Abstract:Abstract Auxetic metamaterials have unique structural designs exhibiting zero or negative Poisson’ ratios during stretch/compression processes, which enable many critical applications such as sensing technology, wearable devices, and weight reduction parts. However, it is difficult to achieve ideal performance of various structural designs through geometry manipulation due to the beam/wall buckling under large strain. One way to minimize the occurrence of buckling is by introducing the high elasticity on the joints, but trade-offs exist among different mechanical behaviors. To this end, this study proposes to use a multi-material combining with the structure optimization to design an auxetic structure. The basic re-entrant structure is employed due to its simplicity, and finite element method (FEM) is adopted to demonstrate the effectiveness of this newly proposed strategy regarding the auxetic behaviors. For this multi-material structure, a different Young’s modulus is designed to apply on the additional arch structure. A series of simulations, which consider the influence of the mechanical properties, are conducted to investigate the change of auxetic behaviors such as stress distribution, Poisson’s ratio, and equivalent Young’s modulus against the applied material properties. The results indicate that the mechanical properties are strongly affected by the geometry design and the applied materials properties. Meanwhile, the buckling effect of the beam/wall could be eliminated if the hinge strength is small enough. The trade-off between equivalent mechanical properties and Poisson’s ratio could also be tuned through this newly material-based design.

Tunable Auxetic Mechanical Metamaterials with “Arch-Shaped” Units

3D printed auxetic metamaterials with tunable mechanical properties and morphological fitting abilities

4D Printing Auxetic Metamaterials with Tunable, Programmable, and Reconfigurable Mechanical Properties

3D Tiled Auxetic Metamaterial: A New Family of Mechanical Metamaterial with High Resilience and Mechanical Hysteresis

Auxetic Mechanical Metamaterials to Enhance Sensitivity of Stretchable Strain Sensors

A Simple Auxetic Tubular Structure with Tuneable Mechanical Properties

Design and Mechanical Characteristics of Auxetic Metamaterial with Tunable Stiffness

A Finite Element Simulation Study on the Properties of a Multi-Material Based Auxetic Metamaterial

Hybrid-Microstructure-Based Soft Network Materials with Independent Tunability of Mechanical Properties over Large Deformations

A Novel Mechanical Metamaterial with Dramatically Different Elastic Parameters in Tension and Compression

Geometrically tunable architected materials designed from prismatic rotating units

Strain-independent Auxetic Metamaterials Inspired from Atomic Lattice

A Novel Mechanical Metamaterial with Simultaneous Stretching- and Compression-Expanding Property

Bistable Auxetic Mechanical Metamaterials Inspired by Ancient Geometric Motifs

Auxetic mechanical metamaterials: from soft to stiff

A Novel Two-Dimensional Mechanical Metamaterial with Negative Poisson's Ratio

Tunable Isotropy on the Mechanical Properties of Wavy Hexachiral Metamaterials: Numerical Simulation and Additive Manufacturing

Mechanically Programmable Composite Metamaterials with Switchable Positive/Negative Poisson's Ratio

GAM: General Auxetic Metamaterial with Tunable 3D Auxetic Behavior Using the Same Unit Cell Boundary Connectivity

3D Printing of Auxetic Metamaterials with Digitally Reprogrammable Shape.

3D Auxetic Metamaterials with Elastically‐Stable Continuous Phase Transition