Abstract:A reversed-phase chromatographic process is developed on a centrifugal platform to separate and collect water-soluble dyes from a mixture. A separation column filled with C18-reversed phase silica gel was used to separate the components from a mixture and the eluate was collected by a series of collecting chambers. The purified components can then be identified and extracted from the collecting chambers. The effects of the silica gel's particle size (7-10, 20-45, and 46-63 μm) and the platform's rotational speed (1000, 1500, 2000 RPM) on the separation and collection efficiency were investigated. Experimental results showed that dye separation could be well performed in the column with smaller-sized silica gels (7-10 μm) under a low rotational speed (1000 RPM). However, for the eluate collection, the high eluent flowrate and long processing time resulted in a convective band-broadening problem in the collecting chambers, which affected the recovery ratio of the dyes. Experimental results showed that the convective band broadening effect can be reduced by reducing the flowrate, shortening the collecting time, and switching the eluent to a different composition. The best recovery ratio of the dyes in the current design can be achieved by using the column with a powder size distribution of 46-63 μm and operating at the rotational speed of 1500 RPM. This platform can process a sample volume of 1 μL and the processing time is about 30 min. Since the only instrument used is a motor, the complete chromatographic process, from separation to fraction collection, can be carried out on a centrifugal platform at a low cost.

Modified centrifuge apparatus for heavy liquid separations

Study on Separation Mechanism of Falcon Concentrator and Its Application

Research on Separation Mechanism of Liquid-Solid Fluidized Bed Separator

Liquid solution centrifugation for safe, scalable, and efficient isotope separation

Centrifugal separator, the new technical solution, application in mineral processing

Modeling centrifugal separation process of mineral particles in gravity field using finite element method

Analysis of the Coil Centrifugal Force Field in Countercurrent Chromatography

A ‘smart’ tube holder enables real-time sample monitoring in a standard lab centrifuge

Research on the Performance of a Passive Gas-Liquid Separator Used in Space

Historical use and future development of chemicals for solid–liquid separation in the mineral processing industry

Mixed particles separation based on a cylindrical microfluidic centrifuge

Microfluidic Adaptation of Density-Gradient Centrifugation for Isolation of Particles and Cells

Centrifugal deterministic lateral displacement separation system

Development of a small-scale geotechnical centrifuge

Experimental study on a new gas–liquid separator for a wide range of gas volume fraction

Solution of the Diffusion Equations in a Gas Centrifuge for Separation of Multi Component Mixtures

Comparison of experimental and simulated separation performance in capillary tube-in-manifold devices

Study on Theory of Separation Efficiency of Twin-Spiral Separator in a Grinding-Separation Apatite Process

Liquid chromatography on a centrifugal platform for separation and collection of water-soluble dyes

Experimental study on the separation performance of a novel gas–liquid separator

Centrifugal partition chromatography - A review of recent applications and some classic references