Abstract:A hierarchically structured ceramic coating (HSCC) is constructed using plasma electrolytic oxidation (PEO) technology, incorporating both crystalline ceramics and amorphous oxides, demonstrating remarkable thermal stability and shear resistance. The strong interfacial bonding and the combination of enhancement and compliant phases well address the strength‐toughness trade‐off dilemma, offering a new strategy for designing and fabricating of ceramic composites. A major challenge in the application of ceramic materials is a trade‐off between strength and toughness. In this work, hierarchically structured ceramic coatings (HSCCs) are fabricated to address this challenge. HSCCs feature a dual‐layer micron‐scale structure built on a "brick‐mortar" nanoscale structure, which is achieved by changing the crystalline and amorphous phase ratio during plasma electrolytic oxidation (PEO). It is found that HSCCs with homogeneous interfaces exhibit high thermal stability up to 700 °C and a 65% improvement in shear strain resistance compared to conventional crystalline coatings (CCCs). This improvement is attributed to the stabilizing effect of atoms on the boundaries of the enhancement phase and the facilitating effect on the deformation of the compliant phase. The hierarchical structure effectively leverages the plasticity of the compliant phase and the strength of the enhancement phase facilitated by the homogeneous interface. This work proposes a feasible approach for improving the toughness of ceramic functional composites and mitigating their susceptibility to brittle fracture.

Dual-Phase Super-Strong and Elastic Ceramic

Activating Continuous Dislocation Pinning Enhanced Toughness of Nanocomposite Coating Through Specially Oriented Semicoherent Heterointerface Lattice Distortion

Multiphase ceramic nanofibers with super-elasticity from − 196–1600 °C

Ultra-high Strength ZTA Ceramic Foams with Large Amounts of Intragranular Structures Resulting from Dual-Phase Sol

Ultrahigh-Strength Porous Ceramic Composites via a Simple Directional Solidification Process

ZrO2 Matrix Toughened Ceramic Material‐Strength and Toughness

An Inverse Hall-Petch Behavior and Improving Toughness in Translucent Nanocrystalline High-entropy Zirconate Ceramic

Enhanced Mechanical Properties in Ceramic Multilayer Composites Through Integrating Crystallographic Texture and Second-Phase Toughening

ZrO 2 Matrix Toughened Ceramic Material‐Strength and Toughness

Ultrahigh toughness polycrystalline ceramics without fading of strength

Hierarchically Structured Ceramic Coatings Based on Zirconia and Magnesium Oxide with High Toughness

High Toughness Combined with High Strength in Oxide Ceramic Nanofibers

Towards high strengthening efficiency of equiaxed and platelet-shaped alumina reinforced zirconia ceramics with textured microstructure using DLP-based stereolithography

Synergistic Toughening Effect of SiC Whiskers and Particles in ZrO2–Al2O3–SiC Ceramics

Toughening Ceramic-Based Composites by Homogenizing the Lattice Strain at Phase Boundaries.

Ultrastrong Tough Zirconia Ceramics by Defects‐engineering

Rare-earth high-entropy aluminate-toughened-zirconate dual-phase composite ceramics for advanced thermal barrier coatings

Ultratough conductive graphene/alumina nanocomposites

Using PyC Coated Short Chopped Carbon Fiber to Tackle the Dilemma Between Toughness and Strength of ZrC-SiC

Superior Flexibility in Oxide Ceramic Crystal Nanofibers

Strategies for simultaneous strengthening and toughening via nanoscopic intracrystalline defects in a biogenic ceramic