Abstract:In the field of four-dimensional (4D) printing deformation, shape memory deformation can be achieved by changing printing parameters or materials. However, the effect of different thickness ratios between heterogeneous layers of the bilayer structure on deformation in 4D printing is still an unknown factor. A method for programming the fiber arrangement direction and the thickness ratio of the polylactic acid (PLA) layer and thermoplastic polyurethane (TPU) layer was proposed to achieve temperature-driven controllable deformation of the heterogeneous laminated bilayer structure. Three-dimensional (3D) printing method based on fused deposition modeling (FDM) technology was used to print homogeneous laminated structures, material distribution structures, and heterogeneous laminated bilayer structures, respectively. The thermal strain of homogeneous laminated structures with different fiber arrangement direction of PLA and TPU materials was analyzed. The effect of four printed material distribution structures on bending angle and bending response time of temperature-driven deformation in 4D printing was analyzed. The deformation performance of heterogeneous laminated bilayer structures with different thickness ratios between PLA layer and TPU layer were studied through a combination of theoretical analysis and experimental verification. The experimental results show that the bending curvature of the bilayer structure with the thickness ratio of 7:5 (PLA: TPU) is the maximum that is 1.11 cm −1 . Four cross-shaped components were designed to demonstrate the programmability of heterogeneous laminated bilayer structure in 4D printing, and the controllable deformation of the programmable bilayer structure was verified through the printed rosette structure. Therefore, programming the fiber arrangement direction and the thickness ratio of the heterogeneous bilayer structure is an effective strategy for achieving temperature-driven controllable deformation in 4D printing.

Tunable hyperbolic out-of-plane deformation of 3D-printed auxetic PLA shape memory arrays

Nonlinear Mechanics of Horseshoe Microstructure-Based Lattice Design

Sequentially tunable buckling in 3D printing auxetic metamaterial undergoing twofold viscoelastic resonances

3D printing auxetic draft-angle structures towards tunable buckling complexity

Design and characterization of novel bi-directional auxetic cubic and cylindrical metamaterials

4D Printing Auxetic Metamaterials with Tunable, Programmable, and Reconfigurable Mechanical Properties

3D printed auxetic metamaterials with tunable mechanical properties and morphological fitting abilities

An experimental and numerical study on an innovative metastructure for 3D printed thermoplastic polyurethane with auxetic performance

Design of Mechanical Auxetic Metamaterial for Heterogeneous Assembly, Programmable Periodic Porous Elastomer Structures

Controllable Three-Dimension Auxetic Structure Design Strategies Based on Triply Periodic Minimal Surfaces and Dual Period Deformation Function

4D printed multi-stable metamaterials with mechanically tunable performance

A novel 3D tetra-missing rib auxetic meta-structure with tension/compression-twisting coupling effect

4D printed tunable mechanical metamaterials with shape memory operations

Adjustable mechanical performances of 4D-printed shape memory lattice structures

Graded metastructure design for linearly auxetic deformation under tension: From 2D honeycombs to 3D truncated cones

3D bi-directional auxetic square metastructure with programmable thermal expansion and Poisson's ratio

Ce-Ti amorphous oxides for selective catalytic reduction of NO with NH3: confirmation of Ce-O-Ti active sites.

Temperature-driven controllable deformation in 4D printing through programmable heterogeneous laminated bilayer structure

Tunable deformation behavior of 4D printed shape memory polymers with embedded pre-stretched elastomers

Experimental and Numerical Investigation of Polymer-Based 3D-Printed Lattice Structures with Largely Tunable Mechanical Properties Based on Triply Periodic Minimal Surface

Tunable Auxetic Mechanical Metamaterials with “Arch-Shaped” Units