Abstract:We report two 3D printed devices that can be used for electrochemical detection. In both cases, the electrode is housed in commercially available, polymer-based fittings so that the various electrode materials (platinum, platinum black, carbon, gold, silver) can be easily added to a threaded receiving port printed on the device; this enables a module-like approach to the experimental design, where the electrodes are removable and can be easily repolished for reuse after exposure to biological samples. The first printed device represents a microfluidic platform with a 500 × 500 μm channel and a threaded receiving port to allow integration of either polyetheretherketone (PEEK) nut-encased glassy carbon or platinum black (Pt-black) electrodes for dopamine and nitric oxide (NO) detection, respectively. The embedded 1 mm glassy carbon electrode had a limit of detection (LOD) of 500 nM for dopamine and a linear response (R(2) = 0.99) for concentrations between 25-500 μM. When the glassy carbon electrode was coated with 0.05% Nafion, significant exclusion of nitrite was observed when compared to signal obtained from equimolar injections of dopamine. When using flow injection analysis with a Pt/Pt-black electrode and standards derived from NO gas, a linear correlation (R(2) = 0.99) over a wide range of concentrations (7.6-190 μM) was obtained, with the LOD for NO being 1 μM. The second application showcases a 3D printed fluidic device that allows collection of the biologically relevant analyte adenosine triphosphate (ATP) while simultaneously measuring the release stimulus (reduced oxygen concentration). The hypoxic sample (4.8 ± 0.5 ppm oxygen) released 2.4 ± 0.4 times more ATP than the normoxic sample (8.4 ± 0.6 ppm oxygen). Importantly, the results reported here verify the reproducible and transferable nature of using 3D printing as a fabrication technique, as devices and electrodes were moved between labs multiple times during completion of the study.

Composite acoustic medium with simultaneously negative density and modulus.

[Foods and drinks in a 19th century human physiology textbook].

Assembly and characterisation of a multi-component cytoskeletal gel from adrenal medulla.

Bio-inspired 3D Neural Electrodes for the Peripheral Nerves Stimulation Using Shape Memory Polymers

Neonatal jaundice in full-term infants. Role of breast-feeding and other causes.

3D-Printed Microelectrodes for Biological Measurement

Eimeria canadensis in calves.

Direct‐Print 3D Electrodes for Large‐Scale, High‐Density, and Customizable Neural Interfaces

3D printed neural tissues with in situ optical dopamine sensors

3D printed microfluidic devices with integrated versatile and reusable electrodes

Multimodal Integrated Flexible Neural Probe for in Situ Monitoring of EEG and Lactic Acid

Dopamine Measurement Using Engineered CNT–CQD–Polymer Coatings on Pt Microelectrodes

Nanofibrous PEDOT-Carbon Composite on Flexible Probes for Soft Neural Interfacing

Ultrasensitive Monolithic Dopamine Microsensors Employing Vertically Aligned Carbon Nanofibers

Nucleotide sequence of rabbit eIF-4E cDNA.

General Schema Theory for Genetic Programming with Subtree-Swapping Crossover: Part II

Three-dimensional Macroporous Nanoelectronic Networks As Minimally Invasive Brain Probes.

The possible roles of oral yeast ribonucleic acid (Y-RNA) in geriatrics and gerontology.

General In Situ Engineering of Carbon‐Based Materials on Carbon Fiber for In Vivo Neurochemical Sensing

Carbon Nanofiber/PEDOT Based Macro-Porous Composite for High Performance Multifunctional Neural Microelectrode

Isolation of Cache Valley virus and detection of antibody for selected arboviruses in Michigan horses in 1980.