Abstract:The ubiquitous presence of pharmaceutical pollution in the environment and its adverse impacts on public health and aquatic ecosystems have recently attracted increasing attention. Graphene oxide coated with magnetite (GO-Fe3O4) is effective at removing pharmaceuticals in water by adsorption. However, the myriad compositions in real water are known to adversely impact the adsorption performance. One objective of this study was to investigate the influence of pore blockage by natural organic matter (NOM) with different sizes on pharmaceutical adsorption onto GO-Fe3O4. Meanwhile, the feasibility of pore dimension tuning of GO-Fe3O4 for selective adsorption of pharmaceuticals with different structural characteristics was explored. It was shown in the batch experiments that the adsorbed pharmaceutical concentrations onto GO-Fe3O4 were significantly affected (dropped by 2–86%) by NOM that had size ranges similar to the pore dimensions of GO-Fe3O4, as the impact was enhanced when the adsorption occurred at acidic pHs (e.g., pH 3). Specific surface areas, zeta potentials, pore volumes, and pore-size distributions of GO-Fe3O4 were influenced by the Fe content forming different-sized Fe3O4 between GO layers. Low Fe contents in GO-Fe3O4 increased the formation of nano-sized pores (2.0–12.5 nm) that were efficient in the adsorption of pharmaceuticals with low molecular weights (e.g., 129 kDa) or planar structures via size discrimination or inter-planar π-π interaction, respectively. As excess larger-sized pores (e.g., >50 nm) were formed on the surface of GO-Fe3O4 due to higher Fe contents, pharmaceuticals with larger molecular weights (e.g., 296 kDa) or those removed by electrostatic attraction between the adsorbate and adsorbent dominated on the GO-Fe3O4 surface. Given these observations, the surface characteristics of GO-Fe3O4 were alterable to selectively remove different pharmaceuticals in water by adsorption, and the critical factors determining the adsorption performance were discussed. These findings provide useful views on the feasibility of treating pharmaceutical wastewater, recycling valuable pharmaceuticals, or removing those with risks to public health and ecosystems.

Synthesis of a highly recoverable 3D MnO2/rGO hybrid aerogel for efficient adsorptive separation of pharmaceutical residue

Hydrophilic and strengthened 3D reduced graphene oxide/nano-Fe3O4 hybrid hydrogel for enhanced adsorption and catalytic oxidation of typical pharmaceuticals

Ultralight Aerogel Based on Molecular-Modified Poly(m-Phenylenediamine) Crosslinking with Polyvinyl Alcohol/graphene Oxide for Flow Adsorption

Versatile 3D Reduced Graphene Oxide/poly(amino-Phosphonic Acid) Aerogel Derived from Waste Acrylic Fibers As an Efficient Adsorbent for Water Purification.

Engineering of 3d Graphene Oxide Hydrogel-Supported Mno2-Feooh Nanoparticles with Synergistic Effect of Oxidation and Absorption Toward Highly Efficient Removal of Arsenic

Self-regenerative and self-enhanced smart graphene/Ag3PO4 hydrogel adsorbent under visible light

A robust self-regenerating graphene-based adsorbent for pharmaceutical removal in various water environments

Hydrogen Bonds-Based Flexible Regulation of Acetaminophen Adsorption/desorption Behavior in Aqueous System: Role of the Smart Thermoresponsive Graphene Oxide

Amino-functionalized alginate/graphene double-network hydrogel beads for emerging contaminant removal from aqueous solution.

High-efficient Adsorption for Versatile Adsorbates by Elastic Reduced Graphene Oxide/fe3o4 Magnetic Aerogels Mediated by Carbon Nanotubes.

High-efficient adsorption for versatile adsorbates by elastic reduced graphene oxide/Fe 3 O 4 magnetic aerogels mediated by carbon nanotubes

Robust and Multifunctional 3D Graphene-Based Aerogels Reinforced by Hydroxyapatite Nanowires for Highly Efficient Organic Solvent Adsorption and Fluoride Removal

Ultralight, Compressive and Superhydrophobic Methyltriethoxysilane-Modified Graphene Aerogels for Recyclable and Selective Organic Pollutants Adsorption from Water

Graphene oxide/polydopamine modified montmorillonite/carboxymethyl chitosan composite aerogel for efficient removal of Pb 2+ , Cu 2+ , and Cd 2+ : Adsorption behavior, mechanism and DFT study

The Influences of Pore Blockage by Natural Organic Matter and Pore Dimension Tuning on Pharmaceutical Adsorption onto GO-Fe3O4

An Acid Induction Strategy to Construct an Ultralight and Durable Amino-Functionalized Graphene Oxide Aerogel for Enhanced Quinoline Pollutants Extraction from Coking Wastewater

Self-assembled graphene aerogels for removal of methylene blue and copper from aqueous solutions

Facile synthesis of a 3D magnetic graphene oxide/Fe3O4/banana peel-derived cellulose composite aerogel for the efficient removal of tetracycline

Three-dimensional graded porous structure and compressible KGM-GO/CS/SA composite aerogel spheres for efficient adsorption of antibiotics

Multifunctional Graphene/Poly(Vinyl Alcohol) Aerogels: in Situ Hydrothermal Preparation and Applications in Broad-Spectrum Adsorption for Dyes and Oils

Decorating graphene oxide with zeolitic imidazolate framework (ZIF-8) and pseudo-boehmite offers ultra-high adsorption capacity of diclofenac in hospital effluents