Abstract:Capacitive deionization (CDI), a m ethod with notable advantages of relatively low energy consumption and environmental friendliness, has been widely used in desalination of saltwater. However, due to the weak electrical double-layer electrosorption of ions from water, CDI has suffered from low throughput capacity that may limit its commercial applications. Thus, it is of importance to develop a high-efficiency and engineering-feasible CDI process. Manganese and cobalt and their oxides, being faradic materials, have a relatively high pseudocapacitance, which can cause an increase of positive and negative charges on opposing electrodes. However, their low conductivity properties limit their electrochemical applications. Pseudocapacitive Mn3O4 nanoparticles encapsulated within a conducting carbon shell (Mn3O4@C) were prepared to enhance charge transfer and capacitance for CDI. Desalination performances of the Mn3O4@C (5-15 wt %) core-shell nanoparticles on activated carbon (AC) (Mn3O4@C/AC) serving as CDI electrodes have thus been investigated. The pseudocapacitive Mn3O4@C/AC electrodes with relatively low diffusion resistances have much greater capacitance (240-1300 F/g) than the pristine AC electrode (120 F/g). In situ synchrotron X-ray absorption near-edge structure spectra of the Mn3O4@C/AC electrodes during CDI (under 1.2 and -1.2 V for electrosorption and regeneration, respectively) demonstrate that reversible faradic redox reactions cause more negative charges on the negative electrode and more positive charges on the positive electrode. Consequently, the pseudocapacitive electrodes for CDI of saltwater ([NaCl] = 1000 ppm) show much better desalination performances with a high optimized salt removal (600 mg/g·day), electrosorption efficiency (48%), and electrosorption capacity (EC) (25 mg/g) than the AC electrodes (288 mg/g·day, 23%, and 12 mg/g, respectively). The Mn3O4@C/AC electrode has a maximum EC of 29 mg/g for CDI under +1.2 V. Also, the Mn3O4@C/AC electrodes have much higher pseudocapacitive electrosorption rate constants (0.0049-0.0087 h-1) than the AC electrode (0.0016 h-1). This work demonstrates the feasibility of high-efficiency CDI of saltwater for water recycling and reuse using the low-cost and easily fabricated pseudocapacitive Mn3O4@C/AC electrodes.

Ultrahigh-Desalination-Capacity Dual-Ion Electrochemical Deionization Device Based on Na3V2(PO4)3@C-AgCl Electrodes

Integrating battery and capacitive materials for efficient sodium and chloride capture

Nickel Hexacyanoferrate Electrodes for Continuous Cation Intercalation Desalination of Brackish Water

Extraordinary dual-ion electrochemical deionization capacity and energy efficiency enabled by coupling of Na 3 Fe 2 (PO 4 ) 3 and NiVAl layered double hydroxide electrodes

Efficient dual-ions hybrid capacitive system for superior deionization with enhanced kinetics match

Efficient and Durable Sodium, Chloride‐doped Iron Oxide‐Hydroxide Nanohybrid‐Promoted Capacitive Deionization of Saline Water via Synergetic Pseudocapacitive Process

Size and composition regulated sodium vanadium fluorophosphate wrapped in rGO as an efficient cathode for brackish and seawater desalination

Up-shifting the desalination rate limit of capacitive deionization via integrating chloride-capturing Bi nanocluster with flow-through cell architecture

Pseudocapacitive Deionization of Saltwater by Mn3O4@C/Activated Carbon

High capacity rocking-chair capacitive deionization using highly crystalline sodium cobalt hexacyanoferrate (NaCoHCF) electrodes

ZnFe 2 O 4 -infused hierarchically porous carbon nanofiber electrode for enhanced capacitive deionization

Docked ions: Vertical-aligned tubular arrays for highly efficient capacitive deionization

A Prussian blue anode for high performance electrochemical deionization promoted by the faradaic mechanism.

Enhancing the Total Salt Adsorption Capacity and Monovalent Ion Selectivity in Capacitive Deionization Using a Dual-Layer Membrane Coating Electrode

In-Situ Combined Dual-Layer Composite Filtration Electrodes for Wastewater Reclamation

High speed capacitive deionization system with flow-through electrodes

Three-dimensional titanium mesh-based flow electrode capacitive deionization for salt separation and enrichment in high salinity water

Capacitive Deionization System with Ultra-High Salt Adsorption Performance: from Lab Design to Agricultural Applications.

Influence of Ion Exchange Membrane Arrangement on Dual-Channel Flow Electrode Capacitive Deionization: Theoretical Analysis and Experimentations

Battery Electrode Materials with Omnivalent Cation Storage for Fast and Charge-Efficient Ion Removal of Asymmetric Capacitive Deionization

A two-pronged strategy to boost the capacitive deionization performance of nitrogen-doped porous carbon nanofiber membranes