Abstract:The research makes the analysis of cavitating flow field around hydrofoil NACA0009 through both experiments and numerical simulations. We previously proposed an interface effect-based correction model (IE model) for turbulent viscosity correction of cavitation flow, which performed well for hydrofoil cavitation simulation at small angles of attack. This research makes a further evaluation of the IE model. Firstly, the cavitation experiments of the NACA0009 blunt trailing edge hydrofoil with a 10-degree angle of attack are carried out on a closed test platform. The images of quasi-periodic shedding of partial cavitation are obtained. Secondly, the standard k-ε turbulence model, the IE model, and the large eddy simulation (LES model) are used to reproduce the cavitation flow around the hydrofoil. The results show that the standard k-ε model over-predicts the turbulent viscosity of the flow field, resulting in the cavitation region stably attached to the leading edge of the hydrofoil, which can't simulate the unsteady characteristics of the cavity bubbles. The LES model successfully reproduces the process of cavitation structure quasi-periodic shedding off. The IE model modifies the turbulent viscosity in the high shear flow region so that the reentrance flow can reach the leading edge of the hydrofoil and cut the attached cavity off. IE model can properly simulate the macro features of the cavity and the shedding frequency. In each stage of cavitation periodic shedding, the results of the IE model and the LES model on the pressure distribution and velocity field are consistent well. In addition, the calculation time cost of the IE model is basically the same as that of the standard k-ε model, only 0.14 times the LES model costs. The IE model is more suitable for cavitation evaluation in engineering applications.

Prediction of pressure fields on cavitation hydrofoil based on improved compressed sensing technology

Two-Dimensional Prediction of Transient Cavitating Flow Around Hydrofoils Using a DeepCFD Model

Unsteady Flow Prediction from Sparse Measurements by Compressed Sensing Reduced Order Modeling

Unsteady Cavity Pressure Distribution Recovery for Underwater Axisymmetric Body Via Deep Learning

A deep learning approach for hydrofoil optimization of tidal turbines

Reduced Order Data-Driven Analysis of Cavitating Flow over Hydrofoil with Machine Learning

A Pressure-Based Algorithm for Cavitating Flow Computations

Adaptive estimation model: Robust full-state prediction through sparse observations with variable layout and quantity

Numerical Simulation Of Free Surface Water Waves Around Wavy Hydrofoils: Prediction Of Hydrodynamic Coefficients Using Machine Learning

Enhancing hydrofoil velocity estimation through residual learning

Fourier Neural Operator with Boundary Conditions for Efficient Prediction of Steady Airfoil Flows

Numerical prediction of cavitation nuisance on hydrofoils: Combined analysis of cavity dynamics and the aggressiveness of collapsing cavitating structures

Research on hydrodynamic forces prediction of underwater vehicle based on Co-Kriging model

Machine learning-assisted sparse observation assimilation for real-time aerodynamic field perception

An accuracy-enhanced transonic flow prediction method fusing deep learning and reduced-order model

A Flow Feature Detection Method for Modeling Pressure Distribution Around a Cylinder in Non-Uniform Flows by Using a Convolutional Neural Network

Prediction of Aerodynamic Flow Fields Using Convolutional Neural Networks

Machine learning enhanced real-time aerodynamic forces prediction based on sparse pressure sensor inputs

Computational fluid dynamics driven surrogate model to predict hydrodynamic and acoustic properties of propeller boss cap fins

Evaluation of a modified URANS prediction of unsteady cavitating flow around a hydrofoil by comparing with LES results and experimental results

Fast simulation of airfoil flow field via deep neural network