Abstract:Scramjet engine has presented excellent advantages in hypersonic flight due to its excellent flight performance, such as simple structure, high specific impulse performance and a broad range of cruising speed. However, the stable combustion is extremely formidable in the case of supersonic flow. This work combined several flame-holding strategies, i.e., vertical injection orifices, dual cavities, pilot flame, as well as converting kerosene as supercritical state, aiming at providing a significant reference for the supersonic stable combustion. Meanwhile, as a highly reactive fuel, the effects of hydrogen addition on the mixing and combustion characteristics were investigated in detail. In the process, the total equivalence ratio of kerosene and pilot hydrogen was held constant at 0.8, and the effect of different equivalence ratios of hydrogen (ER H = 0, 0.34 and 0.47) was investigated. The results showed that the addition of hydrogen can effectively enhance the combustion intensity in the combustor. The wall static pressure reached from 230 kPa to 259 kPa with ER H increasing from 0 to 0.47. High pilot hydrogen can make the back pressure propagate toward the entrance, improving the risk to compromise the stable inlet conditions. The shock wave disk was occurred near the entrance, leading to the drastic variation of pressure, temperature and density. The consumption of supercritical kerosene was very fast, while the combustion of hydrogen was relatively lower, even uncomplete burning of hydrogen was observed at exit. With the addition of pilot hydrogen, the heat released in the combustor became less. Specifically, as the ER H increased from 0 to 0.47, the heat released in combustor reduced from 4.1 × 10 4 to 3.2 × 10 4 MJ/s, resulting in the corresponding temperature at the exit decreaing from 1777 to 1607 K, due to the decrement of combustion efficiency resulted from the addition of hydrogen.

Experimental Study on Closed-Loop Control in a Dual-mode Scramjet Combustor with Kerosene Fuel

Aviation kerosene supersonic combustion in dual-mode scramjet

Experimental and numerical investigations on controlled parameter selection methods for kerosene-fueled scramjet

Computational Study of the Effect of Dual Air Swirling Injection on Turbulent Combustion of Kerosene–Air at a High Pressure

Study on Transient Process of Mode Transition in a Scramjet Combustor with Pilot Hydrogen

Effect of pilot hydrogen on the mixing and combustion characteristics in kerosene-fueled scramjet

Effect of Kerosene Dual-Jet Spacing on the Mixing and Combustion Characteristics of a Scramjet Combustor

Investigation of Unsteady Combustion Regimes in a Kerosene-Fueled Scramjet with Air Throttling

Experimental Study on Combustion Modes of a Liquid Kerosene Fueled RBCC Combustor

Experimental Research on Ignition Process of a Supersonic Combustor Based on a Strut Fueled with Liquid Kerosene

Modeling of Supercritical-Pressure Turbulent Combustion of Hydrocarbon Fuels Using A Modified Flamelet-Progress-Variable Approach

Experimental study on the effect of combustor configuration on the performance of dual-mode combustor

Experimental study on ejector-to-ramjet mode transition in a divergent kerosene-fueled RBCC combustor with low total temperature inflow

Effects of Injection Pressure Variation on Mixing in a Cold Supersonic Combustor with Kerosene Fuel

Large Eddy Simulations of Turbulent Combustion of Kerosene-Air in a Dual Swirl Gas Turbine Model Combustor at High Pressures

Investigation on Supersonic Combustion of Kerosene Using Fuel-Rich Hot Gas As Pilot Flame

Investigation of combustion characteristics in a hydrogen-fueled scramjet combustor

Effect of Gas Addition on Liquid Kerosene Combustion in a Scramjet Combustor

Development of a Premixed Combustion Capability for Dual-Mode Scramjet Experiments

Effects of Scramjet Combustor Configuration on Combustor Performance

Study of Combustion Mode Identification Method on Dual-Mode Solid Rocket Scramjet