay curve.

The Chemistry and Physics of Bayfol® HX Film Holographic Photopolymer

Multilayer volume holographic gratings from Bayfol HX: light and neutron optical characteristics

Improving the Uniformity of Holographic Recording Using Multilayer Photopolymer. Part I. Theoretical Analysis

Holographic Characterization of Diffraction Grating Modulation in Photopolymers.

Improving performance of two‐stage photopolymers for volume holographic recording by fluorinated epoxy‐amine cross‐linked matrices

Recording Reflection Volume Holographic Gratings with Enhanced Performance by Two‐Stage Photopolymers Containing Bifunctional Monomers

Holographic Grating Enhancement Induced by a Dual-Photo-Initiator System in PMMA Substrate Polymers

Application of Photopolymer Materials in Holographic Technologies

Recording Performance of Holographic Diffraction Gratings in Dry Films Containing Hyperbranched Polyisophthalesters As Polymeric Binders.

The Fabrication of Permanent Holographic Gratings in Bulk Polymer Medium by a Femtosecond Laser

Three-dimensional Numerical Model of Holographic Grating Formation in Photopolymer Materials

Holographic Grating Formation in Dry Photopolymer Film with Shrinkage

Diffraction Gratings for Neutrons from Polymers and Holographic Polymer-Dispersed Liquid Crystals

Holographic Grating Formation in Cationic Photopolymers with Dark Reaction

Computer-Generated Holographic Gratings in Soft Matter

Polymer Network Liquid Crystal Grating/Fresnel Lens Fabricated by Holography

High-Performance Holographic Photopolymers Based on Low Refractive Index Host Matrices Containing Fluoroelastomers

Holographic Formation of Non-uniform Diffraction Structures by Arbitrary Polarized Recording Beams in Liquid Crystal-photopolymer Compositions

Reconfigurable Polymer-Templated Liquid Crystal Holographic Gratings Via Visible-Light Recording.

Dynamics of Peristrophic Multiplexing in Holographic Polymer-Dispersed Liquid Crystal

Characterization of volume holographic optical elements recorded in Bayfol HX photopolymer for solar photovoltaic applications