Abstract:Determination of the distribution of a generated acoustic field is valuable for studying ultrasonic transducers, including providing the guidance for transducer design and the basis for analyzing their performance, etc. A method calculating the acoustic field based on laser-measured vibration velocities on the ultrasonic transducer surface is proposed in this paper. Without knowing the inner structure of the transducer, the acoustic field outside it can be calculated by solving the governing partial differential equation (PDE) of the field based on the specified boundary conditions (BCs). In our study, the BC on the transducer surface, i.e. the distribution of the vibration velocity on the surface, is accurately determined by laser scanning measurement of discrete points and follows a data fitting computation. In addition, to ensure the calculation accuracy for the whole field even in an inhomogeneous medium, a finite element method is used to solve the governing PDE based on the mixed BCs, including the discretely measured velocity data and other specified BCs. The method is firstly validated on numerical piezoelectric transducer models. The acoustic pressure distributions generated by a transducer operating in an homogeneous and inhomogeneous medium, respectively, are both calculated by the proposed method and compared with the results from other existing methods. Then, the method is further experimentally validated with two actual ultrasonic transducers used for flow measurement in our lab. The amplitude change of the output voltage signal from the receiver transducer due to changing the relative position of the two transducers is calculated by the proposed method and compared with the experimental data. This method can also provide the basis for complex multi-physical coupling computations where the effect of the acoustic field should be taken into account.

Acoustic analysis of ultrasonic air-borne transducer with concave structure

Mathematical Modelling of One-Dimensional Piezoelectric Transducers Based on Monoclinic Crystals

An analytical model of a piezoelectric unimorph transducer with an aluminum cone

A Flexural Ultrasonic Transducer for Inducing Acoustic Cavitation on Material Surfaces

Analysis of a Planar Acoustic Lens with a Phononic Crystal Structure Constructed with Silicone and Stainless Steel Rods

Investigation of an Active Focusing Planar Piezoelectric Ultrasonic Transducer

Design of Piezoelectric Acoustic Transducers for Underwater Applications

Concave Array Ultrasonic Transducer From Multilayer Piezoelectric Ceramic for Photoacoustic Imaging

Parametric Analysis and Optimization of Radially Layered Cylindrical Piezoceramic/Epoxy Composite Transducers

Investigation of a Multi-Element Focused Air-Coupled Transducer

Multi-mode Ultrasonic Waves Focusing in a Variable Focus Technique for Simultaneous Sound-Velocity and Thickness Measurement

Calculation of Acoustic Field Based on Laser-Measured Vibration Velocities on Ultrasonic Transducer Surface

Planar ultrasonic transducer based on a metasurface piezoelectric ring array for subwavelength acoustic focusing in water

Attenuation of Curved Structural Surfaces in PMUT Measurements

Ultrasound Characteristics of Focused Axisymmetrically Curved Surface Transducers

Curved and Annular Diaphragm Coupled Piezoelectric Micromachined Ultrasonic Transducers for High Transmit Biomedical Applications

Design and Analysis of Ultrasonic Composite Transducer with a Quarter-wave Taper Transition Horn

Investigation on Design Theory and Performance Analysis of Vacuum Capacitive Micromachined Ultrasonic Transducer

Low insertion loss air-coupled ultrasonic transducer with parallel laminated piezoelectric structure

Analytical Modeling and Design of Fresnel Lens Transducers

Research on Effective Electric-Mechanical Coupling Coefficient of Sandwich Type Piezoelectric Ultrasonic Transducer Using Bending Vibration Mode