Abstract:This work introduces a new Lagrangian strain-based model to predict the shear-induced hemolysis in biomedical devices. Current computational models for device-induced hemolysis usually utilize empirical fitting of the released free hemoglobin (Hb) in plasma from damaged red blood cells (RBCs). These empirical correlations contain parameters that depend on specific device and operating conditions, thus cannot be used to predict hemolysis in a general device. The proposed algorithm does not have any empirical parameters, thus can presumably be used for hemolysis prediction in various blood-wetting medical devices. In contrast to empirical correlations in which the Hb release is related to the shear stress and exposure time without considering the physical processes, the proposed model links flow-induced deformation of the RBC membrane to membrane permeabilization and Hb release. In this approach, once the steady-state numerical solution of blood flow in the device is obtained under a prescribed operating condition, sample path lines are traced from the inlet of the device to the outlet to calculate the history of the shear stress tensor. In solving the fluid flow, it is assumed that RBCs do not have any influence on the flow pattern. Along each path line, shear stress tensor will be input into a coarse-grained (CG) RBC model to calculate the RBC deformation. Then the correlations obtained from molecular dynamics (MD) simulations are applied to relate the local areal RBC deformation to the perforated area on the RBC membrane. Finally, Hb released out of transient pores is calculated over each path line via a diffusion equation considering the effects of the steric hindrance and increased hydrodynamic drag due to the size of the Hb molecule. The total index of hemolysis (IH) is calculated by integration of released Hb over all the path lines in the computational domain. Hemolysis generated in the Food and Drug Administration (FDA) nozzle and two blood pumps, that is, a CentriMag blood pump (a centrifugal pump) and HeartMate II (an axial pump), for different flow regimes including the laminar and turbulent flows are calculated via the proposed algorithm. In all the simulations, the numerical predicted IH is close to the range of experimental data. The results promisingly indicate that this multiscale approach can be used as a tool for predicting hemolysis and optimizing the hematologic design of other types of blood-wetting devices.

Determination of 3-methoxy-4-hydroxyphenylpyruvic acid, 3,4-dihydroxyphenylethylene glycol, and 3,4-dihydroxyphenylmandelic acid in urine by mass fragmentography, with use of deuterium-labeled internal standards.

Shear stress evaluation on blood cells using computational fluid dynamics

Computational fluid dynamics simulating of the FDA benchmark blood pump with different coefficient sets and scaler shear stress models used in the power-law hemolysis model

The Impact of the Impeller's Hub Design on the Performance and Blood Damage in a Microaxial Mechanical Circulatory Support Device – a Numerical Study

[Numerical study of the effect of geometrical parameters of straight impellers on the flow and hemolysis performance of centrifugal blood pumps]

Hemolysis prediction in bio-microfluidic applications using resolved CFD-DEM simulations

Blood Pump Design Variations and Their Influence on Hydraulic Performance and Indicators of Hemocompatibility

Numerical Simulation of Hemolysis in a Micro Axial Flow Blood Pump

Prediction of mechanical hemolysis in medical devices via a Lagrangian strain-based multiscale model

Modeling and prediction of flow-induced hemolysis: a review

Eulerian Formulation of the Tensor-Based Morphology Equations for Strain-Based Blood Damage Modeling

Cell-scale hemolysis evaluation of intervenient ventricular assist device based on dissipative particle dynamics

Development of a Numerical Approach for the CFD Simulation of a Gear Pump under Actual Operating Conditions

Geometric Optimization of an Extracorporeal Centrifugal Blood Pump with an Unshrouded Impeller Concerning Both Hydraulic Performance and Shear Stress

Computational Fluid Dynamics Modeling and Hemolysis Analysis of Axial Blood Pumps with Various Impeller Structures

Investigation of hemocompatibility and vortical structures for a centrifugal blood pump based on large eddy simulation

Hydrodynamic and Hemolysis Analysis on Distance and Clearance Between Impeller and Diffuser of Axial Blood Pump

A two-stage rotary blood pump design with potentially lower blood trauma: a computational study

Assessment of haemolysis models for a positive-displacement total artificial heart

Assessment of turbulence models for pulsatile flow inside a heart pump